Ensino de gestão da capacidade e da empresa com o apoio do jogo Mercado Virtual no curso de Mestrado Integrado em Engenharia Industrial e Gestão da UMINHO/Azurém e no Programa de Pós-Graduação em Engenharia de Produção da FEB/Bauru/UNESP

O jogo de empresas Mercado Virtual foi desenvolvido para mediar o processo ensino-aprendizagem na área de tomada decisão e gestão de empresas e tem um banco de dados que armazena as decisões dos alunos. Os dados nele armazenados foram analisados em relação ao balanceamento de capacidade, objetivo de lucro e uso de recursos financeiros da empresa e foram encontradas incoerências entre os conteúdos pertinentes ao modelo e as decisões dos alunos. Elas foram classificadas como lacunas de aprendizado. Com o objetivo de analisar se as mesmas se repetem entre alunos do Programa de Mestrado Engenharia de Produção da UNESP de Bauru e Mestrado Integrado em Engenharia Industrial e Gestão da Uminho de Guimarães, Portugal, foram realizados dois experimentos, um em cada grupo. Para realizá-los utilizou-se o jogo Mercado Virtual e uma planilha de dimensionamento da empresa nos dois locais. A Sala de Estudos, os indicadores e o questionário de pesquisa da opinião foram utilizados somente em Portugal. Os resultados mostraram que o jogo é capaz de evidenciar as diferenças de domínio de conteúdo nos dois grupos e, também, que estas diferenças estão associadas aos projetos dos cursos. Sendo uma pesquisa exploratória, os experimentos foram realizados considerando-se somente os controles do jogo. Por isso, propõe-se a realização de pesquisas adicionais combinando controle sobre algumas das variáveis relacionadas do uso do jogo e atuação sobre aprendizagem dos alunos na forma de entrevistas e pesquisas não estruturadas. Conforme previsto, a pesquisa mostrou que os jogos podem ser utilizados com objetivos de aprendizagem mais amplos, considerando-se a avaliação indireta e cruzada sobre as decisões tomadas pelos alunos, como é o caso dos indicadores. Outra contribuição importante da pesquisa refere-se ao uso de jogos de empresas sob condições pouco controladas, ou seja, não houve...

Investigação de novas ferramentas estatísticas e utilização de microcontrolador no monitoramento da queima na retificação plana tangencial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise numérica da convecção natural em dispositivos solar integrados coletor-tanque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da influência da velocidade de mergulho na retificação de aços endurecidos utilizando refrigeração otimizada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise das resistências de embutimento e de compressão para madeiras de pinus e eucalipto

The connections in the wood structures are the places with high concentrations of stresses and therefore are more fragile than the rest of the structure. The connections between pieces of wood can be made by metal pins (nails or screws). The compression and embedment strength has significant influence on the calculation of the connections. The main aim of this work was to evaluate the compression and embedment strength in the directions parallel, inclined at 45° and normal to the grain, using standard specimens according to ABNT NBR 7190/1997 standard. The compression and embedment strength were initially evaluated according to ABNT NBR 7190/1997, which admits the deformation of 2‰ as limit of embedment and the ratio between the ultimate strength and the area of application of load in the specimen for the compressive strength. Afterward, the embedment strength was evaluated by the EUROCEDE 5 /1995 European standard, which use the limit of 5 mm of the displacement for the embedment. Specimens of Pinus oocarpa, Cumaru and Pinus taeda were used in tests to calibration of equipment and specimens of Pinus taeda and Eucalipto citriodora were used to compare the results of strength. The results of strength were evaluated based on statistical analysis. The results of compressive strength for the Pinus taeda showed no significant differences in embedment strength in the directions parallel and normal to the grain. For the Eucalipto citriodora only in the direction parallel to grain the compression strength was not significant compared with the embedment strength. For both species, only the parallel compression strength and inclined at 45o to the grain, which were to the grain, which were admitted the strain of 2‰ were not significantly different compared with the compression strength determined according to ABNT NBR 7190/1997. The normal compression strength obtained according to ABNT NBR 7190/1997 and ultimate compression strength not ...

Análise do comportamento térmico de paredes de madeira

This study consists in the observation and evaluation of the thermal behavior and distribution of wood composite walls, MDF – Medium Density Fiberboard, HDF – High Density Fiberboard, OSB – Oriented Strand Board and EGP – Edge Glued Panel. This study had the objective to present the experimental thermal behavior and to verify which one fit the thermal comfort standards for human labor For this work, was developed a thermal chamber, with one interchangeable side, so the wall prototypes would fit for each experiment. We studied walls made of MDF, HDF, OSB and EGP, which one had its own distinct behavior due to the panel construction. The EGP wall had shown the most reliable material for this usage at high temperatures. With this work, it was demonstrated the importance of choice for the right material and construction method for wooden composite walls, because if they were scaled poorly, the people exposed to them would be uncomfortable by the proportionate environment, and the costs for a resizing would be too high

Criação e implantação de procedimentos logísticos em uma indústria de móveis: estudo de caso

The Brazilian construction is with high production which resulted in many service industries and also for businesses that work in conjunction with it. For the furniture industries would not be different, since they are intimately involved with the construction. To meet the demand for furnishings in Brazil, some clusters of industries have developed in recent years, as in the case of Uba (MG), Arapongas (PR) and Bento Gonçalves (RS). For industries sector can always increase its production combining quality and customer satisfaction, is necessary for their production procedures are studied and improved every day. The aim of this research is to propose a solution for simple information system involving the issue of tracking parts of the furniture produced in an industry custom furniture that depend on outsourced services. The research occurred during four months of the year 2013 for the observation of the production of the industry, where possible observing interference could be carried out with the aim of obtaining improvements in the production line. It is concluded that control of the finished product in a custom furniture industry is a very complex work, because the information system must transmit information faithful, which has not happened formerly, but after the implementation of the identification system was significant improvement the transfer of information between sectors mounts internal and external furniture

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Painel particulado composto por casca de eucalipto na camada intermediária

This work was developed to evalute the physical and mechanical properties of a panel of three particle layers from the test specification of NBR 14810-3 (2006), using wood of Eucalyptus sp. and Eucalyptus saligna and Eucalyptus urograndis bark. The mechanical properties were evaluated to obtain the bending modulus of rupture (MOR) and modulus of elasticity (MOE) and Internal bond. The physical properties were obtained thickness sweeling, water absorption, moisture content and board density. Were evaluated four different compositions of panels containing 5, 10, 15 and 20% in the inner layer of bark. The results were compared with the Brazilian standard NBR 14810-2 (2006) and also with studies in the literature. The panels produced were adequate to all the optimal values suggested by the standard only in the composition with 5% skin in the inner layer. The other treatments showed satisfactory results in all tests except for moisture content

Desenvolvimento de metodologia para a obtenção da cubicagem de madeira em toras empilhadas através de imagens digitais

Obtaining accurate estimates of the volume of stacked wood is important in view of the increasing value of wood as raw material. Therefore, the forest companies have become increasingly concerned about the methods currently used to convert cubic meters for stereo. In this context, emerged the need of optimizing the measurement process and accuracy of the volume of stacked wood. For this, companies have been testing methods with greater efficiency, speed and low operating cost. Existing methods made through approximate equations, and also by determining the conversion factor, called the stacking factor (Fe), are questioned, due to errors and inaccuracies. The use of digital photographs is an alternative method that would minimize operator intervention, allowing greater control and speed the process, thus eliminating part of the imprecision of the traditional method. The use of the method is viable, due to present an error of about 10% while traditional methods showed an error of 17%

Estudo comparativo entre MDF e MDP utilizados na indústria moveleira

Increasingly, the furniture market is competitive. The construction industry presents itself in growth, mainly due to the lines of existing incentives and tax credits established by the government, assisting the impulse to purchase real estate, building materials and furniture. Factors that promote and strengthen the sector's growth. With high demand from the furniture market, demand for higher quality and increasing technological advances, research is often undertaken in search of solutions for process improvement and product features, focusing on the production of materials less harmful to the environment, provision of raw press to lower cost, improve the production process and product development of cost-effective. This research focuses on the comparative study between two materials widely used in furniture manufacturing. MDF (Medium Density Fiberboard) and MDP (Medium Density Particleboard). The subject provides the focus in furniture production, presenting and comparing data collected from three companies producing panels between physical and mechanical characteristics of the materials, also presenting some of the main factors of influence on the quality of the panels, their features and applications on mobile. The study shows the high potential of using the MDP (Medium Density Particleboard) in furniture designs, as well as MDF (Medium Density Particleboard), favoring the final terms of the project , resulting in better utilization of each material , avoiding waste and increase unnecessary cost . Currently, several projects are developed in MDP and MDF furniture, where there is no relevance to their characteristics regarding their limitations. Many of these furnishings are designed without a specific study of the best use and positioning of each material, with better utilization , favoring collateral design , especially furniture designed exclusively for each environment . The lack of technical ...

Influência da geometria de corte no torneamento do eucalipto sp

In contrast to what happened in the past where it was possible to select which species had a lower degree of variation, it is now necessary to use fast-growing species with efficient processing. For that we use the wood of Eucalyptus sp and studies related to the machining processes and their parameters such as wear of cutting tools and roughness. The present work aims to analyze the influence of geometry of cutting tools of high speed steel and the influence of the diameter of the final pieces in the process of turning wood of Eucalyptus sp in relation to power consumption, roughness, temperature machining, chip formed and wear of cutting tools. It was observed that the smaller the diameter of the end parts and greater wear of the tools, the worse quality of the machined surfaces and the greater the power consumed in the process of machining

Fresamento de madeiras de média densidade: MDF

The technological expansion and market manufactured wood as wood paneling makes the research of processes involving this material are increasingly necessary . The present study examines the milling process MDF - fiberboard with average density endmill with helical teeth , with the analysis of the surface finish by evaluating the surface roughness ( Ra) and analysis of the power consumption . We analyzed three types of cuts in milling : concordant , discordant , and cut top . We used 5 rpm (6000 , 8000 , 10000 , 12000 and 14000 RPM) , establishing five-speed cutting, 301 , 402 ,502, 603 and 703 m / min respectively. Five forward speeds and 4, 6, 8, 10 and 12 m / min. Each condition was repeated six times , totaling 180 tests. The results of roughness were obtained from rugosimeter data and the power consumption were obtained by Hall-effect sensor . These results were statistically analyzed using analysis of variance and Tukey test . Finally it was concluded that there are few significant differences between the results themselves vary roughness when cutting speeds and feed and no major differences in power consumption . The best surface quality and lower power consumption were for cutting speed of 703 m / min . To varying forward speed , the speed of 4 m / min showed better surface quality and lower power consumption

Levantamento para a implantação de um sistema de gestão da qualidade segundo a norma NBR ISO/IEC 17025:2005 no Laboratório de celulose e papel da UNESP-Itapeva

The aim of this study is to perform a situational analysis of the Laboratory of pulp and paper-UNESP ITAPEVA for conducting proposal the accreditation according to ISO / IEC 17025:2005. The ISO / IEC 17025 establishes the criteria for those laboratories wishing to demonstrate their technical competence, which have an effective quality system and are able to generate technically valid results, establishing a single international standard for certifying the competence of laboratories to carry tests and / or calibrations, including sampling. The case study was conducted on laboratory Pulp and Paper Universidade Estadual Paulista (UNESP), campus Itapeva, where we compared the views of the technician responsible for the laboratory and a regular user. The generated conclusion is that the laboratory is unable to initiate an accreditation process, because it fails the requirements such as quality manual, register of subcontractors, research of customer satisfaction, schedule of internal audits, schedule for completion of critical analysis, profile of the functions required, functions current description, documentation of technical requirements for accommodation and environmental conditions, calibration programs, equipment calibration program, programs calibration standards and reports and / or certificate of test and / or calibration, that are in accordance with ISO / IEC 17025:2005, beyond that there is not the possibility to develop and implement a quality system without the commitment of everyone involved, regardless of the functional hierarchy

Caracterização físico-mecânica de painel de MDP produzido com madeira de Eucalipto e Bracatinga

This work is the production of particleboard of particles reconstituted from MDP (Medium Density Particleboard) adding particles in the inner layer of Mimosa Scarelli, popularly known as bracatinga, the ratios of 0%, 25%, 50%, 75% and 100%. The panel produced is composed of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending strength, shear strength and residual moisture, and testing of particle size not existing in the standard cited. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests were close to the normative specifications indicating positively the production of MDP with wood decay.