The effect of CO 2 laser irradiation on failed implant surfaces

The aim of this investigation was to evaluate the cleaning effect of CO 2 on surface topography and composition of failed dental implant surfaces. Ten failed dental implants were retrieved from nine patients (mean age, 46.33 ± 5.81 years) as a result of early or late failure. The implants were divided into two parts: one side of the implant was irradiated with a CO 2 laser (test side), while the other side did not receive irradiation (control side). The CO 2 laser was operated at 1.2 W in a continuous wave for 40 seconds (40 J energy). The handpiece of the CO 2 laser was kept at a distance of 30 mm from the implant surface, resulting in a spot area of 0.031415 cm 2 (38.20 W/cm 2; 1559 J/cm 2) in scanning mode (cervical-apical). One unused dental implant was used as a negative control for both groups. All implant surfaces were examined by scanning electron mi croscopy (SEM) and energy-dispersive spectrometer x-ray (EDS) for element analysis. SEM showed that the surface of the test sides consisted of different degrees of organic residues, appearing mainly as dark stains similar to those observed on the control sides. None of the test surfaces presented alterations such as crater-like alterations, lava-like layers, or melting compared with the nonirradiated surfaces. Foreign elements such as carbon, oxygen, sodium, calcium, and aluminum were detected on both sides. These results suggest that CO 2 laser irradiation does not modify the implant surface, although the cleaning effect was not satisfactory.

Effect of microwave disinfection on physical and mechanical properties of acrylic resins

This study evaluated the effect of microwave energy on the hardness, impact strength and flexural strength of the Clássico, Onda-Cryl and QC-20 acrylic resins. Aluminum die were embedded in metallic or plastic flasks with type III dental stone, in accordance with the traditional packing technique. A mixing powder/liquid ratio was used according to the manufacturer's instructions. After polymerization in water batch at 74°C for 9 h, boiling water for 20 min or microwave energy at 900 W for 10 min, the specimens were deflasked after flask cooling at room temperature, and submitted to finishing. Specimens non-disinfected and disinfected by microwave irradiation were submitted to hardness, impact and flexural strength tests. Each specimen was immersed in distilled water and disinfected in a microwave oven calibrated to 650 W for 3 min. Knoop hardness test was performed with 25 g load for 10 s, impact test was carried out using the Charpy system with 40 kpcm, and 3-point bending test with a crosshead speed of 0.5 mm/min until fracture. Data were submitted to statistical analysis by ANOVA and Tukey's test (α=0.05). Disinfection by microwave energy decreased the hardness of Clássico and Onda-Cryl acrylic resins, but no effect was observed on the impact and flexural strength of all tested resins.

Antimicrobial analysis of chlorhexidine gel and intracanal medicaments against microorganisms inoculated in root canals

The aim of this paper was to evaluate the antimicrobial activity of 2% chlorhexidine gel (CLX) associated with various intracanal medicaments against Candida albicans and Enterococcus faecalis inoculated in root canals. Thirty six human single-rooted teeth were contaminated with C.albicans and E.faecalis. The canals were instrumented using 2% CLX gel and were divided into three groups according to the intracanal medicaments (ICM) used. Group 1: calcium hydroxide paste [Ca(OH)], Group 2: 2% chlorhexidine gel (CLX) and Group 3: 2% CLX gel + Ca(OH). The root canal collections were performed after 21 days of contamination (control collection), after instrumentation (1st collection), after 14 days of intracanal medicament (2nd collection) and 7 days after medicament removal (3rd collection). The microbiological samples were plated in culture media and incubated for 48 hours. The results were submitted to Kruskal-Wallis test (P ≤ 0.05). It was verified that the instrumentation with CLX reduced the number of CFU/ml significantly when compared with the confirmation collection (control). However, the use of the ICM was only capable to eliminate completely the microorganisms in the root canals without difference statistics between them. Although the use of 2% chlorherixidine gel reduces the number of microorganisms significantly, only the ICM calcium hydroxide and calcium hydroxide associated with chlorhexidine are able to eliminate these microorganisms completely.

Contaminação por fungos antes e após limpeza e desinfecção de colchões hospitalares

OBJECTIVE: To verify the existence of fungal contamination prior to and following the cleaning and disinfection process of hospital mattresses used by patients with Candidemia. METHODS: Cross-sectional study analyzing 25 mattresses used by patients with Candidemia confirmed by blood culture from different hospital wards. The study made use of convenience samples. After growing the samples in an Agar Sabouraud Dextrose environment, isolated yeasts were identified by macroscopic, microscopic and physiologic characteristics. RESULTS: Analyses showed 15 (60%) mattresses contaminated by Candida spp. From these, 10 (66.7%) and five (33.3%) mattresses corresponded respectively to the collection prior to and following disinfection, with Candida parapsilosis being the isolated species with the highest frequency. CONCLUSION: Considering that half of the mattresses remained contaminated after cleaning and disinfection, there is a risk that these mattresses may act as potential secondary reservoirs in the infection chain.

The use of radon (Rn-222) and volatile organic compounds in monitoring soil gas to localize NAPL contamination at a gas station in Rio Claro, Sao Paulo State, Brazil

This study focuses on the presence of radon (Rn-222) and volatile organic compounds (VOCs) in soil gases at a gas station located in the city of Rio Claro, Sao Paulo, Brazil, where a fossil fuel leak occurred. The spatial distribution results show a correlation between Rn-222 and VOCs, consistent with the fact that radon gas has a greater chemical affinity with organic phases than with water. This finding demonstrates that the presence of a residual hydrocarbon phase in an aquifer can retain radon, leading to a reduced radon content in the soil gas. The data in this study confirm the results of previous investigations, in which the method used in this study provided a preliminary fingerprint of a contaminated area. Furthermore, the data analysis time is brief, and only simple equipment is required. (C) 2014 Published by Elsevier Ltd.

Influence of a Brazilian sewage outfall on the toxicity and contamination of adjacent sediments

The submarine sewage outfall of Santos (SSOS) is situated in the Santos Bay (São Paulo, Brazil) and is potentially a significant source of contaminants to the adjacent marine ecosystem. The present study aimed to assess the influence of SSOS on the sediment toxicity and contamination at Santos Bay. At the disposal site, sediments tended to be finer, organically richer and exhibited higher levels of surfactants and metals, sometimes exceeding the Threshold Effect Level values. The SSOS influence was more evident toward the East, where the sediments exhibited higher levels of TOC, total S and metals during the summer 2000 sampling campaign. Sediment toxicity to amphipods was consistently detected in four of the five stations studied. Amphipod survival tended to correlate negatively to Hg, total N and % mud. This work provides evidence that the SSOS discharge affects the quality of sediments from Santos Bay, and that control procedures are warranted. (c) 2005 Elsevier Ltd. All rights reserved.

Chronic contamination assessment integrating biomarkers' responses in transplanted mussels-A seasonal monitoring

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contamination of port zone sediments by metals from Large Marine Ecosystems of Brazil

Sediment contamination by metals poses risks to coastal ecosystems and is considered to be problematic to dredging operations. In Brazil, there are differences in sedimentology along the Large Marine Ecosystems in relation to the metal distributions. We aimed to assess the extent of Al, Fe, Hg, Cd, Cr, Cu, Ni, Pb and Zn contamination in sediments from port zones in northeast (Mucuripe and Pecem) and southeast (Santos) Brazil through geochemical analyses and sediment quality ratings. The metal concentrations found in these port zones were higher than those observed in the continental shelf or the background values in both regions. In the northeast, metals were associated with carbonate, while in Santos, they were associated with mud. Geochemical analyses showed enrichments in Hg, Cd, Cu, Ni and Zn, and a simple application of international sediment quality guidelines failed to predict their impacts, whereas the use of site-specific values that were derived by geochemical and ecotoxicological approaches seemed to be more appropriate in the management of the dredged sediments. (C) 2012 Elsevier Ltd. All rights reserved.

Mercury contamination in fanned fish setup on former garimpo mining areas in the Northern Mato Grosso State, Amazonian region, Brazil

The garimpo gold mining activity has released about 2.500 tons of mercury in the Brazilian Amazonian environment in the 1980-1995 period. The northern region of Mato Grosso State, an important gold mining and trading area during the Arnazonian gold rush is now at a turning point regarding its economic future. Nowadays, the activities related to gold mining have only a low relevance on its economy. Thus, the local communities are looking for economic alternatives for the development of the region. Cooperative fish farming is one of such alternatives. However, some projects are directly implemented on areas degraded by the former garimpo activity and the mercury left behind still poses risks, especially by its potential accumulation in fish. The objective of the present study was to evaluate the levels of mercury contamination in two fish farming areas, Paranaita and Alta Floresta, with and without records of past gold-washing activity, respectively. Data such as mercury concentration in fish of different trophic level, size, and weight as well as the water physical and chemical parameters were measured and considered. These preliminary data have shown no significant difference between these two fish fanning areas, relatively to mercury levels in fish. (c) 2004 Elsevier B.V. All rights reserved.

Hermit crabs as bioindicators of recent tributyltin (TBT) contamination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential microbiological contamination of effluents in poultry and swine abattoirs

Health risks in the effluents of seven swine abattoirs and of seven poultry abattoirs were evaluated with regard to environment degradation and to dissemination of pathogenic microorganisms during the rainy and dry seasons. Supply-water samples from affluents and effluents of the treatment systems at different sites within the abattoir processing system were analysed. Similarly, water samples from the three recipient sites (emission point, 100 m upstream, 100 m downstream) were also analysed. Temperature, free residual chlorine (FRC), total coliform bacteria, Escherichia coli, enterococci, identification and serotyping of salmonellae were assessed. Scalding is the most significant stage in the slaughtering chain (P<0.05) when temperature is taken into account. Temperatures Lit effluents and at the sampled sites in the water bodies accorded to state and federal legislation standards. Supply waters did not meet the standards for FRC and microbial count standards according to the Ministry of Health and within limits imposed by the Industrial and Sanitary Inspection Regulations for Animal Products. Feather plucking and evisceration in Poultry slaughter and the cleansing of carcasses and facilities in Poultry and swine slaughtering had the highest contamination impact. The three loci at the water bodies were above the microbiological standards for classes II and III sites, in conformity with Law 8468 of the state of São Paulo, Brazil and Conama. Salmonella was found at several sites during slaughter, at both types of abattoirs, including in the effluent treatment system. This showed that these sites were the dissemination sources of the microorganism.

Processamento mínimo em goiabas 'Paluma' e 'Pedro Sato': 2. Avaliação química, sensorial e microbiológica

Foram utilizados frutos de goiabeiras das cultivares Pedro Sato e Paluma, provenientes de pomar comercial, no estádio de maturação de vez, correspondente à coloração verde-mate e considerados ótimo para o consumo. Os frutos foram inicialmente imersos em solução de hipoclorito de sódio (150mg de cloro.L-1) por 5 minutos, para desinfecção superficial. Pessoas treinadas, utilizando proteção adequada e equipamentos desinfetados descascaram os frutos, cortaram-nos longitudinalmente ao meio e eliminaram a polpa com as sementes, em ambiente a 12°C. Após enxágüe com água clorada (20mg de cloro.L-1) foram embalados em contentores de tereftalato de polietileno (PET) com tampa. Estas unidades foram armazenadas a 3°C por 10 dias. Foram realizadas análises microbiológicas ao longo do período. Determinaram-se quimicamente os conteúdos de lignina, ácido ascórbico, acidez total titulável, sólidos solúveis totais e porcentagem de solubilização das pectinas, bem como as variáveis sensoriais de textura, sabor e preferência. A textura tornou-se mais frágil e os conteúdos de ácido ascórbico se reduziram, ao longo do período de armazenamento, nos produtos de ambas as cultivares. Durante este período houve aumento no conteúdo de lignina e manutenção dos conteúdos de sólidos solúveis totais (SST), acidez total titulável (ATT) e da relação SST/ATT. O produto da cultivar Pedro Sato apresentou menor perda de textura que o da 'Paluma', sendo considerado pelos provadores como o mais saboroso e, portanto, o mais preferido. Devido aos cuidados higiênicos tomados durante o processamento o produto apresentou baixa contagem microbiana (< 10³ UFC.g-1), em todas as avaliações efetuadas.

MICROBIOLOGICAL CONTAMINATION of A HEMODIALYSIS CENTER WATER DISTRIBUTION SYSTEM

The microbiological monitoring of the water used for hemodialysis is extremely important, especially because of the debilitated immune system of patients suffering from chronic renal insufficiency. To investigate the occurrence and species diversity of bacteria in waters, water samples were collected monthly from a hemodialysis center in upstate São Paulo and tap water samples at the terminal sites of the distribution system was sampled repeatedly (22 times) at each of five points in the distribution system; a further 36 samples were taken from cannulae in 19 hemodialysis machines that were ready for the next patient, four samples from the reuse system and 13 from the water storage system. To identify bacteria, samples were filtered through 0.22 mu m-pore membranes; for mycobacteria, 0.45 mu m pores were used. Conventional microbiological and molecular methods were used in the analysis. Bacteria were isolated from the distribution system (128 isolates), kidney machine water (43) and reuse system (3). Among these isolates, 32 were Gram-positive rods, 120 Gram-negative rods, 20 Gram-positive cocci and 11 mycobacteria. We propose the continual monitoring of the water supplies in hemodialysis centers and the adoption of effective prophylactic measures that minimize the exposure of these immunodeficient patients to contaminated sources of water.