Post-larval morphology, growth, and development of Uca cumulanta Crane, 1943 (Crustacea, Decapoda, Ocypodidae) under laboratory conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessing the above-ground biomass of a complex tropical rainforest using a canopy crane

Current estimates of the total biomass in tropical rainforests vary considerably; this is due in large part to the different approaches that are used to calculate biomass. In this study we have used a canopy crane to measure the tree architectures in a 1 ha plot of complex mesophyll vine forest at Cape Tribulation, Australia. Methods were developed to measure and calculate the crown and stem biomass of six major species of tree and palm (Alstonia scholaris (Apocynaceae), Cleistanthus myrianthus (Euphorbiaceae), Endiandra microneura (Lauraceae), Myristica insipida (Myristicaceae), Acmena graveolens (Myrtaceae), Normanbya normanbyi (Arecaceae)) using the unique access provided by the crane. This has allowed the first non-destructive biomass estimate to be carried out for a forest of this type. Allometric equations which relate tree biomass to the measured variable 'diameter at breast height' were developed for the six species, and a general equation was also developed for trees on the plot. The general equation was similar in form to equations developed for tropical rainforests in Brazil and New Guinea. The species equations were applied at the level of families, the generalized equation was applied to the remaining species which allowed the biomass of a total of 680 trees to be calculated. This has provided a current estimate of 270 t ha-1 above-ground biomass at the Australian Canopy Crane site; a value comparable to lowland rainforests in Panama and French Guiana. Using the same tree database seven alternative allometric equations (literature equations for tropical rainforests) were used to calculate the site biomass, the range was large (252-446 t ha-1) with only three equations providing estimates within 34 t ha-1 (12.5%) of the site value. Our use of multiple species-specific allometric equations has provided a site estimate only slightly larger (1%) than that obtained using allometric equations developed specifically for tropical wet rainforests. We have demonstrated that it is possible to non-destructively measure the biomass in a complex forest using an on-site canopy crane. In conjunction the development of crown maps and a detailed tree architecture database allows changes in forest structure to be followed quantitatively. © 2007 Ecological Society of Australia.

Prostituição e morte em Maggie: a girl of the streets: uma leitura feminista sobre a Slum fiction norte-americana de Stephen Crane

Pós-graduação em Letras - FCLAS

Remoção mecânica de plantas aquáticas: análise econômica e operacional

A remoção de plantas aquáticas tem sido utilizada como opção ao controle químico e biológico, em razão de restrições ambientais em algumas regiões brasileiras. O objetivo deste trabalho foi desenvolver um modelo para análise econômica e operacional da remoção mecânica de plantas aquáticas, visando realizar estudo econômico comparativo com o controle químico. A operação foi estudada num reservatório de uma usina de bombeamento em Barra do Piraí-RJ. O sistema consiste de retroescavadeiras instaladas em balsas, usadas para cortar as plantas e liberá-las no fluxo de água. Antes da tomada d'água existe uma barreira flutuante que intercepta as plantas, as quais são removidas por um guindaste fixo nas margens. As plantas são armazenadas por algum tempo e depois descartadas. Existe, ainda, um sistema de limpeza das grades da tomada d'água. Dados do volume total de plantas descartadas foram coletados durante 14 meses, assim como foi avaliado o volume de biomassa produzido por área das principais espécies infestantes. A empreiteira que administra o serviço forneceu planilhas de custos e outro parâmetros operacionais. Um modelo foi desenvolvido para calcular custos por hectare de plantas removidas. Os resultados mostraram custo médio mensal de US$ 17.780,28 por hectare. Apesar do alto custo, o sistema de remoção demonstrou capacidade de controlar apenas 4,1% da área infestada no reservatório, na época da coleta dos dados. Simulando dados de uma aplicação de glyphosate, o controle químico custaria apenas 0,23% do custo da remoção. Análises de sensibilidade mostraram que a compactação das plantas para transporte, o volume de plantas produzidas por área e o custo do transporte são os parâmetros principais para a otimização.

FIRST ZOEAL STAGE and MEGALOPA of UCA (UCA) MARACOANI (DECAPODA: BRACHYURA), WITH COMMENTS on THE LARVAL MORPHOLOGY of SOUTH-AMERICAN SPECIES of OCYPODIDAE

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de uma ferramenta computacional em excel para automatizar o projeto estrutural de pórticos rolantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The red badge of courage: uma análise descritiva de suas traduções no Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Greening the campus of a Brazilian university: cultural challenges

Purpose - This study examined the relationship between environmental management practices developed at a campus of a Brazilian university (University of Sao Paulo) and the greening of its organizational culture. The paper aims to discuss these issues.Design/methodology/approach - This article presents a theoretical background based on the concepts of environmental management, organizational culture and environmental management in higher education institutions. The main framework of this research is the model proposed by Harris and Crane.Findings - The studied university has an environmental management program that is sometimes constrained in the following ways: the university bureaucracy and hierarchy; the main performance indicators for lecturers and professors are based on scientific production and publication, giving them little time for complementary activities; and some units develop their own environmental management practices, but they are not disseminated as best practices for use by other units. Some academic units showcase the proactive actions of professors who incorporate environmental management into their daily activities. The general perception is that the phrase environmental management is almost synonymous with solid waste management.Originality/value - This research details the first Brazilian application of the Harris and Crane model. It contributes an original analysis of environmental management and green organizational culture of a Brazilian university, an organizational type that has seldom been studied to date.

Jogo de papéis e linguagem: diálogos possíveis entre Vigotski e Bakhtin

In this paper we present ongoing research in which we approach the regulatory role of language in role play in children aged six and seven. In research, we seek an understanding of the relationship between language, ownership and complexity of the children's game. The hypothesis guiding the research is that the dialogical relations between children and adults and among children, while playing, contribute to children's learning game. Procedures are being used interpretive ethnographic research that focuses on the human meaning of social relations, waged by the subjects in a particular historical context and its elucidation and exposition by one researcher. This approach allows closer studies of Vygotsky and Bakhtin scholars of language that emphasize the regulatory role of language in human relationships and value the dialogic exchange between researcher and researched; active subjects of the research process. The data were produced by means of observation and interview, in a field diary records, photographs and audio recordings. They are being screened in thematic groups and analyzed using interpretative narration. The participants were two teachers and two classes of the first year of an Elementary school (EMEF) School of Municipal Elementary School Crane, State of Sao Paulo, totaling 45 subjects. Bearing in mind the above assumptions, are presented and analyzed data that allow to anticipate some results.

Estudo de uma ponte rolante comercial no transportede bobina de aço de 12 toneladas

This work aims to determine the stresses acting on the main beam of a crane to transport steel coils of up to twelve tons. To determine the stress it was made a revision of the knowledge of the mechanics of materials to apply the analytical method. Following a review of the finite element method is made to understand the same. To complete the study it was used the commercial software ANSYS to determine the stresses by finite element method, the program provides images that help to better understand the results obtained. With the results a comparison of the values of the tensions between the two methods (analytical and finite element) was made. To assist in the calculations it was used the NBR 8400, 1984 (Calculation of Lifting Equipment Load)

Gestão da Manutenção Centrada na Confiabilidade em Pontes Rolantes

The objective of this work is to perform a study applying the methodology of Reliability Centered Maintenance - MCC to a group of cranes belonging to Amsted -Maxion in Cruzeiro - SP. The work consists of a presentation of maintenance, the reasons why more and more people worry about maintenance, making a presentation on the types of maintenance, its peculiar characteristics and then do a study where you identified the functionality required by the equipment under study, identified failure modes and their probable causes, and then detail the effects and consequences of these failures. With that evaluate the criticality of these failures and identify the most significant consequences that affect safety, availability or cost of equipment operation and allow a selection of the most appropriate tasks for the identified failure modes. We will also present best crane equipment, its main components, verify that there was or not improvement in the machine after the application of MCC and make a current analysis of maintenance in Amsted -Maxion

Análise estática de um guindaste de torre, utilizando o método dos elementos finitos

The finite element method is of great importance for the development and analysis of a new product being designed or already on the market, and that requires some specific request or special application. The tower crane, being an essential equipment for modern construction to increase productivity and safety on construction sites, is required for many types of special applications day after day, in many kinds of work. Paying attention to this growing need for handling special projects for the tower crane, faced with the importance and necessity of development and improvement of knowledge in more accurate and practical calculation methods such as the finite element method , for greater agility and precision in the response to a new project. The tower crane is defined by the maximum load moment that it can act with a certain amount of load. The tower crane which will be analyzed in this work , for example, is a tower crane with a resulting capacity of 85 Metric Tons which are considered basic dimensions data of a fisical tower crane of a crane company Liebherr in Guaratinguetá . Thus, the project analysis will begin with the threedimensional representation of the crane lines with AutoCAD software , conversion of this model to the format accepted ANSYS Workbench and completion of 3D modeling of structural components in Design module ANSYS software. After structural modeling is completed, the simulation is performed in static simulation of ANSYS Workbench software mode. The standards will be adopted to DIN (Deutsches Institut für Normung) and EN 14439 (Europäische Normung 14439) and some NR 's related to specific security class of tower cranes, which will be referred throughout the work

Desenvolvimento de uma ferramenta paramétrica em linguagem APDL para o cálculo da estrutura de um pórtico rolante

Pós-graduação em Engenharia Mecânica - FEG

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1