PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling

The use of post-consumer materials is directly related to reducing the cost of production and extraction of natural resources. Non-recyclable materials are randomly disposed in the environment. Brazil is one of the largest consumers of PET (polyethylene terephthalate) bottles. The purpose of this paper is to describe the opportunities and challenges of the logistics model for post-consumer PET bottle recycling in Brazil, while providing knowledge of its practices along the recycling chain. The results describe the need to educate those directly and indirectly involved in the process: to reduce consumption in order to reduce the amount of waste generated: to structure the post-consumer reverse chain and engage industrial sectors and government, through public policies, to support cleaner technologies along the PET bottle production chain. (C) 2010 Elsevier B.V. All rights reserved.

Second-order statistics for equal gain and maximal ratio diversity-combining reception

Exact and closed-form expressions for the level crossing rate and average fade duration are presented for equal gain combining and maximal ratio combining schemes, assuming an arbitrary number of independent branches in a Rayleigh environment. The analytical results are thoroughly validated by simulation.

Territorial hypothesis predicts the trade-off between reproductive opportunities and parental care in three species of damselfishes (Pomacentridae: Actinopterygii)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of efficiency and rationality in a sugar-alcohol mill using hyperboloid a-load and potency

Brazil is the world's largest producer of sugar cane and which in the state of São Paulo concentrate the greatest amount of sugar cane field of the country. The sugar-alcohol sector has the capacity to produce sufficient thermal and electrical energy to be used in their process of production and commercialize of surplus in electricity distribution network. Therefore it is necessary to evaluate the energy efficiency and rationality within the mill. Accordingly this research proposed analyze the sugar-alcohol mill's sectors globally and individually, located in the west center of the São Paulo state, using the valuation methodology employed by the Agência Nacional de Energia Elétrica (ANEEL) in the industries that do not have systems of cogeneration. In this analysis, the hyperboloids of load and potency were applied based on the indexes of potency factor and load factor that allow estimate the efficiency and rationality. © 2013 IEEE.

Avaliação do Programa Nacional de Assistência Estudantil - PNAES na UTFPR Câmpus Medianeira

Pós-graduação em Educação - FFC

Diversity management: Challenges, benefits, and the role of human resource management in Brazilian organizations

Purpose The objective of this study was to analyze the major challenges and benefits of diversity management in Brazilian companies by assessing the role of human resources. Design/methodology/approach A total of 15 case studies were carried out on companies that operate in Brazil. Brazil is a country with considerable diversity and multiracial backgrounds. Findings It was found that diversity management in Brazilian companies is still an emerging issue, and the major challenges are related to discriminatory actions taken by coworkers. Among the 15 companies studied, only four had adopted a consistent set of diversity management and human resources practices. These four companies were the only companies to affirm that diversity management requires the strong support of top management and continuous organization to sustain efforts toward incorporating diversity. Originality/value Research studies on diversity management in Brazil are scarce. The findings of this study, however, can be useful to academic professionals and company directors in countries that exhibit similar characteristics to those of Brazil, or to those who are interested in learning more about Brazil. © 2011 Emerald Group Publishing Limited. All rights reserved.

Brazil's new national policy on solid waste: challenges and opportunities

Brazil, one of the world's largest developing countries, has recently introduced a new solid waste management regulatory policy. This new regulatory policy will have implications for a wide variety of stakeholders and sets the stage for opportunities and lessons to be learned. These issues are discussed in this article. © 2013 Springer-Verlag Berlin Heidelberg.

Memórias de uma Escola Isolada Rural: estudo de um Livro de Visitas (1928-1948)

Cet article étudie le livre de visites de l'ancienne école mixte de la Fazenda Ponte Alta/Bela Vista, liée au groupe scolaire de la ville de Bariri, dans l'état de São Paulo (SP). À partir des registres de vingt ans d'activités (1928-1948), nous retraçons les exigences des inspecteurs primaires et si ces exigences provenaient (ou non) de professeurs et de la communauté paysanne pour ébaucher un cadre socio-historique de l'enseignement des premières lettres dans la zone rurale de l'intérieur de l'état de São Paulo. Il en résulte que le discours qui défendait l'égalité de chances pour les populations urbaines et rurales négligeait généralement le besoin de promouvoir l'égalité de conditions pour que la communauté rurale puisse profiter des chances qui lui étaient promises.

Stabilizability and Disturbance Rejection with State-Derivative Feedback

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Progesterone and Ionomycin on Domestic Cat Sperm Motility Patterns and Acrosome Reaction

This study was aimed at assessing the changes in sperm motion patterns and the percentage of acrosome reaction (AR) in domestic cat semen after treatment with either ionomycin or progesterone (P(4)). Ten ejaculates were collected from five tomcats using an artificial vagina, and were diluted, centrifuged and resuspended in a capacitation medium. Samples were evaluated and divided into seven equal aliquots and, after 2 h at 25 degrees C, were incubated for 30 min at 38 degrees C in 5% CO(2) and then analyzed. Computer-assisted sperm analysis and a combination of three fluorescent probes were used to assess sperm plasma, acrosomal membrane integrity and mitochondrial transmembrane potential. Thirty minutes after the start of incubation, P(4) was added (10 mu g/ml) to the P1 group. Groups P2 and P3 were supplemented with P(4) (10 and 20 mu g/ml, respectively) only after 2 h of incubation, and groups I1 and I2 were supplemented with ionomycin (4 and 8 mu M, respectively) 2 h after incubation. Group E was supplemented with ethanol (0.6%) at 2 h after incubation and group C received no supplementation. Ionomycin and P(4) treatments led to a hyperactivation-like sperm motion and an increase (p < 0.05) in the percentage of AR. Although a higher (p < 0.05) percentage of AR was obtained in group I2 when compared with all P(4) groups, a decrease (p < 0.05) in total and progressive motility was observed in I2 group. As I1 group was similar to I2 to induce AR without diminishing sperm motility, we can conclude that ionomycin at 4 mu M seems to be more suitable to trigger AR in domestic cat sperm.

Influence of forest cover and mesohabitat types on functional and taxonomic diversity of fish communities in Neotropical lowland streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In-flight and collisional dissipation as a mechanism to suppress Fermi acceleration in a breathing Lorentz gas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Combined experimental and theoretical study to understand the photoluminescence of Sr1-xTiO3-x

A joint experimental and theoretical study has been carried out to rationalize the results of visible photoluminescence measurements at room temperature on Sr1-xTiO3-x (ST) perovskite thin films. From the experimental side, ST thin films, x = 0 to 0.9, have been synthesized following soft chemical processing, and the corresponding photoluminescence properties have been measured. First principles quantum mechanical techniques, based on density functional theory at the B3LYP level, have been employed to study the electronic structure of a crystalline, stoichiometric (x = 0) ST-s model and a nonstoichiometric (SrO-deficient, x not equal 0) and structurally disordered ST-d model. The relevance of the present theoretical and experimental results of the photoluminescence behavior of ST is discussed. The optical spectra and the calculations indicate that the symmetry-breaking process on going from ST-s to ST-d creates electronic levels in the valence band. Moreover, an analysis of the Mulliken charge distribution reveals a charge gradient in the structure. These combined effects seem to be responsible for the photoluminescence behavior of deficient Sr1-xTiO3-x.

Inequalities in access to education and healthcare

The burden of disease is borne by those who suffer as patients but also by society at large, including health service providers. That burden is felt most severely in parts of the world where there is no infrastructure, or foreseeable prospects of any, to change the status quo without external support. Poverty, disease and inequality pervade all the activities of daily living in low-income regions and are inextricably linked. External interventions may not be the most appropriate way to impact on this positively in all circumstances, but targeted programmes to build social capital, within and by countries, are more likely to be sustainable. By these means, basic oral healthcare, underpinned by the primary healthcare approach, can be delivered to more equitably address needs and demands. Education is fundamental to building knowledge-based economies but is often lacking in such regions even at primary and secondary level. Provision of private education at tertiary level may also introduce its own inequities. Access to distance learning and community-based practice opens opportunities and is more likely to encourage graduates to work in similar areas. Recruitment of faculty from minority groups provides role models for students from similar backgrounds but all faculty staff must be involved in supporting and mentoring students from marginalized groups to ensure their retention. The developed world has to act responsibly in two crucial areas: first, not to exacerbate the shortage of skilled educators and healthcare workers in emerging economies by recruiting their staff; second, they must offer educational opportunities at an economic rate. Governments need to lead on developing initiatives to attract, support and retain a competent workforce.

Influence of cavity preparation and curing method on the marginal seal of resin composite restorations: an in vitro evaluation.

OBJECTIVE: To evaluate the influence of cavity design and photocuring method on the marginal seal of resin composite restorations. METHOD AND MATERIALS: Seventy-two bovine teeth were divided into 2 groups: group 1 received box-type cavity preparations, and group 2 received plate-type preparations. Each group was divided into 3 subgroups. After etching and bonding, Z250 resin composite (3M Espe) was applied in 2 equal increments and cured with 1 of 3 techniques: (1) conventional curing for 30 seconds at 650 mW/cm2; (2) 2-step photocuring, in which the first step was performed 14 mm from the restoration for 10 seconds at 180 mW/cm2 and the second step was performed in direct contact for 20 seconds at 650 mW/cm2; or (3) progressive curing using Jetlite 4000 (J. Morita) for 8 seconds at 125 mW/cm2 and then 22 seconds at 125 mW/cm2 up to 500 mW/cm2. The specimens were thermocycled for 500 cycles and then submitted to dye penetration with a 50% silver nitrate solution. Microleakage was assessed using a stereomicroscope. Data were analyzed using analysis of variance and Tukey test (5% level of significance). RESULTS: A statistically significant difference was found between groups when a double interaction between photocuring and cavity preparation was considered (P = .029). CONCLUSIONS: No one type of cavity preparation or photocuring method prevented micro-leakage. The plate-type preparation showed the worst dye penetration when conventional and progressive photocuring methods were used. The best results were found using the 2-step photocuring with the plate-type preparation.