Amylase utilization for the extrusion of dog diets

Effects of amylase addition on extruder parameters, cost of extrusion, kibble quality and digestibility of dog food were measured in two separate experiments. In experiment 1, 120 kilo-novo-alpha-amilase-unit (KNU)/kg of heat stable alpha-amylase produced by Bacillus licheniformis was added in liquid form during a preconditioning period. In experiment 23684 KNU/kg of heat stable alpha-amylase produced by Aspergillus oryzae was mixed with the ingredients before extrusion. The diets were processed in a single screw extruder and submitted to digestibility and on experiment 1 also to palatability tests. Digestibility was tested using 12 dogs, six per diet. Data were submitted to analysis of variance followed by F-test. Amylase addition altered extrusion parameters in both experiments (P<0.05), with higher output (kg of dry matter [DM]/h: 28% and 43% higher in experiments 1 and 2) and less electric energy consumption (kW to produce 100 kg DM: 22% and 29% lower in experiments 1 and 2). Kibble appearance and quality [density (g/L), cutting force (g), and starch gelatinization degree (%)] did not change with enzyme treatment (P>0.05). Likewise, enzyme addition did not change nutrient digestibility, fecal dry matter or food palatability (P<0.05). Taken together our results suggest that amylase promoted the breakdown of amylose chains, thereby reducing the dough viscosity and resistance inside the extruder which allowed for higher product flow and less electricity energy consumption without altering food quality. (C) 2012 Elsevier B.V. All rights reserved.

AVALIAÇÃO DE DUAS METODOLOGIAS DE EXPANSÃO AO FORNO do POLVILHO AZEDO

Duas metodologias de expansão ao forno foram comparadas em 52 amostras de polvilho azedo de três Estados: Santa Catarina, Paraná e Minas Gerais. Os resultados obtidos permitiram visualizar uma proposta de classificação em nível nacional da expansão ao forno do polvilho azedo. No método instrumental foi usado o Farinógrafo Brabender para estabelecer uma massa de consistência padrão de 60UF e no método prático, a consistência semelhante da massa foi determinada de forma empírica. Com a metodologia instrumental obteve-se biscoitos com expansão superior à metodologia prática, mas maior coeficiente de variação, o que pode ser devido a maior sensibilidade do método. Ambas as metodologias poderão ter aplicação, dependendo da finalidade. A metodologia instrumental, pelo custo do equipamento, é mais adequada para laboratórios, desde que se utilize maior número de repetições, para reduzir o coeficiente de variação. Ambas as metodologias ensaiadas permitiram classificar as amostras com o mesmo perfil de desempenho. As amostras provenientes do Estado do Paraná apresentaram as maiores expansões ao forno quando comparados com os outros Estados. Pela metodologia prática a expansão média das amostras do Estado do Paraná foi de 14,1mL/g. As amostras do Estado de Minas Gerais apresentaram as menores expansões ao forno, em média de 13,3mL/g. Foi proposta neste artigo uma classificação para avaliar a qualidade do polvilho azedo, complementando a legislação brasileira que não estabelece este índice para o produto. Quanto à propriedade de expansão ao forno, as amostras avaliadas podem ser divididas em 3 tipos A, B e C. No tipo A (10%) amostras de polvilhos azedo são classificadas como qualidade extra, no tipo B (80%) os polvilhos são de média qualidade e o tipo C (10%) de qualidade inferior. Os resultados obtidos pela metodologia prática permitiram estabelecer como tipo A o polvilho azedo que apresenta um índice de expansão ao forno superior a 16,0mL/g, o tipo B o polvilho com índice de expansão entre 12,0mL/g a 16,0mL/g e o tipo C o polvilho com índice de expansão menor que 12,0mL/g.

ESTUDO da RETENÇÃO ENTRE RESINA ACRÍLICA PARA BASE DE DENTADURA E DENTES DE RESINA ACRÍLICA

Foi avaliada a resistência de união entre dentes e base de dentadura, ambos de resina acrílica. Os dentes foram incluídos em blocos cilíndricos de resina e, posteriormente, torneados, para se obterem cilindros de 5mm de diâmetro. Sobre a extremidade do dente, era adaptado um padrão de cera de mesmo diâmetro, que, após inclusão na mufla, era substituído por resina acrílica termicamente ativada pelo método de processamento convencional de base de dentadura. Como variáveis, usaram-se duas marcas de dentes, duas fases de inclusão (plástica e borrachóide) e aplicação ou não de detergente e monômero sobre os dentes. Os corpos-de-prova, antes dos ensaios de ruptura por tração, foram armazenados em água destilada, a 37ºC, por 2 semanas. Os resultados mostraram que: marca de dente e fase de condensação não influíram nos resultados; somente o uso de detergente ou de monômero aumenta a retentividade e o seu uso conjunto apresenta efeito acumulativo.

Production of Crude Xylanase from Thermoascus Aurantiacus CBMAI 756 Aiming the Baking Process

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Difference variance dispersion graphs for comparing response surface designs with applications in food technology

Variance dispersion graphs have become a popular tool in aiding the choice of a response surface design. Often differences in response from some particular point, such as the expected position of the optimum or standard operating conditions, are more important than the response itself. We describe two examples from food technology. In the first, an experiment was conducted to find the levels of three factors which optimized the yield of valuable products enzymatically synthesized from sugars and to discover how the yield changed as the levels of the factors were changed from the optimum. In the second example, an experiment was conducted on a mixing process for pastry dough to discover how three factors affected a number of properties of the pastry, with a view to using these factors to control the process. We introduce the difference variance dispersion graph (DVDG) to help in the choice of a design in these circumstances. The DVDG for blocked designs is developed and the examples are used to show how the DVDG can be used in practice. In both examples a design was chosen by using the DVDG, as well as other properties, and the experiments were conducted and produced results that were useful to the experimenters. In both cases the conclusions were drawn partly by comparing responses at different points on the response surface.

Physiological responses of pressed baker's yeast cells pre-treated with citric, malic and succinic acids

The dough-leavening power of baker's yeast, Saccharomyces cerevisiae, is strongly influenced by conditions under which the pressed yeast is maintained prior to bread dough preparation. In this study, the influence of the yeast cell's pre-treatment with organic acids (malic, succinic, and citric acids) was investigated at a wide range of pH values when the pressed yeast samples were exposed to 30 degrees C. Increased fermentative activity was observed immediately after pre-treatment of the cells with organic acids. When the pH of the pressed yeast containing added citric acid was raised from 3.5 to 7.5, increases in both fermentative and maltase activities were obtained. Improvements in viability and levels of total protein were also observed during storage in the presence of citric acid, notably at pH 7.5. Glycerol-3-phosphate dehydrogenase activity and levels of internal glycerol also increased in the presence of citrate. on the other hand, pressed yeast samples containing succinic acid at pH 7.5 showed decreased viability during storage despite the maintenance of high levels of fermentative activity, similar to pressed yeast containing malic acid at pH 4.5 and 7.5. Decreases in intracellular levels of trehalose were observed during storage in all cases. Overall, the results of this study revealed the potential benefits of adding organic acids to pressed yeast preparations for baking purposes.

Estádio de Desenvolvimento do Milho. 1. Efeito sobre a Produção, Composição da Planta e Qualidade da Silagem

The objective of this study was to evaluate the influence of maturity on the production, stalk/leaf/ear relationship, chemical composition, and quality of corn silage (Zen mays, L.). Four harvests were made from the early milk (23.49% DM) to the semi-hard dough stage. (30.70%DM). After these evaluations, the corn was ensiled in 200 liter metal drums. After six months of storage, the quality of the silages was determined. The corn dry matter production was higher at the dough and semi-hard dough stages (9866 and 9896 t/ha, respectively) than in the early milk stage (7460 t/ha). The ears with the maturity showed a increase in dry matter (20.93 to 43.51%), acid detergent fiber decrease (32.46 to 18.62%), and maintainance of the crude protein content (average = 8.27%). The stalks and leaves decreased from 33.31 to 27.18% and from 34.17 to 23.66%, respectively, while the ears increased from 32.52 to 49.16% from the early milk to the semi-hard dough stages. All experimental silages attained good quality, independent of corn development stages. The corn can be ensiled from the early milk and soft dough stages without a decrease in silage quality, but the restricting factor under those conditions was a lower dry matter content (24.35 and 28.65%, respectively).

Estádio de Desenvolvimento do Milho. 2. Efeito sobre o Consumo e a Digestibilidade da Silagem em Ovinos

Corn plants were ensiled at the milk, milk-early dough, medium dough, and semi-hard dough stages. The intake and digestibility trials showed that: a) silage DM and NFE contents increased and ADF, cellulose, and lignin contents decreased with plant maturity; b) corn plant maturity had little effect on the digestibility of the silages, but the milk and medium dough stages produced the best results; c) no consistent effect of maturity was observed in DM and CP daily intakes (mean values 41.86 and 26.77/g/kg(75), respectively). Nevertheless, daily digestible dry matter and digestible protein intakes (g/kg(75)) were higher with medium-dough grains (31.74 and 1.97g, respectively) than with the milk (23.27 and 1.45g, respectively) and the milk-early dough stages (22.60 and 1.28g, respectively). However, similar intakes were observed with the medium-dough and semi-hard dough stages. Total digestible nutrient contents of the silages were affected little by corn plant maturity. Nevertheless, statistical differences were Found between the medium dough (70.09%) and the milk-early dough stages (63.07%).

Avaliação do triticale (X triticosecale wittimack) para silagem

Silages from three cultivars of triticale (X Triticosecale wittimack) were evaluated at the UNESP, Jaboticabal, Brazil. The cultivars FCA VJ-CB-01, FCA VJ-CB-02, and FCA VJ-CB-03 were harvested for silage in three growing stages of maturity; beginning of flowering, (S1), milk stage (S2), and dough stages (S3). Data were analyzed by randomized complete block with three replications. The DM (%) values increased while the CP (%DM) and buffering capacity (me HCl/100 g DM) decreased with plant development. Silages of plants harvested at S3 stage had higher pH and N-NH3 values compared to the S1 and S2 silages. The soluble carbohydrates contents (%DM) were higher at the S2 stage (16.9%) and were not different at the S1 (8.7%) and S3 (9.2%) stages. The crude energy contents (Kcal/kg MS) increased while the ADF, NDF, cellulose, and hemicellulose (DM%) decreased due to the presence of dough grains. This was not observed with the lignin contents. The IVDMD values were 66.3, 60.1 and 58.9%, for plants harvested at the S1, S2, and S3 stages, respectively. The results showed that there was no difference among for chemical composition, crude energy, and for IVDMD.

Avaliação da silagem de milho das variedades granífera e forrageira no desempenho de bovinos das raças nelore e cachim em regime de confinamento

The experiment was carried out to evaluate corn grain and corn forage varieties productivity and nutritive value for silage comparing to the performance of Nellore and Canchim cattle in a feedlot. A completely randomized design was used with a 2 x 2 factorial arrangement based on two breeds (Nellore and Canchim) and two corn varieties (grain and forage). Harvest was made after 120 days sowing, when plants showed more than 2/3 of dry. leaves and grains were in dough stage. The silage was stored in a 400 tons. The experimental diet consisted of grain and forage corn silage, 7,2 liters of liquid yeast (1,5 kg of dry yeast/ head/day) and 1,1 kg of ground corn (1,0 kg of dry matter/head/day). The experiment duration was 110 days, with a 20 days adaptation period and 90 days for data collection. Animals were regularly weighted every 28 days. It was concluded that corn grain was more appropriate for silage than corn forage, and in the same stage it showed a higher dry matter content and a 41.3% higher grain yield, promoting higher weight gain and better feed/gain ratio in the feedlot beef cattle.

Estádio de desenvolvimento do milho. 3. Avaliação de silagens por intermédio de parâmetros de fermentação ruminal

The objective of this experiment was to analyze the rumen fermentation of silages made from corn harvested at milk stage (MS), milk early dough stage (MEDS), medium dough stage (MDS) and semi-hard dough stage (SHDS). Rumen fluid was collected from sheep by esophageal tube at 0, 1, 3 and 6 hours after feeding. There were no differences among silages for ammonia nitrogen (NH3-N) and methylene blue reduction time (MBRT). Only the MS and SHDS silages differed in rumen pH (6.82 and 6.53, respectively). Differences in total rumen VFA and acetic acid concentrations (mmoles/L) were observed among stages, but not between MS (36.40 and 22.13) and MEDS (42.49 and 25.73), nor between MDS (64.52 and 40.34 respectively) and SHDS (64.09 and 43.61, respectively). The periods of 1 and 3 hours after feeding showed the smallest pH values (6.47 and 6.63), the highest NH3-N concentrations (9.75 and 10.56 mg/dL) and the highest concentrations of total VFA, and acetic and propionic acids (60.33, 37.05 and 16.73; 59.40, 35.28 and 16.84 mmoles/L, respectively). On the whole, the MDS and SHDS silages showed the best rumen fermentation patterns based on pH and total and individual VFA values.

Sensory profile and preference mapping of orange cakes with addition of prebiotics inulin and oligofructose

Orange cakes with addition of inulin and oligofructose to justify a prebiotic claim (minimum of 3 g of fructans in a 60 g serving of cake) were investigated regarding sensory aspects. The sensory profile of cakes with inulin, with inulin/oligofructose and without prebiotics (standard cake) was evaluated using descriptive quantitative analysis. Preference mapping was assessed using multidimensional scaling on data obtained through an acceptability test with a nine-point hedonic scale. The cakes with prebiotics presented greater crust brownness, dough beigeness, hardness and stickiness than the standard cake and lower crumbliness. Principal Component Analysis (69.5 and 10.7% of explanation to the first and second principal components, respectively) showed that crust brownness, dough beigeness, hardness and stickiness contributed to distinguish the cakes with prebiotics from standard cakes. The sensory acceptability was similar for the three cakes and higher when compared to three commercial cakes, but the preference mapping showed that cakes with prebiotics were preferred to commercial cakes. Addition of prebiotics in orange cakes is feasible, based on the sensory results, which may facilitate marketing of this functional food with sensorial qualities equivalent to conventional products. © 2012 Elsevier Ltd.

Melhoramento das condições de hidratação da levedura seca instantânea de panificação por tratamentos com soluções de aditivos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Linguiça cuiabana: histórico e aspectos tecnológicos de fabricação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Soja crua em dietas extrusadas para gatos

Pós-graduação em Zootecnia - FCAV