Evaluation by Free Vibration Method of Moisture Absorption Effects in Polyamide/Carbon Fiber Laminates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Damping behavior of continuous fiber/metal composite materials by the free vibration method

Fiber metal laminates (FML) offer significant improvements over current available materials for aircraft structures due to their excellent mechanical characteristics and relatively low density. Non-destructive testing techniques are being used in the characterization of composite materials. Among these, vibration testing is one of the most used tools because it allows the determination of the mechanical properties. In this work, the viscoelastic properties such as elastic (E') and viscous (E) responses were obtained for aluminum 2024 alloy; carbon fiber/epoxy; glass fiber/epoxy and their hybrids aluminum 2024 alloy/carbon fiber/epoxy and aluminum 2024 alloy/glass fiber/epoxy composites. The experimental results were compared to calculated E modulus values by using the composite micromechanics approach. For all specimens studied, the experimental values showed good agreement with the theoretical values. The damping behavior, i.e. The storage modulus and the loss factor, from the aluminum 2024 alloy and fiber epoxy composites can be used to estimate the viscoelastic response of the hybrid FML. (c) 2005 Elsevier Ltd. All rights reserved.

A Comparison of the Effects of Nonlinear Damping on the Free Vibration of a Single-Degree-of-Freedom System

This article concerns the free vibration of a single-degree-of-freedom (SDOF) system with three types of nonlinear damping. One system considered is where the spring and the damper are connected to the mass so that they are orthogonal, and the vibration is in the direction of the spring. It is shown that, provided the displacement is small, this system behaves in a similar way to the conventional SDOF system with cubic damping, in which the spring and the damper are connected so they act in the same direction. For completeness, these systems are compared with a conventional SDOF system with quadratic damping. By transforming all the equations of motion of the systems so that the damping force is proportional to the product of a displacement dependent term and velocity, then all the systems can be directly compared. It is seen that the system with cubic damping is worse than that with quadratic damping for the attenuation of free vibration. [DOI: 10.1115/1.4005010]

On the undamped free vibration of a mass interacting with a Hertzian contact stiffness

Three methods are used to determine the natural frequency of undamped free vibration of a mass interacting with a Hertzian contact stiffness. The exact value is determined using the first integral of motion. The harmonic balance method is used on a transformed equation for an approximate solution, and the multiple scales method is used on an approximate equation. The maximum initial displacement avoiding contact loss is also determined, and the corresponding exact natural frequency is also obtained analytically. The methods are evaluated by studying the free vibration of an elastic sphere on a flat rigid surface. © 2011 Elsevier Ltd © 2011 Elsevier Ltd. All rights reserved.

Efeito do condicionamento ambiental nas propriedades de cisalhamento e viscoelásticas de compósitos híbridos metal-fibra

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de compósitos de fibras de carbono/PEKK com aplicações aeronaúticas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analytical study of the nonlinear behavior of a shape memory oscillator: Part I-primary resonance and free response at low temperatures

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of anaerobic power of swimmers: the correlation of laboratory tests on an arm ergometer with field tests in a swimming fool

The aim of this study was to verify the correlation between the Wingate arm crank test outputs (peak power, mean power, and fatigue index), obtained on a specific ergometer, and the performance in crawl stroke swim sprints of 14, 25, 50, and 400 m. The experiment was conducted with 9 healthy male volunteers (18.1 +/- 2.2 years of age; 172 +/- 0.04 cm; 67.7 +/- 5.92 kg and 15.7 +/- 4.57% body fat). on determined days, all individuals were submitted to the Wingate arm crank test and crawl freestyle sprints of 14, 25, 50, and 400 m as they were timed with a stopwatch. The peak power, the mean power, and the fatigue index, which were obtained during the Wingate arm crank test, were not significantly correlated with the maximum swim velocities during the crawl free-style tests of 14 (r = 0.40; r = 0.64; r = 0.11), 25 (r = 0.28; r = 0.39; r = -0.27), 50 (r = 0.03; r = 0.09; r = -0.31), and 400 (r = -0.52; r = -0.37; r = -0.65) m respectively. Thus, it is possible to conclude that the Wingate arm crank test is not suitable to assess the anaerobic power of swimmers under the described experimental conditions.

Efeito do oxigênio nas propriedades anelásticas e biocompatibilidade das ligas de Ti-8%pTa e Ti-16%pTa utilizadas como biomaterial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of fiber orientation on the shear behavior of glass fiber/epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de genótipos de batata (Solanum spp.) a Diabrotica speciosa (Germar, 1824) (Coleoptera: Chrysomelidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência e mecanismos envolvidos em genótipos de milho em relação ao ataque do gorgulho, Sitophilus zeamais Mots. (Coleoptera: Curculionidae)

A resistência de 30 genótipos de milho ao ataque de Sitophilus zeamais Mots. foi avaliada em teste sem chance de escolha, sendo efetuada uma seleção de 10 deles (M 9560, XHT 12, A 952, AG 5011, X 9557, Z 8452, C 615, C 435, DINA 888, C 606), os quais foram submetidos ao teste com chance de escolha, avaliando-se a atratividade e a preferência para oviposição. Pelos resultados concluiu-se que os genótipos menos atrativos foram Z 8452 (3,1%) e M 9560 (3,2%), enquanto o mais atrativo foi C 615 (24,7%). Os genótipos que apresentaram resistência do tipo não-preferência para oviposição foram A 952, M 9560 e XHT 12 com números médios de 2,0; 3,0 e 3,4 ovos por recipiente. A resistência do tipo não-preferência para alimentação e/ou antibiose foi observada nos genótipos M 9560, A 952 e Z 8452. Os genótipos com alta suscetibilidade ao gorgulho foram C 435, C 444, C 606 e AG 8010.

Resistência de genótipos de milho ao ataque de Sitophilus zeamais Mots. (Coleoptera: Curculionidae)

Avaliação da resistência de genótipos de milho ao ataque de Sitophilus zeamais Mots., em condições de laboratório, em testes com e sem chance de escolha, indicaram que os genótipos menos atrativos ao inseto foram C-701 e C-505 (8,5% e 10,43% dos insetos liberados), enquanto que C-525 e C-606 (33,25% e 21,72%) foram os mais atrativos. Os genótipos C-511, C-505, C-525 e C-125 proporcionaram a emergência de menor número de insetos e de peso de grãos consumidos (5,0 insetos e 0,1g; 8,1 e 0,1; 8,5 e 0,2; 9,9 e 0,2), quando comparados ao C-606, C-805, C-701 e C-135 com maiores valores (24,2 insetos e 0,6g; 18,6 e 0,5; 20,4 e 0,5; 20,1 e 0,5 respectivamente).

Resistência de variedades de algodão ao curuquerê do algodoeiro Alabama argillacea Hubner (lepidoptera: noctuidae)

Este trabalho teve como objetivo verificar a ocorrência das formas de resistência, tais como: a não preferência para oviposição, a não preferência para alimentação e a antibiose, em variedades de algodoeiro (Gossypium hirsutum L.), à Alabama argillacea (Hubner, 1818), em experimentos de laboratório (27 ± 2 ºC, 70 ± 10% de U.R. e fotofase de 14 horas). Para avaliar a não preferência para oviposição e para a alimentação em teste com chance de escolha, adotou-se o delineamento em blocos casualizados e, no teste sem chance, o inteiramente casualizado. Para avaliar a antibiose, foram fornecidas às larvas, diariamente, folhas das variedades DeltaOpal, NuOpal, FMT 701, FMX 910 e 20 FMX 996. Durante este processo, verificou-se a duração de cada fase do inseto, avaliando-se a massa de larvas aos dez dias de idade, massa de pupas com 24 horas, período larval, pré-pupal e pupal, longevidade de adultos, viabilidade total e fecundidade. As variedades NuOpal e FMT 701 apresentam resistência do tipo não preferência para alimentação. As variedades NuOpal, FMT 701 e FMX 910 apresentam resistência do tipo antibiose em relação a A. argillacea.

Fatores que afetam a oviposição de Bemisia tabaci (genn.) biótipo B (Hemiptera: Aleyrodidae) em feijoeiro

The objective of this work was to evaluate the oviposition behavior of the whitefly Bemisia tabaci (Genn.) biotype B in relation to plant age, adult density and plant region on common beans plants. The genotype Perola was used to do the test. In free-choice tests 20, 30 and 40 day-old plants were used where evaluated the oviposition preference of the insect. In no-choice test, 30 day-old plants were used to evaluate densities of 50, 100 and 150 adults per plants. No-choice test for plant position (apex, median, base) 40 day-old plants were adopted for liberation of adults. The 30 and 40 day-old plants were preferred for oviposition, the densities of 100 adults per plants ensured the number of eggs enough to discriminate common beans genotypes with different whitefly resistance degrees, and apical region of plant were preferred for whitefly egg laying and therefore more suitable for egg sampling in common bean plants.