The application of distributed virtual machines for enterprise computer management: A two-tier network file system for image provisioning and management

In order to simplify computer management, several system administrators are adopting advanced techniques to manage software configuration of enterprise computer networks, but the tight coupling between hardware and software makes every PC an individual managed entity, lowering the scalability and increasing the costs to manage hundreds or thousands of PCs. Virtualization is an established technology, however its use is been more focused on server consolidation and virtual desktop infrastructure, not for managing distributed computers over a network. This paper discusses the feasibility of the Distributed Virtual Machine Environment, a new approach for enterprise computer management that combines virtualization and distributed system architecture as the basis of the management architecture. © 2008 IEEE.

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Modelo de virtualização distribuída aplicado ao gerenciamento e replicação de cluster multiuso

Pós-graduação em Ciência da Computação - IBILCE

Disponibilidade em um sistema de arquivos distribuído flexível e adaptável

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Middleware de comunicação entre objetos distribuídos para gerenciamento de computadores baseado em redes sem fio (WSE-OS)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efficacy of NiTi rotary instruments in removing calcium hydroxide dressing residues from root canal walls

The aim of this study was to evaluate the efficacy of three rotary instrument systems (K3, ProTaper and Twisted File) in removing calcium hydroxide residues from root canal walls. Thirty-four human mandibular incisors were instrumented with the ProTaper System up to the F2 instrument, irrigated with 2.5% NaOCl followed by 17% EDTA, and filled with a calcium hydroxide intracanal dressing. After 7 days, the calcium hydroxide dressing was removed using the following rotary instruments: G1 - NiTi size 25, 0.06 taper, of the K3 System; G2 - NiTi F2, of the ProTaper System; or G3 - NiTi size 25, 0.06 taper, of the Twisted File System. The teeth were longitudinally grooved on the buccal and lingual root surfaces, split along their long axis, and their apical and cervical canal thirds were evaluated by SEM (×1000). The images were scored and the data were statistically analyzed using the Kruskall Wallis test. None of the instruments removed the calcium hydroxide dressing completely, either in the apical or cervical thirds, and no significant differences were observed among the rotary instruments tested (p > 0.05).

Using serial bluetooth converters as a sensor link in networked control systems

Networked control systems (NCS) are distributed control system in which sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks which enable interoperability between existing wired and wireless systems. This paper presents the feasibility analysis of using a serial RS-232 to Bluetooth converter as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the converter capabilities. In addition the control performance of an implemented motor control system using the converter is analyzed. Experimental results led to the conclusion that serial RS-232 Bluetooth converters can be used to implement wireless networked control systems (WNCS) providing transmission rates and closed control loop times which are acceptable for NCS applications. © 2011 IEEE.

Evaluating serial ZigBee devices for application in wireless networked control systems

Networked control systems (NCS) are distributed control system where the sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks (WNCS) enabling interoperability between existing wired and wireless systems. This paper evaluates a serial RS-232 ZigBee device as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the device capabilities. In addition the control performance of an implemented motor control system using the device is analyzed. Experimental results led to the conclusion that serial RS-232 ZigBee devices can be used to implement WNCS and the use of this device delay information in the PID controller discretization can improve the control performance of the system. © 2012 IEEE.

Mini-inversores para aproveitamento de energia fotovoltaica, com técnicas de MPPT, sincronismo e conexão com a rede de CA em BT, proteção de ilhamento, gerenciamento da energia e da operação

Pós-graduação em Engenharia Elétrica - FEIS

Estudo da comunicação de um compensador série para rede de distribuição com o centro de controle utilizando tecnologia GPRS

Pós-graduação em Engenharia Elétrica - FEIS

Sistema de arquivos distribuído flexível e adaptável

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Camada de gerenciamento para comunicação entre computadores baseada em redes sem fio (WSE-OS)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Implementação e sintonia de um controlador clássico industrial PID: estudo de caso na indústria química

Pós-graduação em Engenharia Mecânica - FEG

Proposta de arquitetura e protocolo para a geração automática de assinaturas de malwares

Given the exponential growth in the spread of the virus world wide web (Internet) and its increasing complexity, it is necessary to adopt more complex systems for the extraction of malware finger-prints (malware fingerprints - malicious software; is the name given to extracting unique information leading to identification of the virus, equivalent to humans, the fingerprint). The architecture and protocol proposed here aim to achieve more efficient fingerprints, using techniques that make a single fingerprint enough to compromise an entire group of viruses. This efficiency is given by the use of a hybrid approach of extracting fingerprints, taking into account the analysis of the code and the behavior of the sample, so called viruses. The main targets of this proposed system are Polymorphics and Metamorphics Malwares, given the difficulty in creating fingerprints that identify an entire family from these viruses. This difficulty is created by the use of techniques that have as their main objective compromise analysis by experts. The parameters chosen for the behavioral analysis are: File System; Records Windows; RAM Dump and API calls. As for the analysis of the code, the objective is to create, in binary virus, divisions in blocks, where it is possible to extract hashes. This technique considers the instruction there and its neighborhood, characterized as being accurate. In short, with this information is intended to predict and draw a profile of action of the virus and then create a fingerprint based on the degree of kinship between them (threshold), whose goal is to increase the ability to detect viruses that do not make part of the same family

Aplicação do conceito de geração distribuída a um sistema fotovoltaico residencial

This work presents a study about distributed generation using photovoltaic systems in the context of smart grids. The characteristics of a Smart Grid and the several aspects this concept involves - distributed generation among them - are discussed. There are also examples of equipment, like smart meters, and of national and international projects. The specificities of distributed generation and the rules and standards necessary in this sort of installation are talked through with focus in the solar energy generation method. Regarding photovoltaic systems, the working principles of the panels are presented, along with its main electrical characteristics and the technologies available. Finally there is a study concerning the sizing of a distributed generation system that involves photovoltaic panels in a residential plant. An analysis of the costs and return of investment period is made about the specific case in consideration.