Modelagem IEEE 1815 DNP3 em VHDL e análise de comunicação SG via IEEE 802.15.4 e IEEE 802.11

Pós-graduação em Engenharia Elétrica - FEIS

A Dataset for Evaluating Intrusion Detection Systems in IEEE 802.11 Wireless Networks

Internet access by wireless networks has grown considerably in recent years. However, these networks are vulnerable to security problems, especially those related to denial of service attacks. Intrusion Detection Systems(IDS)are widely used to improve network security, but comparison among the several existing approaches is not a trivial task. This paper proposes building a datasetfor evaluating IDS in wireless environments. The data were captured in a real, operating network. We conducted tests using traditional IDS and achieved great results, which showed the effectiveness of our proposed approach.

An approach to mitigate denial of service attacks in ieee 802.11 networks

Wireless networks are widely deployed and have many uses, for example in critical embedded systems. The applications of this kind of network meets the common needs of most embedded systems and addressing the particularities of each scenario, such as limitations of computing resources and energy supply. Problems such as denial of service attacks are common place and cause great inconvenience. Thus, this study presents simulations of denial of service attacks on 802.11 wireless networks using the network simulator OMNeT++. Furthermore, we present an approach to mitigate such attack, obtaining significant results for improving wireless networks.

Modelo de simulação NS-2 para o protocolo DNP3 sobre o protocolo de rede sem fio IEEE 802.15.4 para simulação de baixo custo de aplicação smart grid

Pós-graduação em Engenharia Elétrica - FEIS

Instalação de uma rede mesh metropolitana utilizando o padrão IEEE 802.11a e implementação do serviço Voip (Wman-Voip)

Pós-graduação em Engenharia Elétrica - FEIS

A NS-2 simulation model for DNP3 protocol over IEEE 802.15.4 wireless protocol toward low cost simulation of Smart Grid applications

Faced with an imminent restructuring of the electric power system, over the past few years many countries have invested in a new paradigm known as Smart Grid. This paradigm targets optimization and automation of electric power network, using advanced information and communication technologies. Among the main communication protocols for Smart Grids we have the DNP3 protocol, which provides secure data transmission with moderate rates. The IEEE 802.15.4 is another communication protocol also widely used in Smart Grid, especially in the so-called Home Area Network (HAN). Thus, many applications of Smart Grid depends on the interaction of these two protocols. This paper proposes modeling, in the traditional network simulator NS-2, the integration of DNP3 protocol and the IEEE 802.15.4 wireless standard for low cost simulations of Smart Grid applications.

Segurança em redes sem fio: estudo sobre o desenvolvimento de conjuntos de dados para comparação de IDS

Pós-graduação em Engenharia Elétrica - FEIS

O emprego de técnicas de qualidade de serviço em redes sem fio aplicado à automação predial

Pós-graduação em Engenharia Elétrica - FEIS

Kappa-PSO-ARTMAP Fuzzy: uma metodologia para detecção de intrusos baseado em seleção de atributos e otimização de parâmetros numa rede neural ARTMAP Fuzzy

Pós-graduação em Engenharia Elétrica - FEIS

Integration of wireless sensor networks to the internet of things using a 6LoWPAN Gateway

The Internet of Things is a new paradigm where smart embedded devices and systems are connected to the Internet. In this context, Wireless Sensor Networks (WSN) are becoming an important alternative for sensing and actuating critical applications like industrial automation, remote patient monitoring and domotics. The IEEE 802.15.4 protocol has been adopted as a standard for WSN and the 6LoWPAN protocol has been proposed to overcome the challenges of integrating WSN and Internet protocols. In this paper, the mechanisms of header compression and fragmentation of IPv6 datagrams proposed in the 6LoWPAN standard were evaluated through field experiments using a gateway prototype and IEEE 802.15.4 nodes.

Development of heterogeneous node network using microcontroller with protocols CAN and Zigbee

In this paper was proposed the development of an heterogeneous system using the microcontroller (AT90CANI28) where the protocol model CAN and the standard IEEE 802.15.4 are connected. This module is able to manage and monitor sensors and actuators using CAN and, through the wireless standard 802.15.4, communicate with the other network modules. © 2011 IEEE.

An approach to implement data fusion techniques in wireless sensor networks using genetic machine learning algorithms

Wireless Sensor Networks (WSNs) can be used to monitor hazardous and inaccessible areas. In these situations, the power supply (e.g. battery) of each node cannot be easily replaced. One solution to deal with the limited capacity of current power supplies is to deploy a large number of sensor nodes, since the lifetime and dependability of the network will increase through cooperation among nodes. Applications on WSN may also have other concerns, such as meeting temporal deadlines on message transmissions and maximizing the quality of information. Data fusion is a well-known technique that can be useful for the enhancement of data quality and for the maximization of WSN lifetime. In this paper, we propose an approach that allows the implementation of parallel data fusion techniques in IEEE 802.15.4 networks. One of the main advantages of the proposed approach is that it enables a trade-off between different user-defined metrics through the use of a genetic machine learning algorithm. Simulations and field experiments performed in different communication scenarios highlight significant improvements when compared with, for instance, the Gur Game approach or the implementation of conventional periodic communication techniques over IEEE 802.15.4 networks. © 2013 Elsevier B.V. All rights reserved.

Desenvolvimento de um sistema de medição de baixo custo para a monitoração de alimentadores aéreos de distribuição de energia elétrica da classe 15 KV

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos seguros para comunicação em sistemas de rede sem fio de múltiplos saltos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

WiMAX interoperabilidade mundial para acesso de microondas

This paper presents a technique dubbed WiMAX radio link, the IEEE 802.16 was completed in October 2001 and published on April 8, 2002 and is constantly updated, this technology specifies an interface for wireless metropolitan networks (WMAN) and is under control of the WiMAX Forum, which is a group of companies responsible for the dissipation of this technology in the world, the great benefit of this standard is to offer broadband Internet connection in areas where there is no infrastructure such as fiber optics that has a cost higher. The main purpose of this paper is to present the theoretical and technical characteristics of this technology for both the standard for fixed and mobile standard, regulation of frequency bands by the FCC and description of the physical layer, through to basic concepts are used in many other types of radio link and technologies have been adapted and updated for this little-known standard, allowing a greater range and speed, which are specified and differentiate these advancements is one of the contributions of the work done here. After the theoretical conceptualization stage, a real case study has been inserted in this work to demonstrate the effectiveness of this technology deployed. The idea of presenting this case study is linked to a better view of the use of standard in the market, nationwide