13 resultados para Geological extrapolation
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
One of the purposes of this study is to give further constraints on the temperature range of the zircon partial annealing zone over a geological time scale using data from borehole zircon samples, which have experienced stable temperatures for ∼1 Ma. In this way, the extrapolation problem is explicitly addressed by fitting the zircon annealing models with geological timescale data. Several empirical model formulations have been proposed to perform these calibrations and have been compared in this work. The basic form proposed for annealing models is the Arrhenius-type model. There are other annealing models, that are based on the same general formulation. These empirical model equations have been preferred due to the great number of phenomena from track formation to chemical etching that are not well understood. However, there are two other models, which try to establish a direct correlation between their parameters and the related phenomena. To compare the response of the different annealing models, thermal indexes, such as closure temperature, total annealing temperature and the partial annealing zone, have been calculated and compared with field evidence. After comparing the different models, it was concluded that the fanning curvilinear models yield the best agreement between predicted index temperatures and field evidence. © 2012 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The zircon mineral is widely studied in geochronology. In the case of the fission track method (FTM), the age is determined by the density of fission tracks at the zircon surface, which can be observed with an optical microscope after an appropriate chemical treatment (etching). The etching must be isotropic at the zircon grain surface to be used in the FTM, which leads those zircon grains whose etching is anisotropic to be discarded. The only reason for this discarding is the nonuniform morphology of the surface grain seen by optical microscopy, that is, no further physicochemical analysis is performed. In this work, combining micro-Raman and scanning electron microscopy (SEM) to study the etching anisotropy, it was shown that zircon grains that present at least one area at the surface where the density of fission track is uniform can be used in the FTM. The micro-Raman showed characteristic spectra of the standard zircon sample either from the areas where there are tracks or from where there are not. The only difference found was in the Raman bandwidths, which were broader for the areas with higher density of fission tracks. This suggests simply a decrease in the relative percentage of the crystalline/amorphous phases at these areas. The SEM/energy dispersive spectrometry (EDX) showed that there were no significant differences in the principal chemical composition at the areas with and without fission tracks. Copyright (c) 2008 John Wiley & Sons, Ltd.
Resumo:
The molar single ion activity coefficient (y(F)) of fluoride ions was determined at 25 degrees C and ionic strengths between 0.100 and 3.00 mol L(-1) NaClO(4) using an ion-selective electrode. The activity coefficient dependency on ionic strength was determined to be Phi(F) = log y(F) = 0.2315I-0.041I(2). The function Phi(F)(I), combined with functions obtained in previous work for copper (Phi(Cu)) and hydrogen (Phi(H)), allowed us to make the estimation of the stoichiometric and thermodynamic protonation constants of some halides and pseudo-halides as well as the formation constants of some pseudo-halides and fluoride 1:1 bivalent cation complexes. The calculation procedure proposed in this paper is consistent with critically-selected experimental data. It was demonstrated that it is possible to use Phi(F)(I) for predicting the thermodynamic equilibrium parameters independently of Pearson's hardness of acids and bases.
Resumo:
On the basis of geologic, petrologic, and U-Pb geochronologic data the basement rocks in the east-central part of the Rondonia Tin Province (RTP, southwestern Amazonian craton) are grouped into five lithologic associations: (1) tonalitic gneiss (1.75 Ga); (2) enderbitic granulite (1.73 Ga); (3) paragneiss; (4) granitic and charnockitic augen gneisses (1.57-1.53 Ga); and (5) fine-grained granitic gneiss and charnockitic granulite (1.43-1.42 Ga). The first three are related to development of the Paleoproterozoic Rio Negro-Juruena Province and represent the oldest crust in the region. The tonalitic gneisses and enderbitic granulites show calc-alkaline affinities and Nd isotopic compositions (initial epsilon(Nd) = +0-1 to -1.5; T-DM of 2.2-2.1 Ga) that suggest a continental arc margin setting for the original magmas. The paragneisses yield T-DM values of 2.2-2.1 Ga suggesting that source material was primarily derived from the Ventuari-Tapajos and Rio Negro-Juruena crusts, but detrital zircon ages and an intrusive granitoid bracket deposition between 1.67 and 1.57 Ga. The granitic and charnockitic augen gneisses show predominantly A-type and within-plate granite affinities, but also some volcanic arc granite characteristics. The initial epsilon(Nd) values (+0.6 to +2.0) indicate mixing of magmas derived from depleted mantle and older crustal sources. These rocks are correlated to the 1.60-1.53 Ga Serra da Providencia intrusive suite that reflects inboard magmatism coeval with the Cachoeirinha orogen located to the southeast. The fine-grained granitic gneiss and charnockitic granulites represent the first record of widespread magmatism at 1.43-1.42 Ga in northern Rondonia. Their geochemical signatures and the slightly positive initial epsilon(Nd) values (+0.7 to +1.2) are very similar to those of the most evolved granites of the calc-alkaline Santa Helena batholith farther southeast. U-Pb monazite and Sm-Nd whole-rock-garnet ages demonstrate that a high-grade tectonometa-morphic episode occurred in this region at 1.33-1.30 Ga. This episode attained upper-amphibolite conditions and is interpreted as the peak of the Rondonian-San Ignacio orogeny. The U-Pb and Sm-Nd data presented here and data published on rapakivi granites elsewhere indicate that the east-central part of the RTP is a poly-orogenic region characterized by successive episodes of magmatism, metamorphism, and deformation between 1.75 and 0.97 Ga. (C) 2002 Elsevier B.V. B.V. All rights reserved.
Resumo:
Reinterprets petrologic studies and their geologic significance in the light of recent literature on the calcretes in the world, and the recent revision of Bauru Group stratigraphy.-from English summary
Resumo:
The Triassic fish faunas of the Southern Hemisphere are only known from a few sedimentary basins and the most productive sites are those from the Karoo Supergroup, in South Africa and the Sydney Basin of Australia. A single lungfish tooth plate ascribed to Ptychoceratodus cf. philippsi was recovered from Late Triassic (Carnian) red beds of southern Brazil and is described herein. This find extends to South America the palaeogeographic distribution of the genus, which occurs in the Early Triassic of Australia and South Africa and the Middle/Late Triassic of Europe and Late Triassic of Madagascar and India. The presence of this dipnoan solely in the uppermost part of the Santa Maria Formation suggests that the migration of Ptychoceratodus towards the Paraná Basin began not before the late Induan/early Olenekian (late Early Triassic). At that time, more humid (monsoonal) conditions prevailed in what is now southern Brazil, compared to semi-arid/desert conditions that dominated the Late Permian and possibly the earliest Early Triassic (the latter presumably not represented in the Paraná Basin). © The Geological Society of London 2008.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.
Resumo:
This paper aimed to give a contribution to improve water resources management, consists of the analysis of interaction among groundwater and streamflow, by through the analysis of the relationship between basic and total streamflow, based on measured hidrological data from Ribeirão Boa Vista or Córrego Lajeado. watershed. Comparisons among groundwaterflow in this basin with another one in Rio Corumbataí basin were made based on the specific basic flow, in order to verify the possibility of the utilization of measured hydrological data in other basins with similar geological characteristics and soil use and occupation. Based upon the comparisons that were made, specific basic flow does not represent a good tool for extrapolation of measured data, indicating that this comparison shall be weighted by others characteristics as permeability and thickness of geological formations. Finally, it was possible to conclude that basic flow may be considered as an additional parameter for analysis of hydrological and hydrogeological characteristics of a basin and to provide subsidies to release legal licenses for water resources uses. related to surface water as well as for groundwater and may also be used as a tool for consolidation of integrated management of water resources, that is considered as a necessary and essential practice to avoid conflicts between users of water resources in a river basin.
Resumo:
This manuscript aims proposing a methodology for correlating soil porosity to the respective geological units using geostatistical analysis techniques, including interpolation data by kriging. The site studied was in Lorena municipality, Paraíba do Sul Valley, southeastern Brazil. Specifically all studies were carried out within an area of 12 km2 located at Santa Edwirges farm. The database comprehended 41 soil samples taken at different geological and geomorphologic units at three different depths: surface, 50 cm and 100 cm depth. The geostatistical analyses results were correlated to a geological mapping specifically elaborated for the site. This mapping accounts for two different geological formations and a geological contact characterized by a shearing zone. The results indicate the existence of a significant relationship between the soil porosity and the respective geological units. The studies revealed that the residual soils from weathered granitic rocks tend to have higher porosities than the residual soils from weathered biotite gneiss rocks, while the soil porosity within the shearing zone is relatively un-sensitive to the respective geological formation. The spatial patterns observed were efficient to evaluate the relationship between the soil porosity, geology unit and the and geomorphology showing a good potential for correlating with others soil properties such as hydraulic conductivity, soil water retention curves and erosion potentials.