The sugar cane vegetal residues unloaded in the sugar mill: Operational costs and physical characteristics

Brazil produced in 2002/03 season 317.87×106tons of sugar cane stalks and 36.88×106tons of vegetal residues (green leaves, dry leaves and tops) in a planted area of 4.61×106 hectares (ha). These residues have a useful heat of 3,613.14Mcal.t-1. Currently most of this biomass is burned as a pre-harvest practice. The doubt persists in the system type that it must be adopted to pick up, load, transport and unload this biomass at the sugar mill boilers. This study analyzed 22 variables related to operational costs and physical characteristics of these residues in a field situation using a JOHN DEERE® 6850 forage harvester with two different treatments: T1 and T2 (two types of rakes) with 6 repetitions each one. The geographic location of the studied area that belongs to COSTA PINTO MILL (COSAN® Group) is: Latitude 22°40'30S and Longitude 47°36'38W. The adopted methodology was proposed by Ripoli et al. (2002). The obtained results at a 5% level of significance showed that both treatments did not differed significantly between them. Some of the results were, where EBP stands for Oil Equivalent Barrel: Windrowing (T1=US$0.17.EBP-1 and US$9.59.ha-1, T2=US$0.08.EBP-1 and US$4.27.ha-1); Pick up (T1=US$1.31.EBP-1 and US$44.29.ha-1, T2 =US$1.37.EBP-1 and US$48.36.ha-1); Transportation (T1=US$1.27.EBP-1 and US$14,30.ha -1, T2=US$1.33.EBP-1 and US$14,80.ha -1), Unloading at the sugar mill (T1=US$0.30.EBP-1 and US$3.39.ha-1, T2=US$0.32.EBP-1 and US$3.51.ha-1); Total (T1=US$3.05.EBP-1 and US$71.57.ha-1, T2=US$3.10.EBP-1 and US$70.94.ha-1). Confronting the obtained data with the ones in the bibliography, this system revealed itself more expensive than the baling system or the integral harvest system using combines.

Milho para silagem: semeadura e colheita em Latossolo sob preparo convencional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Demanda energética na colheita, degradabilidade e digestibilidade da silagem de híbridos de milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Demanda energética na colheita de híbridos de milho para silagem em função do estádio de maturidade e tamanho de partícula

Corn is the crop most used for making silage. The efficiency of the process should also be evaluated by cost per kg of dry matter harvested (kgDM). The objective of this study was to evaluate energy consumption in the harvest of corn hybrids for silage depending on the texture of the hybrid, four and three harvest maturities of particle sizes - Tp was used a tractor Massey Ferguson MF 610 model 86 cv. Cutting and harvesting the forage harvester is used model JF92 Z10. To obtain data on fuel consumption (CC) and time spent for each plot, we used a flow meter, installed near the fuel filter of the tractor. The experimental design was completely randomized in a split plot. The interaction between factors triple stage hybrid * Harvest * Tp. The velocity and displacement of the tractor were different for the maturities for hybrid hard texture. The CC schedule for hybrid dent increased harvest maturity earlier and at lower Tp. Consumption was lower by kgDM later maturity, hard texture and bite respectively. The theoretical power was higher in earlier maturity and yield were higher for hybrid hard texture in the most advanced. The CC was lower in late maturity and the hybrid hard texture can be used for silage in relation to the Cc and income in later maturity in higher Tp.

Desempenho operacional de colhedora de forragem com diferentes tamanhos de partículas com e sem o uso do processador

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Nitrogen and carbohydrate fractions on Tifton-85 pastures overseeded with annual winter and summer forage species in different seasons

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural characteristics and forage mass of Tifton 85 pastures managed under three post-grazing residual leaf areas

The experiment was carried out on Cynodon spp cv. Tifton 85 pastures grazed by sheep under rotational stocking, with the objective of evaluating the structural characteristics as well as the forage mass of the pastures subjected to three grazing intensities in successive cycles. Treatments were composed of three residual leaf area indices (rLAI; 2.4; 1.6 and 0.8), allocated in completely randomized blocks with seven replications, totaling 21 experimental units. Tiller population density, pasture height, leaf area index, forage morphological composition and pasture forage mass were evaluated. The rLAI modified the tiller population density, which increased linearly with decrease in the rLAI of the pastures. Dry masses of leaf blade, stem and dead material were inferior when the rLAI imposed were lower, which resulted in differentiated forage production among the treatments. Tifton 85 pastures grazed by sheep in rotational stocking under tropical conditions with different rLAI show a modified sward structure over successive grazing cycles, mainly by alteration in the height and LAI of the plants at pre-grazing and by light interception post-grazing, which change the tiller population density. The residual leaf area index of 1.6 is the most suitable for pasture management for being equivalent to the heights of entrance and exit of animals on and from paddocks of 33 and 19 cm, respectively, which avoid great accumulation of dead material and excessive stem elongation, in addition to ensuring tillering in the sward.

Characteristics of forage and feeding behavior of Nellore heifers fed hydrolyzed sugarcane

The objective of this study was to evaluate the chemical characteristics of the forage and ingestive behavior of Nellore heifers fed hydrolyzed sugarcane in different periods of storage. Twenty-four heifers with initial body weight of 119.6±8.1 kg were utilized. The experimental design was completely randomized, in which the treatments were diets with fresh sugarcane and hydrolyzed sugarcane (5 g of lime kg-1 of chopped sugarcane) stored for 24, 48 or 72 hours as the only roughage. The addition of lime to sugarcane associated with its storage up to 72 hours provided an increase of 20% of the potentially degradable cell wall of carbohydrates, from 382.4 to 458.8 g kg-1 of total carbohydrates. The in vitro digestibility of dry matter was altered by the storage of hydrolyzed sugarcane, increasing 7.08% when the storage time was increased from 24 to 72 hours. Heifers fed fresh sugarcane remained more time consuming compared with heifers fed other diets. The time used for water intake was not influenced by the diet. The rumination time presented a quadratic variation in relation to storage time of the hydrolyzed sugarcane, with higher values for the of hydrolyzed sugarcane diets stored for 48 hours. Heifers fed hydrolyzed sugarcane spent more time on other activities than those fed fresh sugarcane. The supply of hydrolyzed sugarcane stored up to 72 hours in the proportion of 600 g kg-1 of dry matter in the diet, alters the intake patterns, reducing the feed intake in Nellore heifers.

Nitrogen and carbohydrate fractions in exclusive Tifton 85 and in pasture oversown with annual winter forage species

O experimento foi conduzido na FCAV - Campus de Jaboticabal, no período de inverno-primavera-verão de 2001-2002, com o objetivo de determinar o fracionamento de compostos nitrogenados e de carboidratos do Tifton 85 (Cynodon nlemfuensis Vanderyst x Cynodon dactylon (L.) Pers), exclusivo ou sobressemeado com forrageiras anuais de inverno. Os tratamentos testados foram: aveia preta (Avena strigosa Schreb); aveia amarela (Avena byzantina C. Koch); triticale (X Triticosecale Wittmack); aveia preta + aveia amarela; aveia preta + triticale; aveia amarela + triticale; aveia preta + aveia amarela + triticale, sobressemeados sobre Tifton 85 e, sem consorciação (testemunha). O delineamento experimental utilizado foi o de blocos completos ao acaso, com três repetições. O corte das forrageiras foi realizado a 20 cm de altura (presença de forrageiras de inverno) e 10 cm de altura (ausência das forrageiras de inverno). Foram determinados os teores de proteína bruta, carboidratos totais, e o fracionamento dos compostos nitrogenados e de carboidratos. Houve redução nos teores dos compostos químicos das espécies de forrageiras de inverno e no Tifton 85 ao longo dos períodos de avaliações. Os conteúdos de compostos nitrogenados e de carboidratos apresentaram grande variação durante os períodos avaliados, relacionando com as características morfológicas das espécies de gramineas e com a composição botânica das pastagens.

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional

A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.

Influência do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m(3)sc, with a mean of operating cost of US$ 78.78 per work hour.

Effects of row spacing and intercrop on maize grain yield and forage production of palisade grass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação técnica e econômica da colheita de florestas de eucalipto com harvester

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

Spatial variability of forage yield and soil physical attributes of a Brachiaria decumbens pasture in the Brazilian Cerrado

The objective of this study was to analyze variability, linear and spatial correlations of forage dry mass yield (FDM) and dry matter percentage (DM%) of Brachiaria decumbens with the bulk density (BD), gravimetric (GM) and volumetric (VM) moisture, mechanical resistance to penetration (RP) and organic matter content (OM), at depths 1 (0-0.10 m) and 2 (0.10-0.20 m), in a Red Latosol (Oxisol), in order to select an indicator of soil physical quality and identify possible causes of pasture degradation. The geostatistical grid was installed to collect soil and plant data, with 121 sampling points, over an area of 2.56 ha. The linear correlation between FDM × DM% and FDM × BD2 was low, but highly significant. Spatial correlations varied inversely and positively, respectively. Except for DM% and BD, at both depths, the other attributes showed average to high variability, indicating a heterogeneous environment. Thus, geostatistics emerges as an important tool in understanding the interactions in pasture ecosystems, in order to minimize possible causes of degradation and indicate better alternatives for soil-plant-animal management. The decrease in FDM and increased BD1 are indicators of physical degradation (compaction) of Red Latosol (Oxisol), particularly in the places with the highest concentration of animals and excessive trampling, in Cerrado conditions, in the municipality of Selvíria, Mato Grosso do Sul State, Brazil.

Morphological characterization and reproductive aspects in genetic variability studies of forage peanut

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)