Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic

Objective. To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Materials and methods. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) Results. All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. Conclusions. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic. © 2013 Informa Healthcare.

Geração de blastocisto quimérico pela agregação de trofectoderme com a massa celular interna ou com células iPS

Pós-graduação em Ciências Biológicas (Farmacologia) - IBB

Morfo-anatomia, citogenética e palinologia em espécies de ipês (Bignoniaceae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Presupuestos participativos (PPs) e instituciones participativas (IPs) en Brasil: criterios (y marco) para la evaluación de experiencias y casos

This paper identifies relevant criteria for evaluation of participatory budgeting and participatory institutions that are currently adopted by governments of both Brazil and elsewhere, highlighting the importance of a comprehensive assessment that integrates all these criteria. Finally, it is recommended to pay special attention to assessing the desirability of these institutions, which are not always positively for theories on democracy

Efeitos de fontes protéicas na dieta sobre a morfologia intestinal e o desenvolvimento pancreático de leitões recém-desmamados

Objetivou-se neste trabalho analisar os efeitos do uso de hidrolisado protéico do conteúdo celular de levedura (HPCCL), da proteína isolada de soja (PIS), do hidrolisado protéico de mucosa intestinal de suínos (HPMIS) e do leite em pó integral em substituição parcial ao farelo de soja sobre a morfologia do intestino delgado e o desenvolvimento pancreático de leitões aos 7 e 14 dias pós-desmame. Foram utilizados 44 leitões desmamados aos 21 dias de idade, com peso de 5,5 ± 0,6 kg, alimentados desde o desmame com as seguintes dietas isonutritivas: FS - ração à base de milho e farelo de soja; LPI - ração FS + leite em pó integral; LPI+HPMIS - ração LPI mais HPMIS; LPI+PIS - ração LPI mais PIS; LPI+HPCCL- ração LPI mais HPCCL. Os tratamentos não influenciaram a morfologia intestinal dos leitões, evidenciando que nenhuma das fontes protéicas utilizadas foi capaz de minimizar os efeitos deletérios da mudança da alimentação sobre a vilosidade intestinal. Os animais alimentados com LPI+PIS e LPI+HPMIS apresentaram, aos sete dias pós-desmame, o maior desenvolvimento pancreático. Concluiu-se, portanto, que todas as fontes protéicas estudadas foram igualmente adequadas para a formulação de dietas de desmame.

Hidrolisados protéicos de mucosa intestinal, levedura e proteína isolada de soja em dietas com leite em pó integral para leitões desmamados

Avaliou-se o efeito da substituição parcial do farelo de soja (FS) por hidrolisado protéico do conteúdo celular de levedura (HPCCL), proteína isolada de soja (PIS) ou hidrolisado protéico de mucosa intestinal de suínos (HPMIS) em dietas com leite em pó integral (LPI) sobre o desempenho, os níveis séricos de uréia e a incidência de diarréia em leitões desmamados. Foram utilizados 40 leitões desmamados aos 21 dias de idade (20 machos castrados e 20 fêmeas), distribuídos em delineamento em blocos ao acaso, com cinco tratamentos (dietas) e oito repetições. As dietas foram fornecidas em três fases, de acordo com a idade dos animais: fase pré-inicial 1 (21 aos 35 dias de idade): dieta à base de milho e farelo de soja (FS); dieta com 15,0% LPI; dieta com 15,0% LPI + 3,5% HPMIS; dieta com 15,0% LPI + 5,0% de PIS; dieta com 15,0% LPI + 5,0% HPCCL. Na fase pré-inicial 2 (36 aos 49 dias de idade), foi mantida a dieta à base de milho e farelo de soja e o LPI foi reduzido para 7,5% em todas as dietas, o HPMIS para 1,5%, a PIS para 4% e o HPCCL foi mantido em 5%. Na fase inicial (50 aos 70 dias de idade), foi mantida a dieta à base de milho e farelo de soja, o LPI foi retirado de todas as dietas e os animais que nas fases pré-inicial 1 e 2 foram alimentados com as dietas contendo LPI e LPI + HPMIS passaram a ser alimentados com a dieta à base de milho e farelo de soja; a PIS foi reduzida para 3% e o HPCCL para 2,5%. No período de 21 a 35 dias, a dieta LPI + PIS proporcionou maior ganho diário de peso e melhor conversão alimentar. Nas fases seguintes, não houve diferença no desempenho entre as dietas. Até cinco dias após o desmame, os animais alimentados com as rações FS e LPI + PIS apresentaram menor índice de diarréia. Os níveis séricos de uréia não foram influenciados pelas dietas. A utilização de PIS, HPMIS e HPCCL em dietas complexas contendo leite em pó pode consistir em alternativa biologicamente viável em dietas para leitões.

Bark and ambrosia beetle (Coleoptera : Scolytidae) responses to volatiles from aging loblolly pine billets

Many species of bark and ambrosia beetles use host volatiles as cues for breeding site location. In a study where the objectives were to identify the different volatiles released by Pinus taeda L. billets as they age, to determine the arrival sequence of scolytids (Colcoptera: Scolytidae), and to correlate volatile emission by the billets with beetle catches, 25 species of scolytids were trapped. Bark beetles were more attracted to the billets in the beginning of the period. whereas ambrosia beetles arrived later. Among the bark beetles, Dendroctonus terebrans (Olivier) was significantly more attracted during the Ist 3 wk after tree felling, Hylastes tenuis Eichhoff in the Ist 2 wk. Pityophtorus pulicarius (Zimmermann) in weeks 2 and 3, and Ips grandicollis (Eichhoff) was more attracted on weeks 3 and 4. Among the ambrosia beetles, Xyleborinus saxeseni (Ratzeburg) was more attracted to billets during weeks 4-6, whereas Xyleborus pubescens Zimmermann and Xyleborus californicus Wood were more attracted during week 6. The billets showed marked decline in attractiveness to all scolytids after 8 wk. Volatiles collected during the beetle trapping periods included 15 hydrocarbon monoterpenes, 18 oxygenated monoterpenes, 4-allylanisole, and ethanol. The hydrocarbon monoterpenes and 4-allylanisole decreased sharply over time, but oxygenated monoterpenes and ethanol increased up to weeks 4-6, after which they also decreased. Good correlations between certain billet volatiles and catches for some beetle species were obtained, but their biological significance could not be determined.

Influence of Different Ceramics on Resin Cement Knoop Hardness Number

This study evaluated: 1) the effect of different ceramics on light attenuation that could affect microhardness, measured as the Knoop Hardness Number (KHN), of a resin cement immediately and 24 hours after polymerization and 2) the effect of different activation modes (direct light-activation, light activation through ceramics and chemical activation) on the KHN of a resin cement.Resin cement Rely X ARC (3M ESPE) specimens 5.0 mm in diameter and 1.0 nun thick were made in a Teflon mold covered with a polyester film. The cement was directly light activated for 40 seconds with an XL 2500 curing unit (3M ESPE) with 650 mW/cm(2), light activated through ceramic discs of Duceram Plus (DeguDent), Cergogold (DeguDent), IPS Empress (Ivoclar), IPS Empress 2 (Ivoclar), Procera. (NobelBiocare), In Ceram Alumina (Vita) and Cercon (DeguDent), having a 1.2 mm thickness or chemically activated without light application. The resin cement specimens were flattened, and KHN was obtained using an HMV 2 microhardness tester (Shimadzu) with a load of 50 g applied for 15 seconds 100 pin from the irradiated surface immediately and after storage at 37 degrees C for 24 hours. Ten measurements were made for each specimen, with three specimens for each group at each time. The data were submitted to ANOVA and Tukey's test (p=0.05). The KHN of the resin cement was not only affected by the mode of activation, but also by the post-activation testing time. The mean KHN of the resin cement for chemical activation and through all ceramics showed statistically significant lower values compared to direct activation immediately and at 24 hours. The KHN for 24 hours post-activation was always superior to the immediate post-activation test except with direct activation. The most opaque ceramics resulted in the lowest KHN values.

All-Ceramic Crowns Over Single Implant Zircon Abutment. Influence of Young's Modulus on Mechanics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the activation mode of a self-etch resin-based luting cement upon the metabolism of odontoblast-like cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In Vitro Study of Fracture Load and Fracture Pattern of Ceramic Crowns: A Finite Element and Fractography Analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Isolado protéico de semente de goiaba (Psidium guajava): caracterização de propriedades funcionais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Shear bond strength of a ceramic to Co-Cr alloys

Statement of problem. Different combinations of Co-Cr alloys bonded to ceramic have been used in dentistry; however, the bond strength of ceramic to metal can vary because of different compositions of these alloys.Purpose. The purpose of this study was to evaluate the shear bond strength of a dental ceramic to 5 commercially available Co-Cr alloys.Material and methods. Five Co-Cr alloys (IPS d.SIGN 20, IPS d.SIGN 30, Remanium 2000, Heranium P, and Wirobond C) were tested and compared to a control group of an Au-Pd alloy (Olympia). Specimen disks, 5 mm high and 4 mm in diameter, were fabricated with the lost-wax technique. Sixty specimens were prepared using opaque and dentin ceramics (VITA Omega 900), veneered, 4 mm high and 4 mm in diameter, over the metal specimens (n = 10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 0.5 mm/min. After shear bond testing, fracture surfaces were evaluated in a stereomicroscope under x25 magnification. Ultimate shear bond strength (MPa) data were analyzed with 1-way ANOVA and the Tukey HSD test (alpha = .05).Results. The mean (SID) bond strengths (MPa) were: 61.4 (7.8) for Olympia; 94.0 (18.9) for IPS 20; 96.8 (10.2) for I PS 30; 75.1 (12.4) for Remanium; 71.2 (14.3) for Heranium P; and 63.2 (10.9) for Wirobond C. Mean bond strengths for IPS 20 and IPS 30 were not significantly different, but were significantly (P<.001) higher than mean bond strengths for the other 4 alloys, which were not significantly different from each other.Conclusions. Bond strength of a dental ceramic to a Co-Cr alloy is dependent on the alloy composition.