Uso de antibióticos para o controle de bactérias endógenas visando à micropropagação da figueira

A descontaminação dos explantes é um dos princípios básicos para o sucesso da cultura de tecidos. Um dos problemas diagnosticados na propagação in vitro da figueira, através de gemas apicais, é a contaminação endógena dos explantes por bactérias. Este trabalho teve como objetivo avaliar a eficiência de alguns antibióticos em meio de cultura para o controle de bactérias endógenas em gemas apicais de figueira. Foram avaliados os seguintes tratamentos: T1(sem adição de antibiótico); T2 (30 mg L-1 de cloranfenicol); T3 (250 mg L-1 de ampicilina sódica); T4 (500 mg L-1 de ácido nalidícico); T5 (150 mg L-1 de cefalotina sódica); T6 (500 mg L-1 de tetraciclina), e T7 (400 mg L-1 de norfloxacina). Após coletados em campo, os segmentos de ramos contendo as gemas foram colocados em recipiente com água corrente. Posteriormente, as gemas apicais foram imersas em álcool etílico a 70% e hipoclorito de sódio a 2,5%. Todo procedimento de desinfestação externa dos explantes foi realizado em câmara de fluxo laminar. Os explantes foram inoculados em tubos de ensaio contendo 15 mL de meio básico MS suplementado, após a autoclavagem, com as doses de antibióticos de acordo com os tratamentos estabelecidos. Após a inoculação, os explantes foram mantidos em sala de crescimento por quatro dias no escuro e, em seguida, sob fotoperíodo de 16 horas de luz branca fria e irradiância de 25 µmol m s-1, na temperatura de 22 ± 3ºC. A assepsia realizada externamente nos explantes foi suficiente para o controle de contaminação fúngica, e a adição de antibióticos ao meio, após autoclavagem, foi eficiente para o controle de bactérias endógenas, cujo antibiótico ampicilina sódica proporcionou mais de 90% de explantes sobreviventes.

Produtividade de pleurotus ostreatus em resíduos da amazônia

The viability of the utilization of wood and agroindustrial residues available in the Amazon region in the formulation of alternative substrates for the cultivation of Pleurotus ostreatus was tested. Thus, two wood residues: marupa sawdust (SIAMP) and pau-de-balsa sawdust (SAPB), and two substrates derived from agroindustrial residues: sugar-cane bagasse (SIACN) and pupunheira stem (SIAPP), were used. These were supplemented with a mixture of rice bran, wheat and corn as protein source, with addition of 2-3% of CaCO(3) for pH correction (6.5). The substrates were placed in polyethylene (HDPE) bags, sterilized at 121 degrees C for 1h and inoculated in a laminar flow chamber. The cultivation was carried out in an axenic way, in a modified atmosphere. The productivity of the substrates was evaluated in relation to the biological efficiency, with the following mean results: 125.60, 99.80%, 94.00 and 64.60% for SIAPP, SIACN, SIAMP and SIAPB, respectively. The high biological efficiency of the substrates and the cultivation process clearly showed the viability of the utilization of the residues, suggesting the commercial cultivation of this mushroom, which may contribute for improving the social and economical conditions and sustainability of the regional biodiversity resources of Amazonia.

Incerteza espacial da emissão de 'CO IND.2' do solo em dois sistemas de manejo da palhada da cana-de-açúcar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dinâmica de carbono e nitrogênio em pastos de capim-xaraés submetidos a diferentes resíduos pós-pastejo

Pós-graduação em Zootecnia - FCAV

Estudo da prevalência de fungos em travesseiros de crianças com rinite e, ou, asma

Pós-graduação em Biologia Geral e Aplicada - IBB

Avaliação in vitro do crescimento micelial de cinco linhagens de Agaricus blazei em duas temperaturas

The objective of the work was to evaluate the in vitro mycelial growth of five A. blazei strains (ABL-05/53, ABL-04/49, ABL-03/44, ABL-99/30 and ABL-02/51) when submitted to the temperatures of 20 and 25 ºC. In a laminar flow chamber, discs of the strains were inoculated in the middle of Petri’s plates containing CA (compost-agar) medium and incubated in BOD. After 48 hours, measurements of the mycelial growth began, with the help of a ruler with scale in millimeters, by means of four equidistant measurements, until the moment when the fungal colony reached near the edges of the Petri’s plate in one of the treatments. The experimental design was totally randomized, in 5 x 2 factorial design. Each treatment consisted of seven repetitions, corresponding to one Petri’s plate, totalizing seventy experimental units. We verified that A. blazei growth is influenced by incubation temperature, being that the temperature of 25 ºC was more favorable for the mycelial growth of all A. blazei strains tested, with attention for ABL-04/49 and ABL-03/44 strains, which obtained the highest averages for mycelial growth under this temperature condition at the end of the cultivation cycle.

Resíduos de bananeira como substrato base para o cultivo in vitro de Coprinus comatus

Coprinus comatus is an edible and lignolitic fungus which has presented great potential for commercial use due to its easy development in the different residues, such as banana tree leave. Thus, the mycelial growth of Coprinus comatus in culture media based on leaves of Thap-Maeo, Prata-Anã, Pelipita and Caipira banana tree cultivars, supplemented with 20% of wheat, soy and rice brans, was evaluated. 7 mm-wide discs of CCO 01/01 strain of C. comatus were inoculated in the middle of Petri dishes containing culture medium, inside a laminar flow chamber. Next, the dishes were arranged totally at random inside an incubator at 25 ºC. The daily measurements of the mycelial growth began after 24 hours, until one of the treatments reached the borders of the Petri dish. According to the results obtained, we verified that there was not effect of the kind of supplementation for culture media based on Thap-Maeo, Prata-Anã and Pelipita; the best growth averages for culture media based on Caipira were provided by wheat and rice brans. Therefore, banana residues may be a viable and ecologically correct choice for the cultivation of C. comatus, especially for Thap-Maeo and Prata Anã sorts, which provided the best growth averages, regardless of the supplementation used.

A flow-injection-ICP system sequential multielemental analysis with simultaneously mercury(II) preconcentration step

A flow-injection system for multielemental analysis with a mercury(II) preconcentration step using a resin Chelite-S(R)(Serva Feinbiochemica Heidelberg, Part No. 41709) packed minicolumn by inductively coupled plasma atomic emission spectroscopy is described. A mercury reductive elution procedure with a mixture of SnCl2/HCl was used, which allows use of 6 mol/L HCl solution instead of concentrated hydrochoric acid. The main parameters related to ICP operation, such as radio frequency power (950-1750 W), auxiliary argon flow (0.0-1.5 L/min) and spray chamber nebulizer pressure (15-35 psi), were studied. Optimization of the FIA system was reached by defining the best eluent carrier stream (1.4-2.8 mL/min), Hgdegrees carrier stream (10-40 mL min(-1)), loading time (0.5-4.0 min), sample flow rate (1.25-10.0 mL/min), temperature of reactor gas liquid separator (GLS) (25-75 degreesC) and eluent volume (50-350 muL). Throughput is around 30 samples per hour for analytical solutions within the range 50-2500 ng Hg(II)/L. Results from certified material showed good precision (RSD < 3%, n = 12) and no statistical difference was observed for real samples analyzed by AAS and by the proposed system.

Reversible intermittent flow-injection determination of mercury in sediments and vinasses by cold vapor atomic absorption spectrometry

A reversible intermittent pow-injection procedure is proposed for the automated determination of mercury in sediments and vinasses by cold vapor atomic absorption spectrometry, CVAAS. Solutions of sample and stannous chloride are carried by two air streams and sequentially injected into the generator/separator chamber in a segmented asynchronous merging zone configuration. The intermittent flow in the forward direction carries the mercury vapor through the flow cell, and in the backward direction, if aspirates the the remaining solution from the vessel to waste. We investigated composition and concentration of reagents, pow rates, commutation times, reactor configuration, and conditions for mercury release. The accuracy was checked by mercury determination in a certified sediment and spiked vinasses and river waters. The system handles about 100 samples per hour (0.50-5.00 mu g L-1), consuming ca. 2.5 mL of sample and 50 mg of SnCl2 per determination; Good recoveries (92-103%) were obtained with spiked samples. Results are precise (RSD <3% for 2.5 mu g Hg L-1, n = 12) and in agreement with values for certified reference material at 95% confidence level. (C) 1999 John Wiley & Sons, Inc.

A hydride generation flow system for determination of arsenic and selenium by total reflection X-ray fluorescence spectrometry

In this work, a preconcentration and separation system based on continuous flow hydride generation is proposed to improve the determination of As and Se by total reflection X-ray fluorescence spectrometry. The generated hydrides are continuously separated from the liquid phase and collected in a chamber containing 250 mul of HCI/HNO3 1:1 (v/v) solution. Hydride generation conditions and collection of the hydrides were evaluated. Under optimised conditions, enrichment factors of 55 for As and 82 for Se were attained. Detection limits of 0.3 mug l(-1) for As and Se were obtained when 20 ml of sample was used. Analysis of a natural water standard reference material from National Institute of Standard and Technology (SRM-1640) was in agreement with the certified values at the 95% confidence level. (C) 2004 Elsevier B.V. All rights reserved.

The influence of the flame structure on the combustion oscillations in a cylindrical chamber

An experimental study has been conducted with the objective of investigating the effects of the flame structure in the combustion oscillation conditions into a laboratorial scale cylindrical chamber. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. To analyze the flame structure the image tomographic reconstruction process were used, and the resultant images were associated to the oscillatory conditions (frequency and amplitude) into the combustion chamber. The main conclusions were: 1) when the flame premixed condition increase, for example 60% of the total air flow rate is premixed with LPG, the region of intense energy released is close to burner exit and strong amplitudes of oscillation (close to 50 mbar) were obtained into the chamber; 2) for long flames, predominantly diffusive flames, just weak amplitudes were detected, in the spite of the speaker exiting the premixed flow; 3) when the energy is released distributed through the combustion chamber, the long flame acts like a baffle. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Mean surface temperature prediction models for broiler chickens-a study of sensible heat flow

Body surface temperature can be used to evaluate thermal equilibrium in animals. The bodies of broiler chickens, like those of all birds, are partially covered by feathers. Thus, the heat flow at the boundary layer between broilers' bodies and the environment differs between feathered and featherless areas. The aim of this investigation was to use linear regression models incorporating environmental parameters and age to predict the surface temperatures of the feathered and featherless areas of broiler chickens. The trial was conducted in a climate chamber, and 576 broilers were distributed in two groups. In the first trial, 288 broilers were monitored after exposure to comfortable or stressful conditions during a 6-week rearing period. Another 288 broilers were measured under the same conditions to test the predictive power of the models. Sensible heat flow was calculated, and for the regions covered by feathers, sensible heat flow was predicted based on the estimated surface temperatures. The surface temperatures of the feathered and featherless areas can be predicted based on air, black globe or operative temperatures. According to the sensible heat flow model, the broilers' ability to maintain thermal equilibrium by convection and radiation decreased during the rearing period. Sensible heat flow estimated based on estimated surface temperatures can be used to predict animal responses to comfortable and stressful conditions. © 2013 ISB.

What is the stimulus for the excavation of fungus chamber in leaf-cutting ants?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)