A tobacco cDNA reveals two different transcription patterns in vegetative and reproductive organs

In order to identify genes expressed in the pistil that may have a role in the reproduction process, we have established an expressed sequence tags project to randomly sequence clones from a Nicotiana tabacum stigma/style cDNA library. A cDNA clone (MTL-8) showing high sequence similarity to genes encoding glycine-rich RNA-binding proteins was chosen for further characterization. Based on the extensive identity of MTL-8 to the RGP-1a sequence of N. sylvestris, a primer was defined to extend the 5′ sequence of MTL-8 by RT-PCR from stigma/style RNAs. The amplification product was sequenced and it was confirmed that MTL-8 corresponds to an mRNA encoding a glycine-rich RNA-binding protein. Two transcripts of different sizes and expression patterns were identified when the MTL-8 cDNA insert was used as a probe in RNA blots. The largest is 1,100 nucleotides (nt) long and markedly predominant in ovaries. The smaller transcript, with 600 nt, is ubiquitous to the vegetative and reproductive organs analyzed (roots, stems, leaves, sepals, petals, stamens, stigmas/styles and ovaries). Plants submitted to stress (wounding, virus infection and ethylene treatment) presented an increased level of the 600-nt transcript in leaves, especially after tobacco necrosis virus infection. In contrast, the level of the 1,100-nt transcript seems to be unaffected by the stress conditions tested. Results of Southern blot experiments have suggested that MTL-8 is present in one or two copies in the tobacco genome. Our results suggest that the shorter transcript is related to stress while the larger one is a flower predominant and nonstress-inducible messenger.

Micro-Shear Bond Strength of Different Adhesives to Human Dental Enamel

The aim of this study was to evaluate the micro-shear bond strength of 5 adhesive systems to enamel, one single-bottle acid-etch adhesive (O), two self-etching primers (P) and two all-in-one self-etching adhesives (S). Method: Sixty premolar enamel surfaces (buccal or lingual) were ground flat with 400- and 600-grit SiC papers and randomly divided into 5 groups (n=12), according to the adhesive system.. SB2 - Single Bond 2 (O); CSE - Clearfil SE Bond (P); ADS - AdheSE (P); PLP - Adper Prompt L-Pop (S); XE3 - Xeno III (S). Tygon tubing (inner diameter of 0.8mm) restricted the bonding area to obtain the resin composite (Z250) cylinders. After storage in distilled water at 37 degrees C for 24h and thermocycling, micro-shear testing was performed (crosshead speed of 0.5mm/min). Data were submitted to one-way ANOVA and Tukey test (a=5%). Samples were also subjected to stereomicroscopic and SEM evaluations after micro-shear testing. Mean bond strength values (MPa +/- SD) and the results of Tukey test were: SB2: 36.36(+/- 3.34)a; ADS: 33.03(+/- 7.83)a; XE3: 32.76(+/- 5.61)a; CSE: 30.61(+/- 6.68)a; PLP: 22.17(+/- 6.05)b. Groups with the same letter were not statistically different. It can be concluded that no significant difference was there between SB2, ADS, XE3 and CSE, in spite of different etching patterns of these adhesives. Only PLP presented statistically lower bond strengths compared with others. J Clin Pediatr Dent 35(3): 301-304, 2011

Structural analysis of Canavalia maritima and Canavalia gladiata lectins complexed with different dimannosides: New insights into the understanding of the structure-biological activity relationship in legume lectins

Plant lectins, especially those purified from species of the Legummosae family, represent the best studied group of carbohydrate-binding proteins. The legume lectins from Diocleinae subtribe are highly similar proteins that present significant differences in the potency/ efficacy of their biological activities. The structural studies of the interactions between lectins and sugars may clarify the origin of the distinct biological activities observed in this high similar class of proteins. In this way, this work presents a crystallographic study of the ConM and CGL (agglutinins from Canavalia maritima and Canavalia gladiata, respectively) in the following complexes: ConM/ CGL:Man(alpha 1-2)Man(alpha 1-0)Me, ConM/CGL:Man(alpha 1-O)Man(alpha 1-O)Me and ConM/CGL:Man(alpha 1-4)Man(alpha 1-O)Me, which crystallized in different conditions and space group from the native proteins.The structures were solved by molecular replacement, presenting satisfactory values for R-factor and R-factor. Comparisons between ConM, CGL and ConA (Canavalia ensiformis lectin) binding mode with the dimannosides in subject, presented different interactions patterns, which may account for a structural explanation of the distincts biological properties observed in the lectins of Diocleinae subtribe. (C) 2007 Elsevier B.V. All rights reserved.

Relative growth, morphological sexual maturity, and size of Macrobrachium amazonicum (Heller 1862) (Crustacea, Decapoda, Palaemonidae) in a population with an entirely freshwater life cycle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Minimum size for the occurrence of vortex matter in a square mesoscopic superconductor

The study of superconducting samples in mesoscopic scale presented a remarkable improvement during the last years. Certainly, such interest is based on the fact that when the size of the samples is close to the order of the temperature dependent coherence length xi(T), and/or the size of the penetration depth lambda(T), there are some significant modifications on the physical properties of the superconducting state. This contribution tests the square cross-section size limit for the occurrence (or not) of vortices in mesoscopic samples of area L-2, where L varies discretely from 1 xi(0) to 8 xi(0).The time dependent Ginzburg-Landau (TDGL) equations approach is used upon taking the order parameter and the local magnetic field invariant along the z-direction. The vortex configurations at the equilibrium can be obtained from the TDGL equations for superconductivity as the system relaxes to the stationary state.The obtained results show that the limit of vortex penetration is for the square sample of size 3 xi(0) x 3 xi(0) in which only a single vortex are allowed into the sample. For smaller specimens, no vortex can be formed and the field entrance into the sample is continuous and the total flux penetration occurs at higher values of H/H-c2(0), where H-c2(T) is the upper critical field. Otherwise, for larger samples different vortices patterns can be observed depending on the sample size. (c) 2007 Elsevier B.V. All rights reserved.

Estudo mecânico da estabilidade dorsal da osteossíntese intramedular associada à fixação externa (método de Ulson)

OBJETIVO: Avaliar o método de Ulson de fixação intramedular associado à fixação externa variando a altura do travamento externo dos fios de Kirschner e sem fixação externa. MÉTODO: Foram utilizadas 18 tíbias de porcos, sendo realizada osteotomia transversal na região da tuberosidade e introduzidos dois fios de Kirschner intramedulares em cada peça, em três diferentes padrões de montagem: grupo I - travamento com minifixador externo com 3,0cm de altura; grupo II - travamento com 4,5cm de altura; grupo III: sem travamento externo. Realizaram-se ensaios mecânicos de cisalhamento, obtendo-se: carga máxima, limite de proporcionalidade e coeficiente de rigidez. RESULTADOS: Não foram encontradas diferenças significativas de carga máxima e limite de proporcionalidade entre os grupos; o grupo II apresentou maior coeficiente de rigidez. CONCLUSÃO: A altura do travamento dos fios de Kirschner no método de Ulson, dentro dos limites avaliados, não prejudicou a estabilidade do sistema de fixação da fratura.

Padrão de remodelação e função ventricular em ratos expostos à fumaça do cigarro

FUNDAMENTO: A relevância do padrão de remodelação no modelo de ratos expostos à fumaça do cigarro não é conhecida. OBJETIVO: Analisar a presença de diferentes padrões de remodelação nesse modelo e sua relação com a função ventricular. MÉTODOS: Ratos fumantes (n=47) foram divididos de acordo com o padrão de geometria, analisado pelo ecocardiograma: normal (índice de massa normal e espessura relativa normal), remodelação concêntrica (índice de massa normal e espessura relativa aumentada), hipertrofia concêntrica (índice de massa aumentado e espessura relativa aumentada) e hipertrofia excêntrica (índice de massa aumentado e espessura relativa normal). RESULTADOS: Os ratos fumantes apresentaram um dos quatro padrões de geometria: padrão normal, 51%; hipertrofia excêntrica:,32%; hipertrofia concêntrica, 13% e remodelação concêntrica, 4%. Os grupos normal e hipertrofia excêntrica apresentaram menores valores de fração de ejeção e porcentagem de encurtamento que o grupo hipertrofia concêntrica. Treze animais (28%) apresentaram disfunção sistólica, detectada pela fração de ejeção e pela porcentagem de encurtamento. Na análise de regressão univariada, os padrões de geometria e o índice de massa não foram fator de predição de disfunção ventricular (p>0,05). Por outro lado, o aumento da espessura relativa da parede foi fator de predição de disfunção ventricular na análise univariada (p<0,001) e na análise multivariada, após ajuste para o índice de massa (p=0,003). CONCLUSÃO: Ratos expostos à fumaça do cigarro apresentam um dos quatro diferentes padrões de remodelação. Entre as variáveis geométricas analisadas, somente o aumento da espessura relativa da parede do ventrículo esquerdo foi fator de predição de disfunção ventricular nesse modelo.

Experimental paracoccidioidomycosis in high and low antibody responder mice of Selection IV-A

High (H) and low (L) responder mice were selected for their ability to produce antibodies against sheep and human erythrocytes (Selection IV-A). In this selection, the difference in antibody responsiveness between H and L lines (HIV-A and LIV-A mice, respectively) was shown to depend mainly on macrophage function. The more rapid catabolism of antigens by macrophages in L mice has been suggested as the main cause of the low antibody production. Due to this high macrophage activity, L animals have been described as more resistant than H animals to intracellular pathogens. These animals were utilized as an experimental model of paracoccidioidomycosis. HIV-A and LIV-A mice were infected with Paracoccidioides brasiliensis by the intravenous route. As expected, H mice were more susceptible to P. brasiliensis with a shorter survival time and higher levels of specific antibodies when compared to L mice. Contrasting with the survival time, the lungs, spleen and liver from H mice showed typical nodular granulomas containing epithelioid and giant cells and few fungi. on the other hand, in LN-A mice, the lesions of these organs were characterized by looser granulomas with irregular borders and the presence of a large number of fungi, However, the adrenal gland showed different lesion patterns. In H mice these lesions were extensive and characterized by loose granulomas with numerous fungi, while in LIV-A mice the lesions were small and limited to the cortex. Moreover the HIV-A mice presented higher levels of serum corticosterone when compared to LIV-A ones. The higher susceptibility of H mice could be attributed to the extensive lesions of the adrenal glands. These results suggest the use of the H line from the IV-A Selection as an experimental model for further studies of adrenal involvement in paracoccidioidomycosis.

Cell-free antigens from precocious Paracoccidioides brasiliensis culture induce a typical delayed-type hypersensitivity reaction

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Independent clonal origin of multiple uterine leiomyomas that was determined by X chromosome inactivation and microsatellite analysis

Objective: In an attempt to clarify the clonality and genetic relationships that are involved in the tumorigenesis of uterine leiomyomas, we used a total of 43 multiple leiomyomas from 14 patients and analyzed the allelic status with 15 microsatellite markers and X chromosome inactivation analysis.Study design: We have used a set of 15 microsatellite polymorphism markers mapped on 3q, 7p, 11, and 15q by automated analysis. The X chromosome inactivation was evaluated by the methylation status of the X-linked androgen receptor gene.Results: Loss of heterozygosity analysis showed a different pattern in 7 of the 8 cases with allelic loss for at least 1 of 15 microsatellite markers that were analyzed. A similar loss of heterozygosity findings at 7p22-15 was detected in 3 samples from the same patient. X chromosome inactivation analysis demonstrated the same inactivated allele in all tumors of the 9 of 12 informative patients;. different inactivation patterns were observed in 3 cases.Conclusion: Our data support the concept that uterine leiomyomas are derived from a single cell but are generated independently in the uterus. Loss of heterozygosity findings at 7p22-15 are consistent with previous data that suggested the relevance of chromosomal aberrations at 7p that were involved in individual uterine leiomyomas. (C) 2005 Mosby, Inc. All rights reserved.

Three-Dimensional Finite Element Analysis of Vertical and Angular Misfit in Implant-Supported Fixed Prostheses

Purpose: Three-dimensional finite element analysis was used to evaluate the effect of vertical and angular misfit in three-piece implant-supported screw-retained fixed prostheses on the biomechanical response in the peri-implant bone, implants, and prosthetic components. Materials and Methods: Four three-dimensional models were fabricated to represent a right posterior mandibular section with one implant in the region of the second premolar (2PM) and another in the region of the second molar (2M). The implants were splinted by a three-piece implant-supported metal-ceramic prosthesis and differed according to the type of misfit, as represented by four different models: Control = prosthesis with complete fit to the implants; UAM (unilateral angular misfit) = prosthesis presenting unilateral angular misfit of 100 pm in the mesial region of the 2M; UVM (unilateral vertical misfit) = prosthesis presenting unilateral vertical misfit of 100 pm in the mesial region of the 2M; and TVM (total vertical misfit) = prosthesis presenting total vertical misfit of 100 pm in the platform of the framework in the 2M. A vertical load of 400 N was distributed and applied on 12 centric points by the software Ansys, ie, a vertical load of 150 N was applied to each molar in the prosthesis and a vertical load of 100 N was applied at the 2PM. Results: The stress values and distribution in peri-implant bone tissue were similar for all groups. The models with misfit exhibited different distribution patterns and increased stress magnitude in comparison to the control. The highest stress values in group UAM were observed in the implant body and retention screw. The groups UVM and TVM exhibited high stress values in the platform of the framework and the implant hexagon, respectively. Conclusions: The three types of misfit influenced the magnitude and distribution of stresses. The influence of misfit on peri-implant bone tissue was modest. Each type of misfit increased the stress values in different regions of the system. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:788-796

Effect of Superstructure Materials and Misfit on Stress Distribution in a Single Implant-Supported Prosthesis: A Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Markers of cell death in salivary glands of males of the tick Rhipicephalus sanguineus (Latreille, 1806) (Acari, Ixodidae)

The salivary glands of Rhipicephalus sanguineus males at stages: unfed (control), at day seven post-attachment, and at days three and seven post-detachment from the host were examined using methods of enzymatic analysis and cell viability. At these stages of feeding, different staining patterns were observed in the cells of type IV, III, II and I acini, which were affected by degeneration in this sequence. Acid phosphatase reaction was inversely proportional to that of ATPase, while ATPase reaction was proportional to membrane integrity.Salivary gland cells of unfed males exhibited intact nucleus and plasma membrane, suggesting that the acid phosphatase detected may participate in the normal physiology of acini. In males at day seven post-attachment, intact membranes were observed in almost all types of acini, as well as stronger reaction for acid phosphatase, nuclear changes, and decrease in ATPase reaction, changes associated with the degenerative process. At days three and seven post-detachment degeneration progress, being observed loss of membrane integrity, nuclear changes, prominent decrease in ATPase reaction, and an increase in acid phosphatase reaction in the first case and a decreased of it at day seven post-detachment from the host. During cell death, alterations occurred in the following sequence: a) nuclear changes, b) loss of ATPase reaction, c) loss of integrity of the plasma membrane, and d) increase of acid phosphatase. The latter might be associated with the late degradation of cytoplasmic remnants, characterizing the process of cell death in glands of R. sanguineus males as atypical or non-classic apoptosis. (C) 2008 Elsevier B.V. All rights reserved.

Biochemical and proteomic effects in Procambarus clarkii after chlorpyrifos or carbaryl exposure under sublethal conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of the shear bond strength of a composite resin in sound, demineralized and hypermineralized bovine dentin after irradiation with Er:YAG and Nd:YAG lasers, employing a self-etching adhesive system

Background and Objectives. The adhesion of dental materials is important for the success of treatment. The aim of this study is to evaluate the bond strength of a composite resin applied with a self-etching adhesive system in different dentins after irradiation with Er:YAG and Nd:YAG lasers, observing their morphologic pattern using Scanning Electronic Microscopy (SEM). Materials and Methods. The buccal surface of 72 bovine incisors was worn until exposure of medium depth dentin. The specimens were divided into three groups; GI: normal, GII: demineralized and GIII: hypermineralized dentin. These were also divided into two subgroups; A-irradiated for 30 s with Er:YAG laser in noncontact mode at 40 mJ and 6 Hz and B- irradiated for 30 s with Nd:YAG laser in contact mode at 60 mJ and 10 Hz. The adhesive system Clearfil SE. Bond (Kuraray) and composite resin Tetric Ceram (Vivadent) were applied on the irradiated area by the incremental technique. After storage for 24 h in distilled water at 37 degrees C, the specimens were submitted to the shear strength test in a universal testing machine (EMIC) at a crosshead speed of 1.0 mm/min. Other specimens were made to be analyzed by SEM. Results. The results were statistically analyzed by Analysis of Variance and the Tukey test. Regardless of the type of dentin, the bond strength of specimens irradiated with the Nd:YAG laser (8,94 +/- 2,07) was higher compared to specimens irradiated with the Er:YAG laser (7,03 +/- 2,47); the highest bond strength was obtained for the group of hypermineralized dentin irradiated with the Nd:YAG laser. The SEM analysis showed that the Er:YAG laser caused opening of tubules and the Nd:YAG laser produced areas of fusion as well as regions of opening of dentinal tubules. Conclusions. The dentin showed different morphological patterns and the laser promote alterations on their surfaces, influencing the bond strength of the composite resin. (C) 2010 Laser Institute of America.