Design and Analysis of Optical Interconnection Networks for a Dataflow Parallel Computer

This work shows the design, simulation, and analysis of two optical interconnection networks for a Dataflow parallel computer architecture. To verify the optical interconnection network performance on the Dataflow architecture, we have analyzed the load balancing among the processors during the parallel programs executions. The load balancing is a very important parameter because it is directly associated to the dataflow parallelism degree. This article proves that optical interconnection networks designed with simple optical devices can provide efficiently the dataflow requirements of a high performance communication system.

Design and analysis of an efficient neural network model for solving nonlinear optimization problems

This paper presents an efficient approach based on a recurrent neural network for solving constrained nonlinear optimization. More specifically, a modified Hopfield network is developed, and its internal parameters are computed using the valid-subspace technique. These parameters guarantee the convergence of the network to the equilibrium points that represent an optimal feasible solution. The main advantage of the developed network is that it handles optimization and constraint terms in different stages with no interference from each other. Moreover, the proposed approach does not require specification for penalty and weighting parameters for its initialization. A study of the modified Hopfield model is also developed to analyse its stability and convergence. Simulation results are provided to demonstrate the performance of the proposed neural network.

Ultrasonic density measurement cell design and simulation of non-ideal effects

This paper presents a theoretical analysis of a density measurement cell using an unidimensional model composed by acoustic and electroacoustic transmission lines in order to simulate non-ideal effects. The model is implemented using matrix operations, and is used to design the cell considering its geometry, materials used in sensor assembly, range of liquid sample properties and signal analysis techniques. The sensor performance in non-ideal conditions is studied, considering the thicknesses of adhesive and metallization layers, and the effect of residue of liquid sample which can impregnate on the sample chamber surfaces. These layers are taken into account in the model, and their effects are compensated to reduce the error on density measurement. The results show the contribution of residue layer thickness to density error and its behavior when two signal analysis methods are used. (c) 2006 Elsevier B.V. All rights reserved.

Identification and analysis of single nucleotide polymorphisms (SNPs) in citrus

Most of the cultivated species of citrus have narrow genetic basis. Relationships among species and cultivars are obscured by sexual compatibility, polyembryony, apomixis and a high incidence of somatic mutations. DNA analysis is crucial in genetic studies not only for citrus breeding programs but also for characterization of hybrids and species. In this paper, single nucleotide polymorphisms ( SNPs) were investigated in 58 accessions of Citrus, hybrids and related genera. Genomic sequences of 'Pera IAC' sweet orange ( Citrus sinensis L. Osbeck) were used for primer design and selection of sequence tagged sites (STSs) for identification of SNPs. Analysis of 36 STSs showed identical sequences among 40 of the 41 sweet orange accessions studied. However, these accessions were heterozygous for many SNPs. Ten selected STSs were analyzed in 17 additional accessions from 13 species and hybrids. Comparing to the 'Pera IAC' sweet orange accession, a total of 150 polymorphic nucleotides were identified and most of the alterations were transitions ( 52.7%). The greatest number of SNPs was observed in Poncirus trifoliata ( L.) Raf. and the smallest in 'Ponkan' mandarin ( Citrus reticulata Blanco). At the intra-specific level, 'Bafa Gigante' ( Citrus sinensis L. Osbeck) was the only sweet orange accession with a divergent SNPs genotype, which corroborates the hypothesis of a hybrid origin for this accession. Although the STSs analyzed represent randomly sampled genomic sequences, they provided consistent information about the level of polymorphism and showed the potential of SNPs markers for characterization and phylogenetic studies.

Design and ergonomics of package inserts of drugs in Brazil: a reality in construction

This research deals with the design of leaflets of medicines, evidencing the problems resulting from the lack of Brazilian normalization to promote the use of the graphical representation of instructional texts warnings. It approaches studies related to the effectiveness and efficiency of information systems, highlighting the semiotics and the cultural and informational ergonomics. The analysis of the context uses as method, an analytical study on selected warnings of thirty leaflets of medicines, followed by interviews lead with the public managers involved with the regulation of the pharmaceutical companies, and two experiments with users performed in city of Recife, in State of Pernambuco: one aiming at to identify how they interact with the leaflets of medicines, and the second one testing their understanding concerning standardized illustrations in the United States and the South Africa. The results show the need for improvements in presentation and graphic representation of leaflets of medicines, powering them to the role of communication, to ensure the consumption of medicine safely by its users. The conclusion congregates parameters and recommendations for the graphic representation of warnings in leaflets of medicines in Brazil.

Design and implementation of wireless sensor networks for impedance-based structural health monitoring using ZigBee and Global System for Mobile Communications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of simple hardware efficiency for temperature measurement in agriculture and environment

This work focuses basically on the design and analysis of simple and low cost hardware systems efficiency for temperature measurement in agricultural area. The main objective is to prove quantitatively, through statistical data analysis, to what extent a simple hardware designed with inexpensive components can be used safely in the indoor temperature measurement in farm buildings, such as greenhouses, warehouse or silos. To verify the of simple hardware efficiency, its data were compared with data from measurements with a high performance LabVIEW platform. This work proved that a simple hardware based on a microcontroller and the LM35 sensor can perform well. It presented a good accuracy but a relatively low precision that can be improved when performed some consecutive signal sampling and then used its average value. Although there are many papers that explain these components, this work has the distinction of presenting a data analysis in numerical form and using high performance systems to ensure critical data comparison.

Isolation of Pseudomonas aeruginosa strains from dental office environments and units in Barretos, state of São Paulo, Brazil, and analysis of their susceptibility to antimicrobial drugs

Uma ampla variedade de patógenos oportunistas tem sido detectadas nos tubos de alimentação de água dos equipos odontológicos, particularmente no biofilme formado na superfície do tubo. Entre os patógenos oportunistas encontrados nos tubos de água, Pseudomonas aeruginosa é reconhecida como uma das principais causadoras de infecções nosocomiais. Foram coletadas 160 amostras de água e 200 amostras de fomites em quarenta clinicas odontológicas na cidade de Barretos, São Paulo, Brasil, durante o período de Janeiro a Julho de 2005. Setenta e seis cepas de P. aeruginosa, isoladas a partir dos fomites (5 cepas) e das amostras de água (71 cepas), foram analisadas quanto à susceptibilidade à seis drogas antimicrobianas freqüentemente utilizadas para o tratamento de infecções provocadas por P. aeruginosa. As principais suscetibilidades observadas foram para a ciprofloxacina, seguida pelo meropenem. A necessidade de um mecanismo efetivo para reduzir a contaminação bacteriana dentro dos tubos de alimentação de água dos equipos odontológicos foi enfatizada, e o risco da exposição ocupacional e infecção cruzada na prática odontológica, em especial quando causada por patógenos oportunistas como a P. aeruginosa foi realçado.

Strain differentiation of Trichophyton rubrum by randomly amplified polymorphic DNA and analysis of rDNA nontranscribed spacer

Trichophyton rubrum is the most common pathogen causing dermatophytosis. Molecular strain-typing methods have recently been developed to tackle epidemiological questions and the problem of relapse following treatment. A total of 67 strains of T rubrum were screened for genetic variation by randomly amplified polymorphic DNA (RAPD) analysis, with two primers, 5'-d[GGTGCGGGAA]-3' and 5'-d[CCCGTCAGCA]-3', as well as by subrepeat element analysis of the nontranscribed spacer of rDNA, using the repetitive subelements TRS-1 and TRS-2. A total of 12 individual patterns were recognized with the first primer and 11 with the second. Phylogenetic analysis of the RAPID products showed a high degree of similarity (> 90 %) among the epidemiologically related clinical isolates, while the other strains possessed 60% similarity. Specific amplification of TRS-1 produced three strain-characteristic banding patterns (PCR types); simple patterns representing one copy of TRS-1 and two copies of TRS-2 accounted for around 85 % of all isolates. It is concluded that molecular analysis has important implications for epidemiological studies, and RAPID analysis is especially suitable for molecular typing in T. rubrum.

Rapid determination of desorption efficiency, and analysis of solvent mixtures for occupational exposure studies

An analytical procedure has been developed for simultaneous determination of solvent mixture vapors to enable evaluation of occupational exposure. To determine the desorption efficiency the volatile components of the solvent mixtures were generated from a glass tube filled with glass wool. This device is easy to prepare and use. These vapors were then collected in activated charcoal tubes and analyzed by capillary gas chromatography. The method was tested with a mixture of 22 solvents, including aliphatic and aromatic hydrocarbons, alcohols, ethers, esters, and ketones, oil at low concentrations. All the components were defected. When a 99: 1 mixture of carbon disulfide-dimethylformamide was used for desorption the efficiency was > 75% for most of the solvents.

Modeling and analysis of artificial neural networks applied in operations research

Artificial neural networks are dynamic systems consisting of highly interconnected and parallel nonlinear processing elements. Systems based on artificial neural networks have high computational rates due to the use of a massive number of these computational elements. Neural networks with feedback connections provide a computing model capable of solving a rich class of optimization problems. In this paper, a modified Hopfield network is developed for solving problems related to operations research. The internal parameters of the network are obtained using the valid-subspace technique. Simulated examples are presented as an illustration of the proposed approach. Copyright (C) 2000 IFAC.

Mechanical Strength and Analysis of Fracture of Titanium Joining Submitted to Laser and Tig Welding

This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG) welds in cylindrical rods of commercially pure titanium (cp Ti) with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and positioned in a plasma arc welding machine under argon atmosphere and vacuum, and titanium was injected under vacuum/pressure. The samples were X-rayed to detect possible welding flaws and randomly assigned to three groups to test the tensile strength and the fracture mechanism: intact, laser welding, and TIG welding. The tensile test results were investigated using ANOVA, which indicated that the samples were statistically similar. The fracture analysis showed that the cpTi samples subjected to laser welding exhibited brittle fracture and those subjected to TIG welding exhibited mixed brittle/ductile fracture with a predominance of ductile fracture with the presence of microcavities and cleavage areas. Intact samples presented the characteristic straightening in the fracture areas, indicating the ductility of the material.

Design and synthesis of peptides from bacterial ParE toxin as inhibitors of topoisomerases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION

A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.

Representation and analysis of soccer players' actions using principal components

This paper proposes the use of the Principal Components Analysis (PCA) method to represent and to analyse soccer players' actions distribution in the pitch. The seven games of the Brazilian National Team during the 2002 World Cup were analysed. The player's position actions were measured from videotapes in a computer interface. The results were: a) the graphical representation, given by two orthogonal segments in the two directions of maximal variability and centred at the mean of each player's actions position; b) the eccentricity measurement, given by the variability ratio and c) the actions zone area, given by variability product. The results showed that the individual characteristics of acting were well represented by the PCA, allowing comparisons among games and providing insights related to the tactical organisation of the team.