Boas práticas de fabricação (bpf), análise de tomate e água em restaurantes da cidade de Botucatu-SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Production and partial characterization of keratinase produced by a microorganism isolated from poultry processing plant wastewater

A Streptomyces was isolated from poultry plant wastewater, showed high keratinolytic activity when cultured on feather meal medium. Optimum keratinolytic activity was observed at 40°C and pH 8.0. The enzyme also showed to be stable between 40 and 60°C. The keratinolytic activity was not inhibited by EDTA, DMSO and Tween 80. On the other hand, CaCl2, ZnCl2, and BaCl2 slightly inhibited the keratinolytic activity. The Streptomyces isolated might be useful in leather, keratin waste treatment, animal feeding industry, and also cosmetic industry. © 2008 Academic Journals.

Determination of 2-methylimidazole and 4-methylimidazole in caramel colors by capillary electrophoresis

The use of chemical preservative compounds is common in the food products industry. Caramel color is the most usual additive used in beverages, desserts, and breads worldwide. During its fabrication process, 2- and 4-methylimidazole (MeI), highly carcinogenic compounds, are generated. In these cases, the development of reliable analytical methods for the monitoring of undesirable compounds is necessary. The primary procedure for the analysis of 2- and 4-MeI is using LC- or GC-MS techniques. These procedures are time-consuming and require large amounts of organic solvents and several pretreatment steps. This prevents the routine use of this procedure. This paper describes a rapid, efficient, and simple method using capillary electrophoresis (CE) for the separation and determination of 2- and 4-MeI in caramel colors. The analyses were performed using a 75 μm i.d. uncoated fused-silica capillary with an effective length of 40 cm and a running electrolyte consisting of 160 mmol L-1 phosphate plus 30% acetonitrile. The pH was adjusted to 2.5 with triethylamine. The analytes were separated within 6 min at a voltage of 20 kV. Method validation revealed good repeatability of both migration time (<0.8% RSD) and peak area (<2% RSD). Analytical curves for 2- and 4-MeI were linear in the 0.4-40 mg L-1 concentration interval. Detection limits were 0.16 mg L-1 for 4-MeI and 0.22 mg L-1 for 2-MeI. The extraction recoveries were satisfactory. The developed method showed many advantages when compared to the previously used method. © 2013 American Chemical Society.

Uma teia do saber: linguagens contemporâneas e tecnológicas na arte-educação

Pós-graduação em Artes - IA

Caracterização de alguns fatores biológicos, sociais, assistênciais e ocupacionais de gestantes e sua associação com o peso e crescimento de crianças nos primeiros meses de vida em Botucatu, 1997/1998

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização higiênico-sanitária de restaurantes comerciais do município de Botucatu-São Paulo

Pós-graduação em Medicina Veterinária - FMVZ

Greening the work force in Brazilian hotels: The role of environmental training

BACKGROUND: Organizations are increasingly required to reduce their environmental impact through the adoption of environmental management, which requires the support of human resource practices.OBJECTIVE: The objective of this study is to determine whether human resource management practices, especially training, are supporting environmental management practices at four hotels located in Brazil.METHODS: This research is qualitative, based on the analysis of four hotels in Brazil.RESULTS: Based on the systematized empirical evidence collected from four hotels (Hotels A, B, C, and D), it can be concluded that: (1) human resource management is still not fully aligned with environmental objectives at the hotels studied; (2) only Hotel B has implemented environmental management practices and aligned with human resource management in a more developed manner, which may indicate that these two variables of analysis could have interrelations; (3) environmental training as a human resource management practice was verified in all hotels analyzed.CONCLUSIONS: The greening of human resources practices is not fully aligned with environmental objectives in the hotels studied. If these hotels really wish to "go green," environmental training will be necessary. Hotel stakeholders play a major role in implementing the greening of the hotel industry.

Biosurfactants in food industry

The increasing environmental concern about chemical surfactants triggers attention to microbial-derived surface-active compounds essentially due to their low toxicity and biodegradable nature. At present, biosurfactants are predominantly used in remediation of pollutants; however, they show potential applications in many sectors of food industry. Associated with emulsion forming and stabilization, antiadhesive and antimicrobial activities are some properties of biosurfactants, which could be explored in food processing and formulation. Potential applications of microbial surfactants in food area and the use of agroindustrial wastes as alternative substrates for their production are discussed.

New starches for the food industry: Curcuma longa and Curcuma zedoaria

The evolution of the food sector has increased interest in the identification of new starches with distinct properties. Curcuma longa and Curcuma zedoaria rhizomes, which are already used in industry to obtain food coloring and pharmaceutical products, may become commercially interesting as starch raw materials. This work aimed to characterize the starch of two Curcuma species. The results revealed that the rhizomes of two species showed low dry matter and high starch contents. The amylose contents of the starches (22% C. longa and 21% C. zedoaria) were similar to potato starch. The results of microscopic analysis showed flat triangular shape and the size was 20-30 mum for two starches. The final viscosity of C longa was high (740 RVU) and the pasting temperature was 81 degreesC. In C. zedoaria the final viscosity was 427 RVU and the pasting temperature was 78 degreesC. These results differed from standard commercially used natural starches. (C) 2003 Elsevier Ltd. All rights reserved.

Application of methylotrophic yeast Pichia pastoris in the field of food industry - A review

Since ancient times, the utilization of yeasts by the man has a great impact on the socio-economic development. After the advent of the technology of recombinant DNA, great advances have occurred due to the acquisition of strains of mutant yeasts in the field of applied research, and Saccharomyces cerevisiae has soon been outstanding as an interesting candidate for the expression of heterologous proteins of biotechnological interest. As the time goes by other alternative systems of expression have been shown because they have advantages over Saccharomyces cerevisiae. Among those new systems, Pichia pastoris is outstanding as methylotrophic yeast capable of growing in a culture medium containing methanol as the only source of carbon and energy. The induction of production of glycerol-3-phosphate dehydrogenase (GPD, NAD(+): oxido-redutase EC 1.1. 1.8) by Pichia pastoris was accomplished in the medium containing methanol. One of the most important key parameters in Pichia pastoris expression system is the methanol concentration. Bibliographic reviews on the Pichia pastoris production system have shown that the best culture conditions vary according to the strain used and/or kind of heterologous protein desired to be expressed. Therefore, we have sought to develop a system, involving expression of glycerol-3-phosphate dehydrogenase in the yeast Pichia pastoris, for generating sufficient quantities of the enzyme in order to asses its potential value for use in various food bioanalytical determination. Dehydrogenases have been widely used in the enzymatic assays of diverse composites of industrial interest, being enclosed among them glycerol and a number of important bioanalytical applications.

Cultivation of Rubrivivax gelatinosus in fish industry effluent for depollution and biomass production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cassava bagasse as a dietary food product

Cassava bagasse, the solid residue of the starch industry, was studied as a potential ingredient in high-fibre dietary products. The bagasse contained 80% of starch, 11.5% fibre, 1.14% ash and 0.85% of protein, and it had a pH of 5.8. Glucose was the major sugar and the hemicellulose content was 22.31%. Microscopic analysis of the bagasse revealed a large number of starch granules inside the parenchyma cells and fibres, as well as outside the cells. The bagasse may be used in high-fibre products, and total or partial hydrolysis of its starch content might increase its commercial value.

Measuring the efficiency of outsourcing: An illustrative case study from the aerospace industry

Outsourcing is related to the action which an organization deals with its suppliers through a kind of business contract where a specific activity or service has been hired to be made. The outsourcing of some activities has become a common practice in the industry, nowadays. It reduces costs, significantly, in the production process and, at the same time, adds some values to the business organization. However it is necessary to measure the performance of these activities. Data Envelopment Analysis (DEA) is a non-parametric method useful to measure comparative performance. It has a wide range of applications measuring comparative efficiency. The Analytic Hierarchy Process (AHP) is a multiple criteria decision-making method that uses hierarchic structures to represent a decision problem and then develops priorities for the alternatives based on the decision-maker's judgments. This paper presents an integrated application based on DEA and AHP to evaluate the efficiency of subcontracted companies in a Brazilian aerospace factory. © 2007 Springer-Verlag London Limited.

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.