A New and Simple Visual Technique Based on Indigo Dye for Determination of Ozone in Ambient Air

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A new fluorescence method for determination of ozone in ambient air

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Polycyclic aromatic hydrocarbons and other selected organic compounds in ambient air of Campo Grande City, Brazil

Fourteen samples of particulate matter and semi-volatile organic compounds were collected during 6 months in the city of Campo Grande, South Mato Grosso State, Brazil. Particle-bound polycyclic aromatic hydrocarbons (PAHs) were collected on Fluoropore PTFE filters and gas-phase PAHs were collected into sorbent tubes with XAD-2 resin. Both types of samples were extracted with a dichloromethane/methanol mixture (4:1 v/v), then the extracts were subjected to gas chromatography-mass spectrometry (GC-MS) analysis. PAHs, oxidized PAH (oxy-PAHs), phenols and methoxyphenols were identified by use of GC retention indices and MS files. The average value obtained for the sum of 15 PAHs was 21.05 ng m(-3) (range: 8.94-62.5 ng m(-3)). The presence of specific tracers and calculations of characteristic ratios (e.g. [Phe]/[Phe] + [Ant]) were used to identify the sources of the emissions of PAHs in the atmospheric samples. Levoglucosan (the anhydride of beta-glucose), retene (1-methyl-7-isopropylphenanthrene) and methoxyphenols (derivatives of syringol and guaiacol) and tracers for wood burning were identified. This study demonstrates that biomass burning from the rural zone is the main source of PAHs and emissions of other substances in the investigated site of Campo Grande. (c) 2004 Elsevier Ltd. All rights reserved.

A Method for Determination of Ammonia in Air using Oxalic Acid-Impregnated Cellulose Filters and Fluorimetric Detection

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Changes in leaf physiology caused by Calacarus heveae (Acari, Eriophyidae) on rubber tree

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

PM2.5 and PM10: The influence of sugarcane burning on potential cancer risk

In Brazil, sugarcane fields are often burned to facilitate manual harvesting, and this burning causes environmental pollution from the large amounts of soot released into the atmosphere. This material contains numerous organic compounds such as PAHs. In this study, the concentrations of PAHs in two particulate-matter fractions (PM2.5 and PM10) in the city of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugarcane plantations) were determined during the sugarcane harvest (HV) and non-harvest (NHV) seasons in 2008 and 2009. The sampling strategy included four campaigns, with 60 samples in the NHV season and 220 samples in the HV season. The PM2.5 and PM10 fractions were collected using a dichotomous sampler (10 L min(-1), 24 h) with Teflon (TM) filters. The filter sets were extracted (ultrasonic bath with hexane/acetone (1:1 v/v)) and analyzed by HPLC/Fluorescence. The median concentration for total PAHs (PM2.5 in 2009) was 0.99 ng m(-3) (NHV) and 3.3 ng m(-3) (HV). In the HV season, the total concentration of carcinogenic PAHs (benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene) was 5 times higher than in the NHV season. B(a)P median concentrations were 0.017 ng m(-3) and 0.12 ng m(-3) for the NHV and HV seasons, respectively. The potential cancer risk associated with exposure through inhalation of these compounds was estimated based on the benzo[a]pyrene toxic equivalence (BaPeq), where the overall toxicity of a PAR mixture is defined by the concentration of each compound multiplied by its relative toxic equivalence factor (TEF). BaPeq median (2008 and 2009 years) ranged between 0.65 and 1.0 ng m(-3) and 1.2-1.4 ng m(-3) for the NHV and HV seasons, respectively. Considering that the maximum permissible BaPeq in ambient air is 1 ng m(-3), related to the increased carcinogenic risk, our data suggest that the level of human exposure to PAHs in cities surrounded by sugarcane crops where the burning process is used is cause for concern. (C) 2010 Published by Elsevier Ltd.

Armazenagem em atmosfera modificada passiva de carambola azeda (Averrhoa carambola L.) cv. 'Golden Star'

Este trabalho avaliou o efeito das embalagens de polietileno de baixa densidade (PEBD), em diferentes espessuras, no prolongamento da vida útil pós-colheita de carambolas cv. 'Golden Star'. Os frutos foram colhidos fisiologicamente maturos, sendo selecionados pela ausência de defeitos e acondicionados nas embalagens de PEBD, constituindo os seguintes tratamentos: T1 - controle (sem embalagem); T2 - PEBD de 6 mim; T3 - PEBD de 10 mim; T4 - PEBD de 15 mim. Os frutos foram armazenados a 12 +/- 0,5 ºC e 95 +/- 5% de UR, por 45 dias, e mais 5 dias a 22 +/- 3ºC e 72 +/- 5% de UR. Vinte e quatro horas após a colheita e a cada nove dias, amostras eram retiradas do armazenamento refrigerado (AR), mantidas por 12 horas em condições ambiente (22 +/- 3ºC e 72 +/- 5% UR) e analisadas quanto à firmeza de polpa (FP), à perda de massa fresca, à coloração da epiderme, aos sólidos solúveis totais (SST), à acidez total titulável (ATT) e à ocorrência de distúrbios fisiológicos. Realizou-se também uma análise sensorial ao final do experimento. A maior firmeza de polpa e acidez total titulável, o melhor padrão de coloração, o menor conteúdo de sólidos solúveis totais, a ausência de manchas e podridões, e a melhor aceitabilidade pelos julgadores foram obtidos com os frutos acondicionados em embalagens de 10 mim.

Qualidade de carambolas azedas cv. 'Golden Star' tratadas com CaCl2 por imersão e armazenadas sob refrigeração

No presente trabalho, avaliou-se o efeito de diferentes concentrações de CaCl2 aplicadas na pós-colheita de carambolas cv. 'Golden Star, durante o armazenamento refrigerado (AR). Os frutos colhidos fisiologicamente maturos foram selecionados pela ausência de defeitos e imersos em soluções de CaCl2, em diferentes concentrações, em temperatura ambiente (22 °C) por 20 minutos. Após aplicação dos tratamentos T1 - controle (0% de CaCl2); T2 - CaCl2 a 1%; T3 - CaCl2 a 2%; T4 - CaCl2 a 3%, e T5 - CaCl2 a 4%, os frutos foram colocados em câmara frigorífica, por 35 dias, a 12 ± 0,5ºC e 95 ± 3%, e mais 3 dias a 22 ± 3°C e 72 ± 5% de umidade relativa (UR). 24 horas após a colheita e a cada sete dias, amostras foram retiradas da AR, mantidas por 12 horas em condições ambiente (22 ± 3°C e 72 ± 5% UR) e analisadas quanto ao teor de cálcio na polpa, perda de massa fresca, coloração da epiderme, firmeza de polpa (FP), sólidos solúveis totais (SST), acidez total titulável (ATT) e a ocorrência de distúrbios fisiológicos. Ao final do experimento, foi feita uma análise sensorial. Observou-se que os frutos imersos em solução de CaCl2 a 2% apresentaram menor perda de massa fresca e maior firmeza de polpa. As carambolas deste tratamento também não apresentaram manchas e podridões e foram preferidas pelos julgadores no teste de preferência. Os sólidos solúveis totais, a acidez total titulável e a coloração não apresentaram diferença estatística entre os tratamentos. Na análise de teores de cálcio adsorvido pelos frutos, determinou-se que quanto, maior a concentração da solução de CaCl2 aplicada, maior a concentração de cálcio presente na polpa.

Dynamic scale theory for characterizing surface morphology of layer-by-layer films of poly(o-methoxyaniline)

The dynamic scale theory and fractal concepts are employed in the characterization of surface morphological properties of layer-by-layer (LBL) films from poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS). The fractal dimensions are found to depend on the procedures to fabricate the POMA/PVS multilayers, particularly with regard to the drying procedures. LBL films obtained via drying in ambient air show a more homogeneous surface, compared to films dried under vacuum or a flow of nitrogen, due to a uniform rearrangement of polymer molecules during solvent evaporation.

Nanocomposites of Styrene-Butadiene Rubber and Synthetic Anatase Obtained by a Colloidal Route and Their Photooxidation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O uso do pneumoperitônio progressivo no pré-operatório das hérnias volumosas da parede abdominal

Context - Correction of voluminous hernias and large abdominal wall defects is a big challenge in surgical practice due to technical difficulties and the high incidence of respiratory and cardiovascular complications. Objectives - To present the authors experience with inducing progressive pneumoperitoneum preoperative to surgical treatment of voluminous hernias of the abdominal wall. Methods - Retrospective study of six patients who presented voluminous hernias of the abdominal wall and were operated after installation of a pneumoperitoneum. The procedure was performed by placing a catheter in the abdominal cavity at the level of the left hypochondrium with ambient air insufflation for 10 to 15 days. Results - Four of the six patients were female and two male. Ages ranged from 42 to 62 years. Hernia duration varied from 5 to 40 years. Four patients had incisional, one umbilical, and one inguinal hernias. Mean pneumoperitoneum time was 11.6 days. There were no complications related to pneumoperitoneum installation and maintenance. All hernias were corrected without technical difficulties. The Lichtenstein technique was used to correct the inguinal hernia, peritoneal aponeurotic transposition for one of the incisional hernias, with the rest corrected using polypropylene mesh. One death and one wall infection were observed post operatively. No recurrences were reported until now, in 4 to 36 months of follow-up. Conclusion - Preoperative progressive pneumoperitoneum is a safe and easy executed procedure, which simplifies surgery and reduces post-operative respiratory and cardiovascular complications. It is indicated for patients with hernias that have lost the right of domain in the abdominal cavity.

Tribocorrosion behaviour of anodic treated titanium surfaces intended for dental implants

Tribocorrosion plays an important role in the lifetime of metallic implants. Once implanted, biomaterials are subjected to micro-movements in aggressive biological fluids. Titanium is widely used as an implant material because it spontaneously forms a compact and protective nanometric thick oxide layer, mainly TiO2, in ambient air. That layer provides good corrosion resistance, and very low toxicity, but its low wear resistance is a concern. In this work, an anodizing treatment was performed on commercial pure titanium to form a homogeneous thick oxide surface layer in order to provide bioactivity and improve the biological, chemical and mechanical properties. Anodizing was performed in an electrolyte containing β-glycerophosphate and calcium acetate. The influence of the calcium acetate content on the tribocorrosion behaviour of the anodized material was studied. The concentration of calcium acetate in the electrolyte was found to largely affect the crystallographic structure of the resulting oxide layer. Better tribocorrosion behaviour was noticed on increasing the calcium acetate concentration. © 2013 IOP Publishing Ltd.

MATIUDE - monitoramento e acesso a transdutores inteligentes (Padrão IEEE 1451) utilizando dispositivos embarcados (celulares e PDA´s)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação energética da secagem combinada de milho na região de Pedrinhas Paulista, SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise do campo térmico de cidades de médio porte: estudo de caso no pólo textil de Americana - SP

Pós-graduação em Geografia - IGCE