Boron adsorption in lowland soils from Parana State, Brazil

Boron adsorption by soil is the main phenomenon that affects its availability to plants. This, the present study investigated the effect of liming on B adsorption by lowland soils of Parana State, and to correlate these values with the physical and chemical properties of the soils. Surface samples of three lowland soils [Gleissolo Haplico (GX), Plintossolo Haplico (FX) and Cambissolo Haplico (CX)], with different origin material and physicochemical properties were used. Samples with or without liming application were incubated during 60 days. Boron adsorption was accomplished by shaking 4.0g soil samples, for 24 h, with 20 mL of 0.01 mol L-1 CaCl2 solution containing different concentrations of B (0, 1, 2, 4, 8 and 16 mg L-1). Sorption was fitted to non-linear form of the Langmuir adsorption isotherm. The adsorption isotherms indicated that the B adsorption increased with its increasing concentration in the equilibrium solution. Maximum adsorption capacity of B ranged from 3.0 to 13.9 mg kg(-1) (without liming) and 14.7 to 35.7 mg kg(-1) (with liming). Liming increased the amount of adsorbed B in Gleissolo Haplico and Plintossolo Haplico soils, although the bonding energy has decreased. The amount of adsorbed B by Cambissolo Haplico soil was not affected by liming application. The most important soil properties affecting the B adsorption in lowland soils were pH, clay content, exchangeable aluminum and iron oxide contents.

Intensidade do mal das folhas em plantas jovens e adultas de seis clones de seringueira na região do Vale do Ribeira: South American leaf blight intensity evaluated in six clones of young and adult rubber trees in the Vale do Ribeira region, São Paulo state, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Clones promissores de seringueira para a região do Vale do Ribeira, São Paulo

Este trabalho objetivou apresentar resultados da primeira seleção de clones de seringueira (Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell.Arg.) da série IAC 300, e amazônicos das séries IAN e Fx, em experimento de pequena escala, visando produção, crescimento e resistência ao mal-das-folhas. A produção e o vigor de 20 clones foram avaliados por dois e nove anos, respectivamente, em PariqüeraAçú, no Vale do Ribeira, SP. Os clones IAC 301, IAC 304, IAC 306 e IAC 319 produziram satisfatoriamente nos dois primeiros anos de sangria. Os clones amazônicos IAN 6323, Fx 3864 e IAN 2903, com produções de 1.078 kg, 945 kg e 900 kg/ha/ano, respectivamente, foram superiores à testemunha IAN 873 (878 kg/ha/ano). Os clones selecionados apresentaram crescimento vigoroso, com extremos de perímetro do caule, na abertura do painel, de 37,40 cm (IAN 4493) a 53,75 cm (IAN 6323), e percentual de plantas aptas à sangria de 7,0% (IAN 4493) a 100% (IAN 6323 e IAC 302), exceto os clones Fx 3899 e IAN 3044. O IAC 315, com 7,37 mm, mostrou maior espessura de casca virgem que o IAN 873 (6,44 mm). Os clones IAC 320, IAC 306 e IAC 315 foram os mais resistentes ao Microcyclus ulei.

Fotossíntese e relações hídricas de duas cultivares jovens de seringueira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de clones de seringueira de origem amazônica no planalto do Estado de São Paulo

O objetivo deste trabalho foi avaliar a adaptabilidade e expressão fenotípica de caracteres superiores de dez clones amazônicos de seringueira (Hevea spp.) no planalto do Estado de São Paulo em um período de 10 anos, obedecendo ao delineamento de blocos ao acaso com três repetições e parcelas lineares de seis plantas. O clone IAN 3156 foi o mais produtivo, com média de 65,57 g de borracha seca/árvore/sangria, no período de quatro anos, seguido pelo clone RO 45 com 52,29 g de borracha seca/árvore/sangria, enquanto o clone-testemunha, RRIM 600, produziu 41,04 g/árvore/sangria. Todos os clones apresentaram crescimento vigoroso. O perímetro do caule na abertura do painel variou de 37,01 cm (IAN 3193) a 49,41 cm (IAN 4493). A porcentagem de plantas aptas à sangria variou de 30,0% (IAN 3703) a 93,75% (IAN 6323). Exceto os clones IAN 3156 e IAN 4493 com 7,00 mm e 6,32 mm, respectivamente, todos os outros clones apresentaram espessura de casca virgem inferior ao clone RRIM 600, que apresentou 6,18 mm. O clone IAN 3193 apresentou maior incidência de quebra do ponteiro pelo vento. Todos os clones estudados apresentaram baixa incidência de secamento de painel. O bom desempenho dos clones IAN 3156, RO 45, Fx 3899 e IAN 4493 permite que possam ser experimentados em larga escala, envolvendo diferentes ambientes no Estado de São Paulo.

Nonpreference of the lace bug Leptopharsa heveae Drake & Poor (Heteroptera: Tingidae) for rubber tree clones

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Active and exo-site inhibition of human factor Xa: Structure of des-Gla factor Xa inhibited by NAP5, a potent nematode anticoagulant protein from Ancylostoma caninum

Hookworms are hematophagous nematodes capable of growth, development and subsistence in living host systems such as humans and other mammals. Approximately one billion, or one in six, people worldwide are infected by hookworms causing gastrointestinal blood loss and iron deficiency anemia. The hematophagous hookworm Ancylostoma caninum produces a family of small, disulfide-linked protein anticoagulants (75-84 amino acid residues). One of these nematode anticoagulant proteins, NAP5, inhibits the amidolytic activity of factor Xa (fXa) with K-i = 43 pM, and is the most potent natural fXa inhibitor identified thus far. The crystal structure of NAP5 bound at the active site of gamma-carboxyglutamic acid domainless factor Xa (des-fXa) has been determined at 3.1 angstrom resolution, which indicates that Asp189 (fXa, S1 subsite) binds to Arg40 (NAP5, P1 site) in a mode similar to that of the BPTI/trypsin interaction. However, the hydroxyl group of Ser39 of NAP5 additionally forms a hydrogen bond (2.5 angstrom) with His57 NE2 of the catalytic triad, replacing the hydrogen bond of Ser195 OG to the latter in the native structure, resulting in an interaction that has not been observed before. Furthermore, the C-terminal extension of NAP5 surprisingly interacts with the fXa exosite of a symmetry-equivalent molecule forming a short intermolecular beta-strand as observed in the structure of the NAPc2/fXa complex. This indicates that NAP5 can bind to fXa at the active site, or the exosite, and to fX at the exosite. However, unlike NAPc2, NAP5 does not inhibit fVIIa of the fVIIa/TF complex. (c) 2007 Elsevier Ltd. All rights reserved.

Population Fluctuation and Damage Caused by Phytophagous Mites on Three Rubber Tree Clones

Our aim was to investigate the population fluctuation and the damage caused by the phytophagous mites Calacarus heveae Feres, Tenuipalpus heveae Baker, and Eutetranychus banksi (McGregor) on clones FX 2784, FX 3864, and MDF 180 in rubber tree crops from southeastern Bahia, Brazil. Moreover, we tested for the influence of climatic variables on occurrence patterns of these species throughout weekly samples performed from October to April. The infestation peaks was between mid-January and late February. The clones FX 2784 and FX 3864 had the highest infestations and more severe damage possibly caused by C. heveae, which was the most frequent and abundant species in all clones. We found that sunlight duration and rainfall were the most important factors for C. heveae while T. heveae was affected by rainfall and temperature. Eutetranychus banksi was only affected by sunlight duration. However, the best models had low goodness of fit. We concluded that the clones FX 2784 and FX 3864 had a higher susceptibility to mite attack, and the association between climatic variables and favorable physiological conditions were determinant for the population increase of the species from January to April. © 2012 Sociedade Entomológica do Brasil.

Avaliação da remoção da smear layer das paredes do canal radicular após instrumentação oscilatória ou rotatória e emprego de diferentes pontas de irrigação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atuação de forças em hastes sulcadoras de semeadoras-adubadoras para plantio direto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização anatômica foliar de clones de seringueira (Hevea spp.) visando resistência ao Microcyclus ulei

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Resistência da seringueira ao mal das folhas e modelagem no patossistema Hevea sp. – Microcyclus ulei através dos parâmetros monocíclicos

Pós-graduação em Ciência Florestal - FCA

Estágios foliares, fenologia da seringueira (Hevea spp.) e interação com Microcyclus ulei (mal das folhas)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistência de clones de seringueira à infestação por ácaros

Calacarus heveaeFeres (Eriophyidae) and Tenuipalpus heveae Baker (Tenuipalpidae) can cause heavy defoliation of rubber tree plants. From the perspective of integrated pest management, resistant clones can be an important strategy. The objective of this work was to evaluate the resistance of rubber tree clones to the attack of mites, in an experiment carried out in Votuporanga, SP. The experimental design was a randomized blocks with eighteen treatments and three replications. The treatments were the clones PB 230, PB 243, PB 252, PB 294, PB 306, PB 311, PB 312, PB 314, PB 324, PB 346, PB 350, PB 355, IAC 56, IAC 302, IAC 328, IAC 334, Fx 3899 and RRIM 600. The evaluation of C. heveae and T. heveae populations was performed by counting mites and exuviae presence in six leaflets per plot. The defoliation levels were evaluated with a score scale, varying from 0 (no defoliation) to 4 (above 75% of defoliation). Based on the results, Fx 3899 clone is resistant through non-preference and/or antibiosis to C. heveae. The IAC 56 clone is less susceptible to defoliation caused by C. heveae and T. heveae infestation.

Performance of different rubber tree clones against South American leaf blight (Microcyclus ulei)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)