Environmental impact assessment in Brazil

Brazilian environmental impact assessment (EIA) had a relatively late birth and is still far from being operative by international standards. Currently, geological, economic, and social considerations are more highly valued. Nevertheless, EIA has become important in shaping governmental environmental policy. The state of São Paulo is responsible for 40% of all EIAs produced in Brazil, and the number of EIAs produced is proportional to state population density.

Benefits of soil carbon: report on the outcomes of an international scientific committee on problems of the environment rapid assessment workshop

A Scientific Committee on Problems of the Environment Rapid Assessment (SCOPE-RAP) workshop was held on 18-22 March 2013. This workshop was hosted by the European Commission, JRC Centre at Ispra, Italy, and brought together 40 leading experts from Africa, Asia, Europe and North and South America to create four synthesis chapters aimed at identifying knowledge gaps, research requirements, and policy innovations. Given the forthcoming publication by CABI of a book volume of the outcomes of the SCOPE-RAP in 2014, this workshop report provides an update on the global societal challenge of soil carbon management and some of the main issues and solutions that were identified in the four working sessions.

Life cycle assessment applied to municipal solid waste management: a case study

This study analyzes the environmental performance of the Municipal Solid Waste Management System (MSWMS) of Piedade, São Paulo, from a systemic perspective. A life cycle assessment (LCA) technique was applied according to an attributional approach to evaluate both the current operational situation and different prospective scenarios, which were devised based on the application of targets for recycling dry and wet waste suggested by the pre-draft version of the Brazilian Plan for Solid Waste. The life cycle impact assessment method EcoIndicator 99, in association with normalization and weighting procedures, was used to conduct the analysis. It was observed that the adoption of goals of 30%, 50% and 70% for recovering of the recyclable dry waste, resulted in improvement of the environmental performance of the waste management system under analysis, respectively of 10%, 15% and 20%. It was also possible to detect an evolution in the order of 54% in reducing impacts resulting from the adoption of targets for composting. LCA proved to be effective for the evaluation of the environmental performance of MSWMS-Piedade. However, for future evaluations, the attributional approach should be replaced by the methodological practice of substitution to enable the avoided burdens to be considered in estimations of the environmental performance municipal solid waste management systems.

Integração de critérios técnicos, ambientais e sociais em estudos de alternativas locacionais para implantação de aterro sanitário

A Política Nacional do Meio Ambiente tem como objetivo a conciliação do desenvolvimento econômico e social com a qualidade ambiental, e dispõe de vários instrumentos que procuram contemplara capacidade de suporte do meio. Assim, a discussão sobre a localização das atividades é uma etapa importante para a avaliação da viabilidade ambiental de um determinado empreendimento, notadamente em processos de licenciamento ambiental. O trabalho apresenta uma abordagem metodológica para integração de critérios técnicos, ambientais e sociais em estudos de alternativas de localização de aterros sanitários, com especial atenção à interação entre os aspectos ambientais e os elementos fundamentais de um projeto (a saber, requisitos locacionais e concepção tecnológica), aplicado em um estudo de caso em São Carlos (SP). Como resultados principais, destacam-se o maior foco nos impactos significativos e a possibilidade de envolvimento de segmentos importantes da sociedade previamente à elaboração dos estudos ambientais.

Environmental diagnosis in areas with different use and occupation using the perception of diverse biological activity

In Brazil, the degradation of soil and landscape by urban and agricultural frontiers expansion leads to the need for comprehensive studies and consider the diverse biological activities generated from different interventions in the landscape, becoming an instrument for assessing the impacts and the decision for its environmental management. The objective of this study was to evaluate the influence of different forms of occupation of the landscape, considering ecological elements and their interactions. The work was carried out on the Instituto Agronômico in the county of Jundiai, in the state of Sao Paulo, Brazil. The area under study has been subjected to different use and occupancy for a period of about 40 years. During this period the landscape has been transformed, with the current scenario can be classified as a degraded area mining; grassy area; Araucaria forest and pasture. These areas were evaluated by means of a transect, from which ten sampling sites were selected for the description of diverse biological activities, which included: evaluation and description of ground cover, identifying the presence of fungus and insect species. Furthermore, we evaluated in these points the pH, fertility and porosity of the topsoil (0-0.10 m). The results showed a variation of the elements analyzed and a relationship between the use and occupation of land in the different scenarios of the current landscape. The biological activity was more diverse in the Araucaria forest, reflected by the abundance of litter, higher content of organic matter and soil nutrients, demonstrating the effectiveness of the technique for assessing the level of degradation of the landscape used, which is expeditious and inexpensive.

Avaliação do processo de aprendizagem em alunos de ensino médio sob a perspectiva dos professores: apontamentos referentes a uma proposta de ensino e aprendizagem interdisciplinar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise comparativa dos estudos de impacto ambiental (EIA-RIMA) de projetos dutoviários no Brasil: estudo dos gasodutos Paulínia-Jacutinga, Rio de Janeiro-Belo Horizonte e Urucu-Porto Velho

Pipelines are linear construction that intersect several environments, requiring integration of environmental and technical aspects in its various elaboration steps. Environmental impact assessment if made to integrate the environmental information to enable environmental characterization, possibility identify previously fragilities of environment what contributes to the safety forecast of the significant impacts. These studies shall consider superimpose of the elements and the worsening of critical situations that already exists. In this way, meet and analyse informations about the environmental impact assessment, constructive aspects related to pipelines transport and get environmental impact studies of the case studies, providing the student a critical vision for the discussion of the apropiate balance between description and analysis, methodological rigour and the interface between construction and the environmente with inserts. Performing the critical analysis of methodologies and applied criteria for the environmental diagnosis and impact identification, search improve the methodologies for elaboration of environmental impact studies for linear construction, particulary pipelines, minin conflicts and giving security for the license process. Await provide subsidy to direction data collection, for choosing environmental indicator and for the prognosis and indentification of impacts.

Modelo de avaliação de impacto ambiental utilizando a teoria dos conjuntos fuzzy: um estudo de caso para a indústria automobilística

Pós-graduação em Ciências Ambientais - Sorocaba

Dinâmica de ocupação espacial de áreas contíguas (período 1987-2008) e sua relação com tensores de origem antrópica no manguezal do Rio Cachoeira, Ilhéus, Bahia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O licenciamento ambiental da mineração no Quadrilátero Ferrífero de Minas Gerais: uma análise da implementação de medidas de controle ambiental formuladas em EIAs/RIMAs

Instrumento de política pública ligado ao licenciamento ambiental prévio de projetos de empreendimentos potencialmente degradadores do ambiente, a Avaliação de Impacto Ambiental (AIA), atualmente, apresenta algumas inconsistências. Dentre elas, autores registram a disparidade no que se refere à indicação e à efetiva implantação das medidas de controle ambiental estabelecidas nos EIA/RIMAs. Diante disso, o presente trabalho analisa a implantação das medidas mitigadoras estabelecidas para empreendimentos minerais licenciados pela Fundação Estadual do Meio Ambiente (FEAM) do Estado de Minas Gerais, para a região do Quadrilátero Ferrífero. No estudo, constata-se que intervenções ambientais são hoje partes integrantes dos projetos minerais; porém, como na mineração a operação impõe certo dinamismo ao empreendimento, verifica-se que parte das medidas mitigadoras apontadas no EIA acaba não sendo executada, como o previsto e o aprovado na fase da Licença Prévia (LP), enquanto outras apenas ficam listadas como propostas de mitigação de impactos, deixando de ser efetivamente executadas.

Foraging, diet and community structure in an epigaeic ant (Hymenoptera: Formicidae) assemblage: the role of recruitment

The significance of recruitment systems for community structure of epigaeic ants in a tropical upland forest in southern Brazil was evaluated by examining patterns of spatial occurrence at fixed points. Normal exploratory activity was evaluated with pitfall traps, while the effect of recruitment and diet was evaluated by using honey and sardine baits at the same points. Through techniques developed for environmental impact assessment, the significance of recruitment was evaluated following perturbation, or the placement of bait. Of the 46 species encountered, 15 were sufficiently frequent to study. Of these, only 6 showed significant spatial frequency changes at baits when compared with pitfall trap collections. In one analysis, monthly differences were important for a few smaller species, suggesting thermic limitations, while bait types either increased or decreased spatial point usage. The magnitude of spatial point variation is an index for the strength of recruitment in community organization. Bait types suggest nutritional possibilities of each species. Both recruitment and diet are probably functions of the species composition of the ant community.

Impactos do uso público EM atrativos turísticos naturais no município de AltinóPolis (SP)

This work was developed aiming to evaluate the environmental impacts of the public use in natural touristic attractive at Altinópolis city (SP), using the Visitor Impact Management method (VTM). In each analyzed natural resource a specific questionnaire was elaborated in accordance with the appropriate pointers that allowed to determinate environmental quality of each point. The results indicated that only two tourist areas need special attention for their preservation. Minimization methods, monitoring and educational practices are proposals in order to tourist practices be made with environmental responsibility.

A preliminary physicochemical, exergetic and economic study of hydrogen production utilizing glycerol

This work has as objective to demonstrate technical and economic viability of hydrogen production utilizing glycerol. The volume of this substance, which was initially produced by synthetic ways (from oil-derived products), has increased dramatically due mainly to biodiesel production through transesterification process which has glycerol as main residue. The surplus amount of glycerol has been generally utilized to feed poultry or as fuel in boilers, beyond other applications such as production of soaps, chemical products for food industry, explosives, and others. The difficulty to allocate this additional amount of glycerol has become it in an enormous environment problem, in contrary to the objective of biodiesel chain, which is to diminish environmental impact substituting oil and its derivatives, which release more emissions than biofuels, do not contribute to CO2-cycle and are not renewable sources. Beyond to utilize glycerol in combustion processes, this material could be utilized for hydrogen production. However, a small quantity of works (theoretical and experimental) and reports concerning this theme could be encountered. Firstly, the produced glycerol must be purified since non-reacted amounts of materials, inclusively catalysts, contribute to deactivate catalysts utilized in hydrogen production processes. The volume of non-reacted reactants and non-utilized catalysts during transesterification process could be reutilized. Various technologies of thermochemical generation of hydrogen that utilizes glycerol (and other fuels) were evaluated and the greatest performances and their conditions are encountered as soon as the most efficient technology of hydrogen production. Firstly, a physicochemical analysis must be performed. This step has as objective to evaluate the necessary amount of reactants to produce a determined volume of hydrogen and determine thermodynamic conditions (such as temperature and pressure) where the major performances of hydrogen production could be encountered. The calculations are based on the process where advance degrees are found and hence, fractions of products (especially hydrogen, however, CO2, CO, CH4 and solid carbon could be also encountered) are calculated. To produce 1 Nm3/h of gaseous hydrogen (necessary for a PEMFC - Proton Exchange Membrane Fuel Cell - containing an electric efficiency of about 40%, to generate 1 kWh), 0,558 kg/h of glycerol is necessary in global steam reforming, 0,978 kg/h of glycerol in partial oxidation and cracking processes, and 0,782 kg/h of glycerol in autothermal reforming process. The dry reforming process could not be performed to produce hydrogen utilizing glycerol, in contrary to the utilization of methane, ethanol, and other hydrocarbons. In this study, steam reforming process was preferred due mainly to higher efficiencies of production and the need of minor amount of glycerol as cited above. In the global steam reforming of glycerine, for one mole of glycerol, three moles of water are necessary to produce three moles of CO2 and seven moles of H2. The response reactions process was utilized to predict steam reforming process more accurately. In this mean, the production of solid carbon, CO, and CH4, beyond CO2 and hydrogen was predicted. However, traces of acetaldehyde (C2H2), ethylene (C2H4), ethylene glycol, acetone, and others were encountered in some experimental studies. The rates of determined products obviously depend on the adopted catalysts (and its physical and chemical properties) and thermodynamic conditions of hydrogen production. Eight reactions of steam reforming and cracking were predicted considering only the determined products. In the case of steam reforming at 600°C, the advance degree of this reactor could attain its maximum value, i.e., overall volume of reactants could be obtained whether this reaction is maintained at 1 atm. As soon as temperature of this reaction increases the advance degree also increase, in contrary to the pressure, where advance degree decrease as soon as pressure increase. The fact of temperature of reforming is relatively small, lower costs of installation could be attained, especially cheaper thermocouples and smaller amount of thermo insulators and materials for its assembling. Utilizing the response reactions process in steam reforming, the predicted volumes of products, for the production of 1 Nm3/h of H2 and thermodynamic conditions as cited previously, were 0,264 kg/h of CO (13% of molar fraction of reaction products), 0,038 kg/h of CH4 (3% of molar fraction), 0,028 kg/h of C (3% of molar fraction), and 0,623 kg/h of CO2 (20% of molar fraction). Through process of water-gas shift reactions (WGSR) an additional amount of hydrogen could be produced utilizing mainly the volumes of produced CO and CH4. The overall results (steam reforming plus WGSR) could be similar to global steam reforming. An attention must to be taking into account due to the possibility to produce an additional amount of CH4 (through methanation process) and solid carbon (through Boudouard process). The production of solid carbon must to be avoided because this reactant diminishes (filling the pores) and even deactivate active area of catalysts. To avoid solid carbon production, an additional amount of water is suggested. This method could be also utilized to diminish the volume of CO (through WGSR process) since this product is prejudicial for the activity of low temperature fuel cells (such as PEMFC). In some works, more three or even six moles of water are suggested. A net energy balance of studied hydrogen production processes (at 1 atm only) was developed. In this balance, low heat value of reactant and products and utilized energy for the process (heat supply) were cited. In the case of steam reforming utilizing response reactions, global steam reforming, and cracking processes, the maximum net energy was detected at 700°C. Partial oxidation and autothermal reforming obtained negative net energy in all cited temperatures despite to be exothermic reactions. For global steam reforming, the major value was 114 kJ/h. In the case of steam reforming, the highest value of net energy was detected in this temperature (-170 kJ/h). The major values were detected in the cracking process (up to 2586 kJ/h). The exergetic analysis has as objective, associated with physicochemical analysis, to determine conditions where reactions could be performed at higher efficiencies with lower losses. This study was performed through calculations of exergetic and rational efficiencies, and irreversibilities. In this analysis, as in the previously performed physicochemical analysis, conditions such as temperature of 600°C and pressure of 1 atm for global steam reforming process were suggested due to lower irreversibility and higher efficiencies. Subsequently, higher irreversibilities and lower efficiencies were detected in autothermal reforming, partial oxidation and cracking process. Comparing global reaction of steam reforming with more-accurate steam reforming, it was verified that efficiencies were diminished and irreversibilities were increased. These results could be altered with introduction of WGSR process. An economic analysis could be performed to evaluate the cost of generated hydrogen and determine means to diminish the costs. This analysis suggests an annual period of operation between 5000-7000 hours, interest rates of up to 20% per annum (considering Brazilian conditions), and pay-back of up to 20 years. Another considerations must to be take into account such as tariffs of utilized glycerol and electricity (to be utilized as heat source and (or) for own process as pumps, lamps, valves, and other devices), installation (estimated as US$ 15.000 for a plant of 1 Nm3/h) and maintenance cost. The adoption of emission trading schemes such as carbon credits could be performed since this is a process with potential of mitigates environment impact. Not considering credit carbons, the minor cost of calculated H2 was 0,16288 US$/kWh if glycerol is also utilized as heat sources and 0,17677 US$/kWh if electricity is utilized as heat sources. The range of considered tariff of glycerol was 0-0,1 US$/kWh (taking as basis LHV of H2) and the tariff of electricity is US$ 0,0867 US$/kWh, with demand cost of 12,49 US$/kW. The costs of electricity were obtained by Companhia Bandeirante, localized in São Paulo State. The differences among costs of hydrogen production utilizing glycerol and electricity as heat source was in a range between 0,3-5,8%. This technology in this moment is not mature. However, it allows the employment generation with the additional utilization of glycerol, especially with plants associated with biodiesel plants. The produced hydrogen and electricity could be utilized in own process, increasing its final performance.

Relação do meio físico com o manejo sustentável de plantio de eucalipto em áreas de terrenos acidentados - A Fazenda Santa Edwirges, Vale do Paraíba, Sudeste do Brasil

This study intends to evaluate the effects of landscape physical elements (rocks and relief) associated with silviculture activities. The study was carried out on a small farm (Fazenda Santa Edwirges) covered by Eucalyptus forested situated in the Paraiba do Sul Basin, Southeast Brazil. The methodology consisted of detailed geological and geomorphological studies at 1:10,000 scale, and laboratory analysis of soil physical properties. The results showed three geologic-geomorphologic associations (ridge escarpment with granitic rocks, steep and gentle hills cut by shear zones and gentle hill with alluvial sediments) present high vulnerability for the development of the physical processes such as accelerated erosion landslides and flooding. In contrast, mountains associated with gneissic rocks present smaller vulnerability and high resilience for the development of the physical processes. The results have showed the importance of considering the interactions among landscape physical for the eucalyptus forest management contributing to a better selection area for eucalyptus cultivation and minimize adverse environment impact in road design.