Clinical evaluation of the failure rate of metallic brackets bonded with orthodontic composites

The purpose of the present study was to evaluate in vivo the failure rate of metallic brackets bonded with two orthodontic composites. Nineteen patients with ages ranging from 10.5 to 38.7 years needing corrective orthodontic treatment were selected for study. The enamel surfaces from second premolars to second premolars were treated with Transbond Plus-Self Etching Primer (3M Unitek). Next, 380 orthodontic brackets were bonded on maxillary and mandibular teeth, as follows: 190 with Transbond XT composite (3M Unitek) (control) and 190 with Transbond Plus Color Change (3M Unitek) (experimental) in contralateral quadrants. The bonded brackets were light cured for 40 s, and initial alignment archwires were inserted. Bond failure rates were recorded over a six-month period. At the end of the evaluation, six bond failures occurred, three for each composite. Kaplan-Meyer method and log-rank test (Mantel-Cox) was used for statistical analysis, and no statistically significant difference was found between the materials (p=0.999). Both Transbond XT and Transbond Plus Color Change composites had low debonding rates over the study period.

The Poisson-exponential distribution: a Bayesian approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Poisson-exponential lifetime distribution

In this paper we proposed a new two-parameters lifetime distribution with increasing failure rate. The new distribution arises on a latent complementary risk problem base. The properties of the proposed distribution are discussed, including a formal proof of its probability density function and explicit algebraic formulae for its reliability and failure rate functions, quantiles and moments, including the mean and variance. A simple EM-type algorithm for iteratively computing maximum likelihood estimates is presented. The Fisher information matrix is derived analytically in order to obtaining the asymptotic covariance matrix. The methodology is illustrated on a real data set. © 2010 Elsevier B.V. All rights reserved.

Influence of biosolids rate on chemical properties of an oxisol in São Paulo, Brazil

Organic residues may cause major health and environmental problems. This is the case in our study area, where more than 10 billion L per year of residential and industrial waste are produced. Land application of biosolids can be an economical solution by recycling waste and can provide valuable fertilizer if used correctly. The aim of this work was to study the effect of biosolids on the chemical properties of an Oxisol. The experiment was located at Ilha Solteira northwest of São Paulo State, Brazil. The soil was cropped to Sorghum bicolor.The field experimental design consisted of random blocks with six treatments and four replications of each treatment. Biosolids were surface applied to four treatments at rates of 5, 10, 20, and 40 Mg ha(-1) on a dry matter basis; in addition, a treatment with mineral fertilizer and a control were included. One year after biosolids application, soil samples were taken at 0-10, 10-20, and 20-40 cm. Organic matter content (Walkley-Black) and pH (CaCl2) were routinely determined. Cation exchange capacity, exchangeable bases (Ca, Mg, K), and P were determined by exchange resin extraction. No significant differences in any of the analyzed properties were found below the 20 cm depth. Extractable phosphorus (P) and potassium (K) increased with increasing biosolids rate in the top 20 cm, whereas calcium (Ca) and (Ma) magnesium content were not significantly influenced by biosolids. Soil pH decreased with increasing biosolids application. The sewage sludge application did not influence the sorghum production in the first year of culture, under unfavorable soil moisture conditions, but it influenced the dry matter.

Proteins, Pathogens, and Failure at the Composite-Tooth Interface

In the United States, composites accounted for nearly 70% of the 173.2 million composite and amalgam restorations placed in 2006 (Kingman et al., 2012), and it is likely that the use of composite will continue to increase as dentists phase out dental amalgam. This trend is not, however, without consequences. The failure rate of composite restorations is double that of amalgam (Ferracane, 2013). Composite restorations accumulate more biofilm, experience more secondary decay, and require more frequent replacement. In vivo biodegradation of the adhesive bond at the composite-tooth interface is a major contributor to the cascade of events leading to restoration failure. Binding by proteins, particularly gp340, from the salivary pellicle leads to biofilm attachment, which accelerates degradation of the interfacial bond and demineralization of the tooth by recruiting the pioneer bacterium Streptococcus mutans to the surface. Bacterial production of lactic acid lowers the pH of the oral microenvironment, erodes hydroxyapatite in enamel and dentin, and promotes hydrolysis of the adhesive. Secreted esterases further hydrolyze the adhesive polymer, exposing the soft underlying collagenous dentinal matrix and allowing further infiltration by the pathogenic biofilm. Manifold approaches are being pursued to increase the longevity of composite dental restorations based on the major contributing factors responsible for degradation. The key material and biological components and the interactions involved in the destructive processes, including recent advances in understanding the structural and molecular basis of biofilm recruitment, are described in this review. Innovative strategies to mitigate these pathogenic effects and slow deterioration are discussed.

Distribuição de fósforo no bulbo molhado, aplicado via fertirrigação por gotejamento com ácido fosfórico

Foram investigados a distribuição do fósforo, o pH e a umidade do solo no bulbo molhado em um Latossolo sem vegetação, após fertirrigação com ácido fosfórico, durante 21 dias. O experimento foi instalado na UNESP/Jaboticabal - SP, em blocos casualizados, com cinco repetições. Os tratamentos foram 0; 30; 60; 90 e 120 kg ha-1 de P2O5, dividindo-se as doses em quatro aplicações semanais, via fertirrigação. Após a última aplicação, foram abertas trincheiras nos bulbos molhados e coletadas amostras de solo em quadrículas de 100 cm². O ácido fosfórico provocou aumento da acidez e elevados teores de fósforo no bulbo, principalmente até 30 cm de distância lateral e até 40 cm de profundidade, em relação ao ponto de gotejamento. O aumento da dose de ácido fosfórico (90 e 120 kg ha-1 de P2O5) provocou maiores teores de fósforo e maior acidificação do solo até 30 cm de distância lateral e até 40 cm de profundidade. A distribuição do fósforo e seu efeito no pH no volume de solo molhado não seguiram a distribuição de umidade no mesmo.

Produtividade e características tecnológicas de cultivares de feijão em resposta à calagem superficial em plantio direto

O objetivo deste trabalho foi avaliar o efeito da aplicação superficial de calcário em plantio direto, na produtividade e nas características tecnológicas dos grãos de cultivares de feijão. O trabalho foi desenvolvido durante dois anos agrícolas, em Latossolo Vermelho distrófico, em condições de sequeiro. O delineamento experimental utilizado foi o de blocos casualizados em esquema de parcelas subdivididas, com quatro repetições. As parcelas foram representadas por cultivares de feijão (Carioca, IAC Carioca Eté, Pérola, IAPAR 81 e Campeão 2) e as subparcelas formadas pelas doses de calcário dolomítico (sem aplicação de calcário; 1,8; 3,6 e 5,4 t ha-1). As cultivares de feijão tiveram desenvolvimento produtivo distinto em função das doses de calcário aplicadas superficialmente no sistema plantio direto. A cultivar Campeão 2 foi mais produtiva nos dois anos de experimentação e a cultivar IAPAR 81 respondeu linearmente ao aumento das doses de calcário no segundo ano agrícola. Houve efeito da interação dos fatores cultivares x doses de calcário para o tempo de cozimento, nos dois anos de experimentação, com aumento dessa característica na cultivar IAPAR 81, em função do incremento das doses de calcário. Comportamento semelhante foi obtido pela cultivar Pérola, porém apenas no segundo ano agrícola. O teor de proteína bruta variou de 210 a 230 g kg-1 e a relação de hidratação ficou próxima de 2,0 não sendo influenciados pelas doses de calcário e pelas cultivares de feijão.

Nucleation kinetics of crystalline phases from a kaolinitic body used in the processing of red ceramics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Poisson-exponential regression model under different latent activation schemes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A computational tool to assist the analysis of the transformer behavior related to lightning

This paper proposes the application of computational intelligence techniques to assist complex problems concerning lightning in transformers. In order to estimate the currents related to lightning in a transformer, a neural tool is presented. ATP has generated the training vectors. The input variables used in Artificial Neural Networks (ANN) were the wave front time, the wave tail time, the voltage variation rate and the output variable is the maximum current in the secondary of the transformer. These parameters can define the behavior and severity of lightning. Based on these concepts and from the results obtained, it can be verified that the overvoltages at the secondary of transformer are also affected by the discharge waveform in a similar way to the primary side. By using the tool developed, the high voltage process in the distribution transformers can be mapped and estimated with more precision aiding the transformer project process, minimizing empirics and evaluation errors, and contributing to minimize the failure rate of transformers. (C) 2011 Elsevier Ltd. All rights reserved.

Hemodynamic effects in dogs anesthetized with isoflurane and remifentanil-isoflurane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O treinamento nos valores da V200, FCpico e distância percorrida de cavalos da raça Árabe e Crioula

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predictive factors of outcome following staphylococcal peritonitis in continuous ambulatory peritoneal dialysis

Background and aims: Staphylococcus epidermidis and other coagulase-negative staphylococci (CoNS) are the most common agents of continuous ambulatory peritoneal dialysis (CAPD) peritonitis. Episodes caused by Staphylococcus aureus evolve with a high method failure rate while CoNS peritonitis is generally benign. The purpose of this study was to compare episodes of peritonitis caused by CoNS species and S. aureus to evaluate the microbiological and host factors that affect outcome. Material and methods: Microbiological and clinical data were retrospectively studied from 86 new episodes of peritonitis caused by staphylococci species between January 1996 and December 2000 in a university dialysis center. The influence of microbiological and host factors (age, sex, diabetes, use of vancomycin, exchange system and treatment time on CAPD) was analyzed by logistic regression model. The clinical outcome was classified into two results (resolution and non-resolution). Results: the odds of peritonitis resolution were not influenced by host factors. Oxacillin susceptibility was present in 30 of 35 S. aureus lineages and 22 of 51 CoNS (p = 0.001). There were 32 of 52 (61.5%) episodes caused by oxacillin-susceptible and 20 of 34 (58.8%) by oxacillin-resistant lineages resolved (p = 0.9713). of the 35 cases caused by S. aureus, 17 (48.6%) resolved and among 51 CoNS episodes 40 (78.4%) resolved. Resolution odds were 7.1 times higher for S. epidermidis than S. aureus (p = 0.0278), while other CoNS had 7.6 times higher odds resolution than S. epidermidis cases (p = 0.052). Episodes caused by S. haemolyticus had similar resolution odds to S. epidermidis (p = 0.859). Conclusions: S. aureus etiology is an independent factor associated with peritonitis non-resolution in CAPD, while S. epidermidis and S. haemolyticus have a lower resolution rate than other CoNS. Possibly the aggressive nature of these agents, particularly S. aureus, can be explained by their recognized pathogenic factors, more than antibiotic resistance.

Lagartos (Squamata: Lacertilia) em áreas de floresta e de pastagem em Espigão do Oeste, Rondônia, sudoeste da Amazônia, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

BONE SPREADER TECHNIQUE: A PRELIMINARY 3-YEAR STUDY

The purpose of this study was to observe the clinical outcome of bone spreading and standardized dilation of horizontally resorbed bone during immediate implant placement using a "screw-type" configuration of expansion and threadformers. Fifty-three patients were included in this study, and 41 edentulous areas in anterior and posterior maxillas were treated. Sixty-eight implants were placed using an insertion torque of at least 40 Ncm. Abutments were delivered 4 to 6 months after implant placement. The overall failure percentage was 4.41% (3 failures). A retrieved analysis of I implant removed at 3 years after placement demonstrated bone resorption down to the level of the third thread. The bone spreader technique is different from Summers' osteotome, both in clinical use and in armamentarium. The main advantage of the crest-expanding technique is that it is a less invasive procedure; the facial wall expands after the medullary bone is compressed against the cortical wall. Within the limits of this preliminary study, the cumulative survival rate for this method of implant placement is 95.58% at 3 years. This study confirms that a bone spreader used in the maxilla shows an unusually low failure rate after 3 years.