Effects of Surface Hydration and Application Method on the Bond Strength of Self-Etching Adhesives to Dentin

The effect of application methods and dentin hydration on the bond strength of three self-etching adhesives (SEA) were evaluated; 195 extracted bovine incisors were used. The buccal surface was ground in order to expose the dentin, which remained 2-mm minimum thickness, measured by a thickness meter through an opening on the lingual surface. Adper Single Bond 2 (TM) was used for the control group. The SEA were applied following two modes of application: passive or active and two hydration states of the dentin surface-dry and wet. After light-curing, composite buildups were made using Grandio (TM) composite. The specimens were sectioned and tested with a microtensile bond strength test. The application method and the hydration state resulted in statistical differences (p = 0.000) making the values of active application for mu TBS to dentin higher than passive application. The wet surfaces showed higher mu TBS to dentin ratios than dry surfaces. There were no statistical differences in mu TBS among the SEA tested but there were differences regarding to control group.

Effects of Surface Hydration State and Application Method on the Bond Strength of Self-etching Adhesives to Cut Enamel

Purpose: To evaluate the effect of surface hydration state and application method on the microtensile bond strength of one-step self-etching adhesives systems to cut enamel.Materials and Methods: One hundred ninety-five bovine teeth were used. The enamel on the buccal side was flattened with 600-grit SiC paper. For the control group, 15 teeth received Adper Single Bond 2, applied according to manufacturer's recommendations. The other specimens were divided into three groups according to the adhesive system used: Futura Bond M (FM; Voco), Clearfil S-3 Bond (CS; Kuraray), and Optibond All in One (OA; Kerr). For each group, two hydration states were tested: D: blown dry with air; W: the excess of water was removed with absorbent paper. Two application methods were tested: P (passive): the adhesive was simply left on the surface; A (active): the adhesive was rubbed with an applicator point. A coat of Grandio composite resin (Voco) was applied on the surface. The teeth were sectioned to obtain enamel-resin sticks (1 x 1 mm), which underwent microtensile bond testing. The data in MPa were submitted to a three-way ANOVA and Tukey's test (alpha = 5%).Results: The ANOVA showed significant differences for application method and the type of adhesive, but not for hydration state. For the application method, the results of Tukey's test were: P: 31.46 (+/-7.09)a; A: 34.04 (+/-7.19)b. For the type of adhesive, the results were: OA: 31.29 (+/-7.05)a; CS: 32.28 (+/-7.14)a; FM: 34.68 (+/-7.17)b; different lower-case letters indicate statistically significant differences.Conclusion: Active application improved the bond strength to cut enamel. The adhesive Futurabond M showed the highest bond strength to cut enamel.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.

Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Evaluation of bond strength and thickness of adhesive layer according to the techniques of applying adhesives in composite resin restorations

Adhesive restorations have increasingly been used in dentistry, and the adhesive system application technique may determine the success of the restorative procedure. The aim of this study was to evaluate the influence of the application technique of two adhesive systems (Clearfil SE Bond and Adper Scotchbond MultiPurpose) on the bond strength and adhesive layer of composite resin restorations. Eight human third molars were selected and prepared with Class I occlusal cavities. The teeth were restored with composite using various application techniques for both adhesives, according to the following groups (n = 10): group 1 (control), systems were applied and adhesive was immediately light activated for 20 seconds without removing excesses; group 2, excess adhesive was removed with a gentle jet of air for 5 seconds; group 3, excess was removed with a dry microbrush-type device; and group 4, a gentle jet of air was applied after the microbrush and then light activation was performed. After this, the teeth were submitted to microtensile testing. For the two systems tested, no statistical differences were observed between groups 1 and 2. Groups 3 and 4 presented higher bond strength values compared with the other studied groups, allowing the conclusion that excess adhesive removal with a dry micro-brush could improve bond strength in composite restorations. Predominance of adhesive fracture and thicker adhesive layer were observed via scanning electron microscopy (SEM) in groups 1 and 2. For groups 3 and 4, a mixed failure pattern and thinner adhesive layer were verified. Clinicians should be aware that excess adhesive may negatively affect bond strength, whereas a thin, uniform adhesive layer appears to be favorable. (Quintessence Int 2013;44:9-15)

Influence of management on plankton community of fishponds during the dry and rainy seasons

Aim: The present investigation aims at evaluating attention to the occurrence and abundance of planktonic communities in fishponds and their relationships to the management employed; Methods: Seven fishponds (V1-V7) fertilized with different treatments were analyzed by monthly sampling, taken between July and December/07, during both dry and rainy seasons; Results: Euglenophyceae and Chlorophyceae were most representative during the studied period. In the fishpond with organic fertilizer Cyanobacteria was more than 65 and 90% of total phytoplankton abundance in September and August, mainly represented by Microcystis sp. (14,595 and 22,500 ind.L-1, respectively). An inverse relationship occurred between Copepoda and Cladocera, and Copepoda and Rotifera were present in all fishponds during the both seasons. Diversity (H') and species richness was low and equitability indices generally showed the highest values for zooplankton. The lowest values were observed for phytoplankton during the rainy season; Conclusions: The use of organic fertilizer and the random emptying of the fishponds affected directly and species diversity and richness, with dominance of Cyanobacteria emphasizing the need to adopt a management technique to increase fishponds productivity and consequently, fish production.

Physical, chemical and microbiological aspects during the dry and rainy seasons in a pond covered by macrophyte used in aquaculture water supply

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of micronized whole soybeans to common protein sources in dry dog and cat diets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of supplemented heifers on Marandu grass pastures in the wet-to-dry transition and dry seasons

The objective of the present study was to evaluate the characteristics of the sward canopy of Marandu grass during the rainy season, the wet-to-dry transition and the dry seasons, between March and September 2004, under intermittent grazing, and to correlate those characteristics with the performance of crossbred heifers receiving mineral supplements ad libitum or protein supplements. The experiment consisted of a randomized block design with three blocks (set of 13 paddocks), each containing five crossbred heifers per experimental unit, totaling 15 replicates. The heifers were given protein supplements daily in individual stalls and received an average 4 g/kg/day of the supplement during the rainy season and 5 g/kg/day during the dry season. Their weight gain was assessed monthly. The pasture structure was assessed through destructive sampling, and the bromatological composition of esophageal extrusa samples was also assessed. Analysis of variance was used to assess performance, and regression analysis was used to evaluate the sward canopy characteristics in relation to the months of the year. A cluster procedure was used to determine the similarity between the months of the year under assessment. Two different groups were formed for pasture evaluation: one group including the months of March to July and another group including the months of August and September. The first group exhibited a better canopy structure than the second group. This fact was corroborated by the animal performance, which was lower during the months of the second group. Low-intake protein supplementation was effective in increasing the performance of the grazing heifers. Pasture structure is critical for animal performance in a grazing environment, regardless of the type of supplementation.

Effects of dry sugar cane yeast on the diet intake, digestibility and bovine rumen microbial populations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Supplementation of Nellore young bulls on Marandu grass pastures in the dry period of the year

The objective of this study was to evaluate performance and daytime ingestive behavior of 84 Nellore young bulls in the post-weaning phase kept on Brachiaria brizantha cv. Marandu pastures during the dry season. Treatments were protein mineral supplementation (1 g/kg body weight) and protein+energy mineral supplementation (3 g/kg body weight). The experimental area comprised 12 paddocks in a total area of 27.36 ha, divided in two blocks of six paddocks each, having three replications per treatment in each block, with 42 animals/treatment. The data were subjected to variance analysis with repeated measures over time via procedure PROCMIXED of SAS (Statistical Analysis System, version 9.0) and means were compared by the Tukey test at 5% probability. The initial average weight of animals was 204.8 kg; final weights were 260.9 and 276.9 kg for animals that received protein and protein+energy supplement, respectively. The forage availability, sward height and stocking rate values did not differ with supplementation, but they showed difference between the experimental periods. The average time spent grazing during daylight of animals fed protein+energy supplement was shorter as compared with those which consumed protein supplement. Animals kept under the same pasture conditions during the dry season show better performance when they receive protein+energy supplement than protein supplement.

Nutrition, dry matter accumulation and partitioning and phosphorus use efficiency of potato grown at different phosphorus levels in nutrient solution

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Germination and early growth of soybean, dry bean and turnip grown under Digitaria horizontalis straw

The study aimed to evaluate the possible inhibitory effects of different concentrations of crabgrass (Digitaria horizontalis Willd.) dry mass incorporated to the soil over the germination and early growth of soybean (Glycine max (L.) Merril.), dry bean (Phaseolus vulgaris L.), and turnip (Raphanus raphanistrum L.). The experimental design adopted was completely random, with four replications where, each one was consisted of a 2.5 L capacity pot. Dry mass of crabgrass at equivalent amounts of 0, 2.5, 5.0 and 10 t ha(-1) were incorporated into the soil. Crops seedling emergence was checked daily, and germination, speed germination index, mean germination time, relative frequency and synchronization index of germination were computed at the final of 10 days. The height and dry mass of plants were evaluated at 35 days after sowing. The incorporation to the soil of D. horizontalis dry mass caused significant reduction of the height and dry weight of soybean, dry bean and turnip, but were not observed consistent influence over the germination of these species.

Influence of osmotic dehydration on ascorbic acid loss in pickled dry peppers (Capsicum chinense)

The objective of this work was (1) to develop a dehydrated pepper with 45% humidity, determining the drying curves for pepper, with and without osmotic pre-treatment and (2) to evaluate the influence of both drying and osmotic treatment on the content ascorbic acid (vitamin C) in fresh pepper and pepper with 45% humidity. The experiments were carried out using the peppers cut in half, with and without osmotic pre-treatment, followed by drying in an oven at 70 ºC. The results showed that the osmotic pretreatment did not influence the retention of ascorbic acid during the drying of pepper. The sensory analysis regarding the color, flavor, and texture attributes revealed that there was no difference in the acceptability.

An evergreen neotropical savanna tree (Gochnatia polymorpha, Asteraceae) produces different dry- and wet-season leaf types

Gochnatia polymorpha (Less.) Cabrera is a widespread tree species found in different physiognomies of neotropical savanna (cerrado) formations of south-eastern Brazil. The present study describes some leaf anatomical characteristics of this species as a function of the time of leaf flush, during dry or wet seasons. This species presents anatomical plasticity in the cuticle, palisade parenchyma and abaxial epidermis as well as in stomatal size and stomatal and trichome density, which are leaf structures linked with water-status control. Leaf structure changed to suit the particular environmental conditions during dry and wet seasons. The production of different wet-and dry-season leaf types in G. polymorpha could be a response to drought and an adaptation to environmental constraints in the cerrado.