Monitoramento da atenuação natural de pluma de contaminação pelo método de radar de penetração no solo (GPR)

O monitoramento da atenuação natural em áreas contaminadas tem se mostrado uma técnica alternativa e de baixo custo para a remediação de áreas contaminadas. A degradação por microorganismos é um dos processos mais importantes na atenuação natural de contaminantes, especialmente compostos de fase líquida não aquosa (NAPL). em muitos casos, a ação efetiva deste processo resulta na geração de ácidos orgânicos, que sob elevadas concentrações ocasionam a dissolução de minerais presentes em subsuperfície onde se encontra a contaminação, com conseqüente liberação de íons. O aumento na quantidade de íons colabora para o aumento da condutividade elétrica do meio. O princípio físico da técnica de Radar de Penetração no Solo (GPR) é a emissão de ondas eletromagnéticas de alta freqüência. A propagação da onda eletromagnética é condicionada à freqüência de sinal emitido e as propriedades elétricas do meio. O aumento da condutividade elétrica do meio resulta na atenuação do sinal e, por conseqüência, na diminuição da profundidade de penetração da onda eletromagnética. Este fator permite o monitoramento de áreas contaminadas sob atenuação natural a partir de análises temporais com o GPR. Este trabalho apresenta um estudo comparativo entre perfis de GPR adquiridos em 1998 e 2003 em uma área contaminada por compostos de fase líquida leve não aquosa (LNAPL), sob atenuação natural. Os resultados indicam um aumento da condutividade elétrica do meio, a partir da atenuação acentuada do sinal GPR observada nas seções de 2003. Este aumento pode estar associado à liberação de íons por dissolução de minerais, pelo ataque de ácidos orgânicos resultantes do processo de biodegradação.

Detecção de cavidades em arenitos utilizando gravimetria, eletrorresistividade e GPR

Este trabalho mostra os resultados obtidos com a realização de ensaios geofísicos na em áreas de lavra de areia, no município de Descalvado, SP. O objetivo dos ensaios é o de detectar cavidades no interior de arenitos, pertencentes às Formações Pirambóia e Botucatu. Estas cavidades formaram-se com o rebaixamento do lençol freático, necessário para as operações de extração da areia. As técnicas geofísicas utilizadas foram: gravimetria, eletrorresistividade (caminhamento elétrico dipolo-dipolo) e radar de penetração no solo (GPR). Na primeira etapa dos trabalhos foram utilizados a gravimetria e a eletrorresistividade em uma bancada onde ocorreu um desmoronamento devido ao abatimento do teto de uma cavidade. Os resultados obtidos com estas duas técnicas foram coerentes pois a gravimetria mostrou baixos gravimétricos indicando uma ausência de massa na área de influência da cavidade e o caminhamento detectou um esperado aumento de resistividade elétrica nesta mesma área. Na segunda etapa, com a realização dos ensaios de GPR em uma bancada próxima à anterior, foi possível detectar cavidades por meio das feições hiperbólicas detectadas nos radargramas.

GPR survey in the Taquari River, Pantanal Wetland, west-central Brazil

A pioneer GPR - Ground Penetrating Radar - survey was carried out in the Pantanal of Mato Grosso State, westcentral region of Brazil. Fieldwork acquisitions were carried out in February/2001 and August/2002 in order to understand avulsion processes that are occurring within the Taquari alluvial megafan. The main subjects were to map channel, crevasses and floodplain morphology, as well as active sedimentary bedforms. Many GPR profiles were surveyed in the medium and lower Taquari River course. Subaqueous megaripples and exposed sand bars inside the Taquari channel were identified in the medium fan area. Similar features were observed in the lower fan channels, where there are also many crevasses in the marginal levees. During the flooding seasons the flow splays out in the floodplain where new distributary channels are being formed. As shown by GPR data, in the lower fan the Taquari channel is topographically higher than the adjacent floodplain, situation in which avulsion is a natural process of river course shifting. The lack of information about river morphology and dynamics is a major strain to better understand the sediment transport and the avulsion processes in the Taquari megafan. In this context, the GPR data obtained in wet and dry seasons, integrated to sedimentological information, have been very important to characterize the fluvial dynamics and the avulsion phenomena.

Application of GPR in the study of a modern alluvial megafan: The case of the Taquari river in Pantanal wetland, West-Central Brazil

A novel and timely ground penetrating radar (GPR) survey has been carried out in Pantanal from Mato Grosso State, west-central Brazil. Fieldwork was carried out on February/2001 and August/2002 in an attempt to understand avulsion processes that are occurring within Taquari alluvial megafan. The main objectives were to map channel, crevasse and floodplain morphology, as well as active sedimentary bedforms. Many GPR profiles were acquired in the medium and lower Taquari River course. Subaqueous megaripples and exposed sand bars were identified in the medium fan area. Similar features were observed in the lower fan channels, where there were many crevasses in the marginal levees. During the flooding seasons, the flow splays out on to the floodplain, where new distributary channels are being formed. GPR data show that the lower fan, Taquari channel is topographically higher than the adjacent floodplain, thus favoring avulsion as a natural process of river course shifting. GPR data obtained during the wet and dry seasons, together with sedimentology information have been very important in characterizing the fluvial dynamics, and avulsion phenomena. © 2005 Springer Science+Business Media, Inc.

Radarfacies and sedimentological analysis: study of sedimentary substrate from an archaeological site (shell mound), southern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapping surface deformation in open pit iron mines of Carajas Province (Amazon Region) using an integrated SAR analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Raman Lidar monitors emissions from sugar cane fires in the State of São Paulo: a pilot-project integrating radar, sodar, aerosol and gas observations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance and ruminal morphologic characteristics of Saanen kids fed ground, pelleted or extruded total ration

The aim of the present study was to determine feed intake and average weight gain and to evaluate the ruminal morphologic characteristics of Saanen kids slaughtered at 30, 45 and 60 days of age, according to a completely randomized design. Thirty-six non-castrated male Saanen kids were fed ground total ration, pelleted total ration, or extruded total ration. Feed intake and refusals were controlled daily and the animals were weighed at birth and then once a week. Newborn kids received a milk replacer and were weaned at 45 days. Immediately after slaughter, the animals were eviscerated, the entire digestive apparatus was removed from the carcass. The reticulo-rumen was separated, emptied, washed and weighed. Samples were collected from the dorsal sac, pillar area and ventral sac of the rumen, fixed for about 24h in Bouin's solution, dehydrated, embedded in Histosec and cut into 5 mu m sections. Results showed that dry matter intake (DMI) at weaning and post-weaning and weight gain were higher (P < 0.05) in animals that received the pelleted total ration. The weight of the reticulo-rumen accompanied body development and was heavier in these animals. Histologically, after weaning ruminal papillae were more developed in animals that received pelleted total ration. Length of papillae increased with increase of age. The ratio of papillary height to papillary width increased with age in the ventral sac and until weaning (P > 0.05). We conclude that the pelleting process of the total ration favored increased intake, with a 46.7% increase in weight gain and increase in rumen weight and papillae length, suggesting that best results are obtained with this processing. In general, no difference was observed between the results obtained with extruded and ground total ration, although animals fed extruded total ration showed an increase in rumen weight and papillae width. (c) 2004 Elsevier B.V All rights reserved.

Performance of four tomato cultivars, with and without ground cover

The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.

Atributos polarimétricos de imagem radar na inferência de parâmetros morfológicos de macrófitas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of forecasting capabilities of ground surfaces valuation using artificial neural networks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigation on Surface Finishing of Components Ground with Lapping Kinematics: Lapgrinding Process

Over the last three decades, researchers have responded to the demands of industry to manufacture mechanical components with geometrical tolerance, dimensional tolerance, and surface finishing in nanometer levels. The new lapgrinding process developed in Brazil utilizes lapping kinematics and a flat grinding wheel dressed with a single-point diamond dresser in agreement with overlap factor (U(d)) theory. In the present work, the influences of different U(d) values on dressing (U(d) = 1, 3 e 5) and grain size of the grinding wheel made of silicon carbide (SiC = 800, 600 e 300 mesh) are analyzed on surface finishing of stainless steel AISI 420 flat workpieces submitted to the lapgrinding process. The best results, obtained after 10 minutes of machining, were: average surface roughness (Ra) 1.92 nm; 1.19 mu m flatness deviation of 25.4 mm diameter workpieces and mirrored surface finishing. Given the surface quality achieved, the lapgrinding process can be included among the ultra-precision finishing processes and, depending on the application, the steps of lapping followed by polishing can be replaced by the proposed abrasive process.

Waveshapes of continuing currents and properties of M-components in natural positive cloud-to-ground lightning

This work analyses the waveshapes of continuing currents and parameters of M-components in positive cloud-to-ground (CG) flashes through high-speed GPS synchronized videos. The dataset is composed of only long continuing currents (with duration longer than 40 ms) and was selected from more than 800 flashes recorded in Sao Jose dos Campos (45.864 degrees W, 23.215 degrees S) and Uruguaiana (29.806 degrees W, 57.005 degrees S) in Southeast and South of Brazil, respectively, during 2003 to 2007 summers. The videos are compared with data obtained by the Brazilian Lightning Location System (BrasilDAT) in order to determine the polarity of each flash and select only positive cases. There are only two studies of waveshapes of continuing currents in the literature. One is based on direct current measurements of triggered lightning, in which four different types of waveshapes were observed; and the other is based on measurements of luminosity variations in high-speed videos of CG negative lightning, in which besides the four types above mentioned two additional types were observed. The present work is an extension of the latter, using the same method but now applied to obtain the waveshapes of positive CG lightning. As far as the authors know, this is the first report on M-components in positive continuing currents. We also have used the luminosity-versus-time graphs to observe their occurrence and measure some parameters (duration, elapsed time and time between two successive M-components), whose statistics are presented and compared in detail to the data for negative flashes. We have plotted a histogram of the M-components elapsed time over the total duration of the continuing current for positive flashes, which presented an exponential decay (correlation coefficient: 0.83), similar to what has been observed for negative flashes. (C) 2008 Elsevier B.V. All rights reserved.