Mineralogical characterization of clays used in the structural ceramic industry in west of S. Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Absence of detection of xanthomonas axonopodis pv. malvacearum in cotton seeds used in the Northeast Region of Mato Grosso do Sul in a three-based crop season study

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of cotton cultivars differing in gossypol content on the quality of Aphis gossypii as prey for two species of Coccinellidae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Detached leaf culture: Viability to evaluate 2,4-D toxicity symptoms in cotton apex leaves

To study the viability of detached leaf culture technique, studies were carried out with detached leaves from cotton apex (true trilobed leaves). The prepared leaves were sprayed with 2,4-D amine and ester, at rates of 10, 30, 70, and 100% of the recommended doses. Detached leaves without herbicide spray were used as controls. Simultaneously, a greenhouse experiment was conducted with the same treatments as used for the detached leaves experiment. Toxicity was measured through a 0-to-5 grading according to the percentage of affected leaf area in the detached leaves experiment or examining the affected rate of whole plant as indicated in the greenhouse. Results showed that the ester form of the herbicide induced earlier and more severe toxicity symptoms in detached leaves and greenhouse grown plants. Positive and significant correlations (p < 0.001) were found between toxicity results obtained at 7 and 14 days after application in detached leaves and greenhouse plants (r = 0.97 and 0.92, respectively). Negative, significant correlations (p < 0.005) were found between the toxicity levels found at 7 and 14 days after application in detached leaves and dry matter of cotton plants grown in the greenhouse (r = -0.92 and -0.92, respectively).

Plant growth regulator losses in cotton as affected by adjuvants and rain

Nas maiores regiões algodoeiras no Brasil, chove mais de 1.500mm anuais, existindo risco de ocorrer lavagem de reguladores de crescimento aplicados às folhas do algodoeiro, antes que sejam absorvidos. O objetivo deste trabalho foi avaliar a lavagem dos reguladores de crescimento cloreto de mepiquat e cloreto de chlormequat de folhas de algodoeiro por chuva, ocorrendo em diferentes momentos após a aplicação. O trabalho foi realizado em casa de vegetação. Ambos os reguladores foram aplicados no aparecimento do primeiro botão floral, na dose de 15g ha-1 de i.a. com e sem adjuvante siliconado, e chuva simulada foi aplicada aos 0, 0,75; 1,5; 3,0; 6,0; 12,0 e 24 horas após a aplicação dos reguladores, mais um tratamento sem chuva. A adição de adjuvante siliconado melhorou a absorção dos produtos. A ocorrência de chuva até mesmo 24 horas após a aplicação dos reguladores pode lavar parte dos produtos das plantas de algodoeiro, com maior intensidade para o tratamento sem adjuvante. A redução da absorção do produto leva à necessidade de reaplicá-lo para que possa haver a sua ação, sem comprometer sua função.

Compared boron uptake and translocation in cotton cultivars

O boro (B) tem baixa mobilidade no floema das plantas e é reconhecidamente o micronutriente cuja deficiência é mais comum no algodoeiro. Neste trabalho foi estudada a absorção e mobilidade do B em cultivares de algodão. O experimento foi conduzido em casa de vegetação, e as plantas foram cultivadas em solução nutritiva. Os tratamentos foram constituídos de três cultivares de algodão (FMT 701, DP 604BG e FMX 993) e cinco doses de B (0,0; 2,5; 5,0; 10,0 e 20,0 µmol L-1). As avaliações foram feitas em quatro semanas consecutivas, a partir da primeira semana após emissão do primeiro botão floral. A época de aparecimento e a intensidade de sintomas de deficiência de boro entre cultivares de algodão são diferentes. A cultivar DP604BG é inicialmente menos exigente em B, porém há necessidade de maior disponibilidade desse micronutriente no meio nutritivo para evitar o aparecimento de deficiência. O crescimento do algodoeiro é prejudicado pela carência de B, independentemente das diferenças no aparecimento de sintomas, não havendo diferença entre as cultivares.

Determination of pesticides multiresidues in shallow groundwater in a cotton-growing region of Mato Grosso, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Rainfall intensity and Mepiquat Chloride persistence in cotton

Em parte das regiões onde se encontram as maiores áreas de algodão no Brasil atualmente, o índice pluviométrico está ao redor de 2.000 mm anuais, existindo risco de ocorrer lavagem do Cloreto de Mepiquat (CM) das folhas do algodoeiro antes de ser absorvido pelas plantas. O objetivo deste trabalho foi avaliar a lavagem do CM aplicado no algodoeiro por diferentes laminas de chuva simulada. Os tratamentos constaram de três doses do regulador à base de cloreto de mepiquat: 0, 15.0 e 30.0 g ha-1 e quatro lâminas de chuva simulada: 5, 10, 20 e 40 mm, mais um tratamento sem chuva. Foram utilizados vasos de 12 litros de capacidade e a cultivar Delta Opal. Os parâmetros avaliados foram: altura de plantas, número de ramos reprodutivos, massa de matéria seca, retenção de estruturas reprodutivas e área foliar. Quanto maior a intensidade de chuva ocorrida após a aplicação do regulador maior foi o comprometimento da ação do produto, que repercutiu em interferência no crescimento das plantas. Chuvas de 5.0 mm, ocorridas 90 minutos após a aplicação do cloreto de mepiquat, já causaram prejuízo na ação do produto no crescimento do algodoeiro, sendo o efeito maior com o aumento da quantidade de chuva simulada.

User-producer interaction in the Brazilian oil industry: The relationship between petrobras and its suppliers of wet Christmas tree

The objective of this work is to analyze the importance of the user-producer interaction for the innovative process of the Brazilian oil industry from the 2000s. To do so, we selected two of the three providers installed in Brazil that produce the set of valves used in the oil wellhead to control its production, set which is called wet Christmas tree (WCT), the Norway's Aker Solutions and the American FMC Technologies. The results of this analysis indicate not only the development of the oil industry in Brazil is marked by a strategy of cooperative innovation, but they also reveal the importance of geographical proximity and direct cooperation, especially between the centers of engineering and research and development of companies. Furthermore, these partnerships are not limited to the adaptation of products to new needs, but they also include the development of new systems. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Releasing number of Telenomus remus (Nixon) (Hymenoptera: Platygastridae) against Spodoptera frugiperda Smith (Lepidoptera: Noctuidae) in corn, cotton and soybean

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Thermodynamic and economic analysis of hydrogen production integration in the Brazilian sugar and alcohol industry

One of the biggest challenges today is to develop clean fuels, which do not emit pollutant and with viable implementation. One of the options currently under study is the hydrogen production process. In this context, this work aims to study the technical and economical aspects of the incorporation process of hydrogen producing by ethanol steam reforming in the sugar cane industry and MCFC (molten carbonate fuel cell) application on it to generate electric power. Therefore, it has been proposed a modification in the traditional process of sugar cane industry, in order to incorporate hydrogen production, besides the traditional products (sugar, ethylic, hydrated and anhydric alcohol). For this purpose, a detailed theoretical study of the ethanol production process, describing the considerations to incorporate the hydrogen production will be performed. After that, there will be a thermodynamic study for analysing the innovation of this production chain, as well as a study of economic engineering to allocate the costs of products of the new process, optimising it and considering the thermoeconomics as being as an analysis tool. This proposal aims to improve Brazil's position in the ranking of international biofuels, corroborating the nation to be a power in the hydrogen era. (C) 2013 Elsevier Ltd. All rights reserved.