Continental degassing of He-4 by surficial discharge of deep groundwater

Radiogenic He-4 is produced by the decay of uranium and thorium in the Earths mantle and crust. From here, it is degassed to the atmosphere(1-5) and eventually escapes to space(1,5,6). Assuming that all of the He-4 produced is degassed, about 70% of the total He-4 degassed from Earth comes from the continental crust(2,-5,7). However, the outgoing flux of crustal He-4 has not been directly measured at the Earths surface(2) and the migration pathways are poorly understood(2-4,7,8). Here we present measurements of helium isotopes and the long-lived cosmogenic radio-isotope Kr-81 in the deep, continental-scale Guarani aquifer in Brazil and show that crustal He-4 reaches the atmosphere primarily by the surficial discharge of deep groundwater. We estimate that He-4 in Guarani groundwater discharge accounts for about 20% of the assumed global flux from continental crust, and that other large aquifers may account for about 33%. Old groundwater ages suggest that He-4 in the Guarani aquifer accumulates over half- to one-million-year timescales. We conclude that He-4 degassing from the continents is regulated by groundwater discharge, rather than episodic tectonic events, and suggest that the assumed steady state between crustal production and degassing of He-4, and its resulting atmospheric residence time, should be re-examined.

Groundwater geochemical evolution in the northern portion of the Guarani Aquifer System (Brazil) and its relationship to diagenetic features

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Changes on emitter discharge under different water temperature and pressure

The study was conducted at the Research Laboratory of Hydraulic and Irrigation Group in the Rural Engineering Department, Technical University of Madrid (Universidad Politecnica de Madrid), Madrid, Spain. Water temperatures of 20, 30, 40 degrees C and system pressures often encountered in irrigation practices of 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190 and 200 k Pa were applied to determine the effects of different water temperatures and pressures on emitter discharge. Non-pressure compensating in-line emitter which has turbulent flow regime with a long-path (labyrinth), emitter discharge was 4 L h(-1) at system pressure of 100 kPa according to the manufacturer recommended, was used. Emitters were spaced 20 cm along the drip laterals with 16 mm diameter. Discharge equations and coefficients of variation related to temperatures of 20, 30 and 40 degrees C were obtained as q = 0.375H(0.51), q = 0.358H(0.52), q = 0.346H(0.53) and 2.68, 2.09, 3.65, respectively. Discharge of the emitter was affected by different system pressures and increased as potentially (R = 0993-0996). In general. the emitter discharge increased with increasing temperature. However, especially in the common system pressures of 90-120 k Pa, differences of obtained emitter discharges between the different water temperatures were not significant (1%).

Treatment of PET and PU polymers by atmospheric pressure plasma generated in dielectric barrier discharge in air

Plasma treatments are frequently employed to modify surface properties of materials such as adhesivity, hydrophobicity, oleophobicity etc. Present work deals with surface modification of common commercial polymers such as polyethylene terephthalate (PET) and polyurethane (PU) by an air dielectric barrier discharge (DBD) at atmospheric pressure. The DBD treatment was performed in a plain reactor in wire-duct geometry (non-uniform field reactor), which was driven by a 60 Hz power supply. Material characterization was carried out by water contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The plasma-induced modifications are associated with incorporation of polar oxygen and nitrogen containing groups on the polymer surface. The AFM analysis reveals that the plasma treatment roughens the material surface. Due to these structural and morphological changes the surface of DBD-treated polymers becomes more hydrophilic resulting in enhanced adhesion properties. (C) 2010 Elsevier B.V. All rights reserved.

Surface modification of siloxane containing polyurethane polymer by dielectric barrier discharge at atmospheric pressure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modification of polyethylene terephthalate by atmospheric pressure dielectric barrier discharge (DBD) in view of improving the polymer wetting properties

Surface treatment of polymers by discharge plasmas has increasingly found industrial applications due to its capability of modifying uniformly the surface without changing the material bulk properties. This work deals with surface modification of polyethylene terephthalate (PET) by a dielectric barrier discharge (DBD) at atmospheric pressure. The treatments were conducted in air, nitrogen or argon plasma. The polymer surface was characterized by contact angle measurement, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The results show that the plasma treatment introduces oxygen-and nitrogen-related polar groups on the polymer surface and promotes the surface roughening. Both plasma-induced surface modifications contribute to the enhancement of the polymer wettability.

Bacterial sterilization by a dielectric barrier discharge (DBD) in air

Cold atmospheric plasma treatment of microorganisms and living tissues has become a popular topic in modern plasma physics and in medical science. The plasma is capable of bacterial inactivation and noninflammatory tissue modification, which makes it an attractive tool for treatment of skin diseases, open injuries and dental caries. Because of their enhanced plasma chemistry, Dielectric Barrier Discharges (DBDs) have been widely investigated for some emerging applications such as biological and chemical decontamination of media at ambient conditions. Despite the high breakdown voltage in air at atmospheric pressure, the average current of DBD discharges is low. Therefore, a DBD can be applied in direct contact with biological objects without causing any damage. In this work a 60 Hz DBD reactor, which generates cold atmospheric plasma inside Petri dishes with bacterial culture, is investigated. Samples of Staphylococcus aureus, a Gram-positive bacterium and Escherichia coil a Gram-negative bacterium were selected for this study. The bacterial suspensions were evenly spread on agar media planted in Petri dishes. The reactor electrodes were placed outside the Petri dish, thus eliminating the risk of samples microbial contamination. The covered Petri dish with agar medium in it serves as dielectric barrier during the treatment. The plasma processing was conducted at same discharge power (similar to 1.0 W) with different exposure time. Sterilization of E. coil and S. aureus was achieved for less than 20 min. Plasma induced structural damages of bacteria were investigated by Scanning Electron Microscopy. (C) 2010 Elsevier B.V. All rights reserved.

Dielectric spectroscopy and thermally stimulated discharge current in PEEK film

A permissividade complexa de filmes de poli(eter-eter-cetona) (PEEK) foram investigados num grande intervalo de frequência. Não foram observados picos de relaxação no intervalo de frequência de 1,0 Hz a 10(5) Hz, mas no intervalo de baixa frequência (10-4 Hz) há uma evidência de pico, o qual também pode ser observado com medidas de corrente de despolarização termo-estimulada (TSDC). Este pico está relacionado com a transição vítrea do polímero. A energia de ativação relacionada a esta relaxação dipolar foi obtida e ovalor é Ea = 0,44 eV, que é similar à energia de ativação de muitos polímeros sintéticos. As cargas espaciais se mostraram importantes no mecanismo de condução como evidenciado nas medidas da corrente de despolarização.

Surface characteristics analysis of polypropylene treated by dielectric barrier discharge at atmospheric pressure

Polypropylene (PP) samples were treated by Dielectric Barrier Discharge (DBD) in order to modify their surface characteristics. The XPS analysis reveals that the DBD treatment added oxygen atoms to the PP surface. These polar groups cause increase in the wettability as shown by water contact angle measurements. The formation of low-molecular-weight oxidized materials (LMWOMs) in the form of small nodules on the PP surface was observed by atomic force microscopy (AFM). The presence of oxygen polar groups on the PP surface was also confirmed by infrared spectroscopy (FTIR). All analysis were performed before and after rinsing the treated samples in water and showed that the LMWOM can be removed from the surface by polar solvents.

Corona Discharge Model for Transmission Lines by Lumped Elements

This paper shows the insertion of corona effect in a transmission line model based on lumped elements. The development is performed considering a frequency-dependent line representation by cascade of pi sections and state equations. Hence, the detailed profile of currents and voltages along the line, described from a non-homogeneous system of differential equations, can be obtained directly in time domain applying numerical or analytic solution integration methods. The corona discharge model is also based on lumped elements and is implemented from the well-know Skilling-Umoto Model.

The use of vinasse as an amendment to ex-situ bioremediation of soil and groundwater contaminated with diesel oil

Este trabalho investigou a possibilidade de se usar a vinhaça como um agente estimulador de processos de biorremediação ex-situ. Amostras de água subterrânea e solo foram coletadas em três postos de combustíveis. A biorremediação do solo foi simulada em frascos de Bartha, usados para medir a produção de CO2, durante 48 dias, onde a vinhaça foi adicionada a uma concentração de 33 mL.Kg-1 de solo. A eficiência de biodegradação também foi medida pela quantificação de hidrocarbonetos totais de petróleo (TPH) por cromatografia gasosa. A biorremediação da água subterrânea foi realizada em experimentos laboratoriais simulando condições aeradas (bioreatores) e não aeradas (frascos de DBO). em ambos os casos, a concentração de vinhaça foi de 5 % (v/v) e diferentes parâmetros físico-químicos foram avaliados durante 20 dias. Embora um aumento da fertilização e da população microbiana do solo foram obtidos com a vinhaça, esta estratégia não se mostrou adequada em aumentar a eficiência da biorremediação dos solos contaminados com óleo diesel. A adição de vinhaça às águas subterrâneas contaminadas teve efeitos negativos na biodegradação dos hidrocarbonetos, uma vez que a vinhaça, como uma fonte de carbono facilmente assimilável, foi preferencialmente consumida.

Pulmonary receptors in reptiles: discharge patterns of receptor populations in snakes versus turtles

This study examines the effects of lung inflation/deflation with and without CO2 on the entire population of pulmonary receptors in the vagus nerve in two species of snakes and two species of turtles. We asked the question, how does the response of the entire mixed population of pulmonary stretch receptors (PSR) and intrapulmonary chemoreceptors (IPC) in species possessing both differ from that in species with only PSR? This was studied under conditions of artificial ventilation with the secondary goal of extending observations on the presence/absence of IPC to a further three species. Our results indirectly illustrate the presence of IPC in the Burmese python and South American rattlesnake but not the side necked turtle, adding support to the hypothesis that IPC first arose in diapsid reptiles. In both species of snake, CO2-sensitive discharge (presumably from IPC) predominated almost to the exclusion of CO2-insensitive discharge (presumably arising from PSR) while the opposite was true for both species of turtle. The data suggest that for animals breathing air under conditions of normal metabolism there is little to distinguish between the discharge profiles of the total population of receptors arising from the lungs in the different groups. Interestingly, however, under conditions of elevated environmental CO2 most volume-related feedback from the lungs is abolished in the two species of snakes, while under conditions of elevated metabolic CO2, it is estimated that volume feedback from the lungs would be enhanced in these same species.

Implications of groundwater weathered profile interactions to the mobilization of radionuclides

This study reports the nature and extent of open-system interaction between groundwater and a weathered profile developed in the high grade thorium and REE ore body in Morro do Ferro, Pocos de Caldas plateau. The radioelement mobility in the shallow oxidizing environment was considered by using chemical data in conjunction with U-234/U-238, Ra-226/Th-230, Th-230/U-234, Th-228/Th-232, Ra-228/Th-232 and Th-230/Ra-228 activity ratios (AR's) for borehole spoil and groundwater samples.Recharging groundwater from the studied borehole has low salinity values, with total dissolved solids content of 14.7 mg/l and total ionic strength of 0.00018. The ratio of the weight of dissolved radioelement per unit volume of solution to the weight of radioelement in solid phase per unit weight of solid phase showed that the radioelement solubility in the studied waters varied according to the following order: radium> uranium >thorium.U-234/U-238 AR's less than 1 were measured in solid phase and can justify the enhancement of U-234 in solution. Ra-226/Th-230 AR's greater than 1 and Th-230/U-234 AR'S less than 1 were evaluated between 20 and 27 m in depth, where a 2.1-m thick magnetite dike was intersected. These ratios could be justified by deposition of U and Ra associated with Fe-Mn oxides and kaolinite, where mineral saturation indices evaluated from the available data confirm this possibility. Covariations among disequilibria involving Th-228/(228) Ra and Ra-228/Th-232 AR's showed the preferential removal of Ra-228 relative to Tn isotopes, Th-228 and Th-232. The recent deposition of radium within the timescale of at least the last 35 years also is suggested. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

U-ages in soils and groundwater evidencing wet periods 400-600 kyr ago in southeast Brazil

U-238 and its radiogenic daughter U-234 have been utilized for dating soil formation and groundwater residence time during the last 1.5 million years, in this case based on the U-clissolution/precipitation occurring during modifications of the oxidation-reduction conditions. In this paper, we report a 400-600 kyr proxy of wet periods from sediments occurring in a soil profile developed over rocks outcropping at the Parana sedimentary basin in Brazil, and from groundwater exploited of Guarani aquifer at the same basin. The approaches indicated successful use of the U-modeled ages for suggesting wet periods exceeding the past 116-210 kyr from previous studies. (C) 2007 Elsevier Ltd. All rights reserved.