Performance and ruminal morphologic characteristics of Saanen kids fed ground, pelleted or extruded total ration

The aim of the present study was to determine feed intake and average weight gain and to evaluate the ruminal morphologic characteristics of Saanen kids slaughtered at 30, 45 and 60 days of age, according to a completely randomized design. Thirty-six non-castrated male Saanen kids were fed ground total ration, pelleted total ration, or extruded total ration. Feed intake and refusals were controlled daily and the animals were weighed at birth and then once a week. Newborn kids received a milk replacer and were weaned at 45 days. Immediately after slaughter, the animals were eviscerated, the entire digestive apparatus was removed from the carcass. The reticulo-rumen was separated, emptied, washed and weighed. Samples were collected from the dorsal sac, pillar area and ventral sac of the rumen, fixed for about 24h in Bouin's solution, dehydrated, embedded in Histosec and cut into 5 mu m sections. Results showed that dry matter intake (DMI) at weaning and post-weaning and weight gain were higher (P < 0.05) in animals that received the pelleted total ration. The weight of the reticulo-rumen accompanied body development and was heavier in these animals. Histologically, after weaning ruminal papillae were more developed in animals that received pelleted total ration. Length of papillae increased with increase of age. The ratio of papillary height to papillary width increased with age in the ventral sac and until weaning (P > 0.05). We conclude that the pelleting process of the total ration favored increased intake, with a 46.7% increase in weight gain and increase in rumen weight and papillae length, suggesting that best results are obtained with this processing. In general, no difference was observed between the results obtained with extruded and ground total ration, although animals fed extruded total ration showed an increase in rumen weight and papillae width. (c) 2004 Elsevier B.V All rights reserved.

Performance of four tomato cultivars, with and without ground cover

The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.

Analysis of forecasting capabilities of ground surfaces valuation using artificial neural networks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigation on Surface Finishing of Components Ground with Lapping Kinematics: Lapgrinding Process

Over the last three decades, researchers have responded to the demands of industry to manufacture mechanical components with geometrical tolerance, dimensional tolerance, and surface finishing in nanometer levels. The new lapgrinding process developed in Brazil utilizes lapping kinematics and a flat grinding wheel dressed with a single-point diamond dresser in agreement with overlap factor (U(d)) theory. In the present work, the influences of different U(d) values on dressing (U(d) = 1, 3 e 5) and grain size of the grinding wheel made of silicon carbide (SiC = 800, 600 e 300 mesh) are analyzed on surface finishing of stainless steel AISI 420 flat workpieces submitted to the lapgrinding process. The best results, obtained after 10 minutes of machining, were: average surface roughness (Ra) 1.92 nm; 1.19 mu m flatness deviation of 25.4 mm diameter workpieces and mirrored surface finishing. Given the surface quality achieved, the lapgrinding process can be included among the ultra-precision finishing processes and, depending on the application, the steps of lapping followed by polishing can be replaced by the proposed abrasive process.

Waveshapes of continuing currents and properties of M-components in natural positive cloud-to-ground lightning

This work analyses the waveshapes of continuing currents and parameters of M-components in positive cloud-to-ground (CG) flashes through high-speed GPS synchronized videos. The dataset is composed of only long continuing currents (with duration longer than 40 ms) and was selected from more than 800 flashes recorded in Sao Jose dos Campos (45.864 degrees W, 23.215 degrees S) and Uruguaiana (29.806 degrees W, 57.005 degrees S) in Southeast and South of Brazil, respectively, during 2003 to 2007 summers. The videos are compared with data obtained by the Brazilian Lightning Location System (BrasilDAT) in order to determine the polarity of each flash and select only positive cases. There are only two studies of waveshapes of continuing currents in the literature. One is based on direct current measurements of triggered lightning, in which four different types of waveshapes were observed; and the other is based on measurements of luminosity variations in high-speed videos of CG negative lightning, in which besides the four types above mentioned two additional types were observed. The present work is an extension of the latter, using the same method but now applied to obtain the waveshapes of positive CG lightning. As far as the authors know, this is the first report on M-components in positive continuing currents. We also have used the luminosity-versus-time graphs to observe their occurrence and measure some parameters (duration, elapsed time and time between two successive M-components), whose statistics are presented and compared in detail to the data for negative flashes. We have plotted a histogram of the M-components elapsed time over the total duration of the continuing current for positive flashes, which presented an exponential decay (correlation coefficient: 0.83), similar to what has been observed for negative flashes. (C) 2008 Elsevier B.V. All rights reserved.

Ground annatto seeds (Bixa orellana L.) in sorghum-based commercial layer diets and their effects on performance, egg quality, and yolk pigmentation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Serum progesterone concentration and conception rate of beef cows supplemented with ground corn after a fixed-time artificial insemination protocol

Avaliaram-se os efeitos de diferentes níveis de ingestão de suplemento com milho moído finamente (MF) em vacas de corte, mantidas em pasto, após inseminação artificial em tempo fixo (IATF), sobre a concentração sérica de progesterona (P4) no dia 7, e sobre a concepção no dia 28 pós IATF. Trezentas e sessenta e quatro vacas Brangus, multíparas lactantes, tiveram as atividades folicular e luteal sincronizadas por tratamento com benzoato de estradiol (Estrogin; 2,0mg IM) e inserção de dispositivo intravaginal de P4 (CIDR) no dia -11, seguido por tratamento com PGF2 α (Lutalyse; 25mg IM) no dia - 4, retirada do CIDR e remoção temporária de bezerros no dia -2, e tratamento com GnRH (Fertagyl; 100 µ g IM), IATF e retorno dos bezerros no dia 0. No dia 0, as vacas foram aleatoriamente distribuídas para receber um dos quatro tratamentos: G1 -2kg/dia de MF do dia 0 ao dia 21; G2 -2kg/dia de MF do dia 0 ao dia 7, e 6kg/dia de MF do dia 8 ao dia 21; G3 -6kg/dia de MF do dia 0 ao dia 7, e 2kg/dia de MF do dia 8 ao dia 21; G4 -6kg/dia de MF do dia 0 ao dia 21. Amostras de sangue foram colhidas no dia 7, e o diagnóstico de gestação foi realizado por ultrassonografia no dia 28. As vacas suplementadas com 2kg/dia de MF apresentaram maior concentração sérica de P4 no dia 7 em relação às vacas suplementadas com 6kg/dia (1,58 vs. 1,28ng/mL; P<0,01, EPM=0,08). As vacas do G4 apresentaram maior taxa de concepção em relação às vacas do G1 (58,4 vs. 41,9%, respectivamente; P<0,05). O nível de consumo do suplemento energético após a IATF é negativamente associado às concentrações séricas de P4, porém positivamente associado à taxa de concepção em vacas de corte em pasto.

The influence of temperature of three adhesive systems on bonding to ground enamel

This study evaluated the microtensile bond strength test (mu T), micromorphology of resin-enamel interface (RET) and etching patterns (EP) promoted by the etch-and-rinse adhesive, Prime&Bond NT (PB), and two self-etching adhesives, Clearfil SE Bond (SE) and Adper Prompt L-Pop (APR), to ground bovine enamel surfaces' when applied at temperatures of 5 degrees C (C), 40 degrees C (H) and 20 degrees C (R). Materials and Methods. Sixty-three bovine incisors were randomly divided into nine experimental groups (n=7) according to adhesive systems and temperatures. The buccal enamel surfaces were flattened with 600-grit SiC paper and abraded with a diamond bur under water-cooling. The adhesive systems were applied according to the manufacturer's instructions. After the restorative procedures, the specimens were sectioned into five slabs. Four slabs were prepared for mu T and one for interface analysis. For etching pattern analysis, the remaining 16 bovine enamel fragments were used (n=2). The adhesives were applied and the surfaces were rinsed with organic solvents after application. The specimens for RET and EP analysis were prepared for SEM analysis. Results. No significant differences among the adhesives were found at R temperature. However, at 5 degrees C, PB and APR presented lower bond strength than SE. At H temperature, higher bond strength was observed for PB than for APR and SE. At C and H temperature, formation of the interdiffusion zone was impaired and the treated enamel surfaces presented an undefined EP.

Similarity of ground-dwelling anuran (Amphibia) composition among different vegetation physiognomies in a Mesophytic Semideciduous Forest from southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Podzolization as a deferralitization process: dynamics and chemistry of ground and surface waters in an Acrisol-Podzol sequence of the upper Amazon Basin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ground state masses and binding energies of the nucleon, hyperon and heavy baryons in a light-front model

The ground state masses and binding energies of the nucleon, lambda0, lambdac+ , lambdab0 are studied within a constituent quark QCD-inspired light-front model. The light-front Faddeev equations for the Qqq composite spin 1/2 baryons, are derived and solved numerically. The experimental data for the masses are qualitatively described by a flavor independent effective interaction.

Behavior of overhead transmission line parameters on the presence of ground-wires

Initially this paper shows the ground wire reduction process for generic multiphase transmission lines and after, the ground wire reduction process for a specilic 440-kV three-phase overhead transmission line. Following this, the influence of the ground wire reduction process considering two situations is shown: first, considering frequency independence and second, when these parameters are considered as frequency dependent. This paper presents analytical results for generic multiphase transmission lines. For a specific 440-kV three-phase overhead transmission line, analytical and graphic results are shown considering real data for every frequency between 10 Hz and 1 MHz.

GROUND-STATE-ENERGY OF SINGULAR POTENTIALS

It is shown that for singular potentials of the form lambda/r(alpha),the asymptotic form of the wave function both at r --> infinity and r --> 0 plays an important role. Using a wave function having the correct asymptotic behavior for the potential lambda/r(4), it is, shown that it gives the exact ground-state energy for this potential when lambda --> 0, as given earlier by Harrell [Ann. Phys. (NY) 105, 379 (1977)]. For other values of the coupling parameter X, a trial basis;set of wave functions which also satisfy the correct boundary conditions at r --> infinity and r --> 0 are used to find the ground-state energy of the singular potential lambda/r(4) It is shown that the obtained eigenvalues are in excellent agreement with their exact ones for a very large range of lambda values.