The effect of actuator and sensor placement on the active control of rotor unbalance

This paper investigates both theoretically and experimentally the effect of the location and number of sensors and magnetic bearing actuators on both global and local vibration reduction along a rotor using a feedforward control scheme. Theoretical approaches developed for the active control of beams have been shown to be useful as simplified models for the rotor scenario. This paper also introduces the time-domain LMS feedforward control strategy, used widely in the active control of sound and vibration, as an alternative control methodology to the frequency-domain feedforward approaches commonly presented in the literature. Results are presented showing that for any case where the same number of actuators and error sensors are used there can be frequencies at which large increases in vibration away from the error sensors can occur. It is also shown that using a larger number of error sensors than actuators results in better global reduction of vibration but decreased local reduction. Overall, the study demonstrated that an analysis of actuator and sensor locations when feedforward control schemes are used is necessary to ensure that harmful increased vibrations do not occur at frequencies away from rotor-bearing natural frequencies or at points along the rotor not monitored by error sensors.

Tri-state single-phase integrated inverters with input to output power decoupling control

Researches on control for power electronics have looked for original solutions in order to advance renewable resources feasibility, specially the photovoltaic (PV). In this context, for PV renewable energy source the usage of compact, high efficiency, low cost and reliable converters are very attractive. In this context, two improved simplified converters, namely Tri-state Boost and Tri-state Buck-Boost integrated single-phase inverters, are achieved with the presented Tri-state modulation and control schemes, which guarantees the input to output power decoupling control. This feature enhances the field of single-phase PV inverters once the energy storage is mainly inductive. The main features of the proposal are confirmed with some simulations and experimental results. © 2012 IEEE.

Neural network based estimation of torque in induction motors for real-time applications

Induction motors are largely used in several industry sectors. The selection of an induction motor has still been inaccurate because in most of the cases the load behavior in its shaft is completely unknown. The proposal of this article is to use artificial neural networks for torque estimation with the purpose of best selecting the induction motors rather than conventional methods, which use classical identification techniques and mechanical load modeling. Since proposed approach estimates the torque behavior from the transient to the steady state, one of its main contributions is the potential to also be implemented in control schemes for real-time applications. Simulation results are also presented to validate the proposed approach.

Optimal capacitor placement in radial distribution networks

The capacitor placement (replacement) problem for radial distribution networks determines capacitor types, sizes, locations and control schemes. Optimal capacitor placement is a hard combinatorial problem that can be formulated as a mixed integer nonlinear program. Since this is a NP complete problem (Non Polynomial time) the solution approach uses a combinatorial search algorithm. The paper proposes a hybrid method drawn upon the Tabu Search approach, extended with features taken from other combinatorial approaches such as genetic algorithms and simulated annealing, and from practical heuristic approaches. The proposed method has been tested in a range of networks available in the literature with superior results regarding both quality and cost of solutions.

AATS for the X̄ Chart with Variable Parameters

A Fortran computer program is given for the computation of the adjusted average time to signal, or AATS, for adaptive X̄ charts with one, two, or all three design parameters variable: the sample size, n, the sampling interval, h, and the factor k used in determining the width of the action limits. The program calculates the threshold limit to switch the adaptive design parameters and also provides the in-control average time to signal, or ATS.

Artificial immune systems applied to optimal capacitor placement in radial distribution networks

The capacitor placement problem for radial distribution networks aims to determine capacitor types, sizes, locations and control scheme. This is a combinatorial problem that can be formulated as a mixed integer nonlinear program. The paper presents an algorithm inspired in artificial immune systems and developed for this specific problem. A good performance was obtained through experimental tests applied to known systems. © 2006 IEEE.

Estimation of electrical machine speed using sensorless technology and neural networks

The use of sensorless technologies is an increasing tendency on industrial drivers for electrical machines. The estimation of electrical and mechanical parameters involved with the electrical machine control is used very frequently in order to avoid measurement of all variables related to this process. The cost reduction may also be considered in industrial drivers, besides the increasing robustness of the system, as an advantage of the use of sensorless technologies. This work proposes the use of a recurrent artificial neural network to estimate the speed of induction motor for sensorless control schemes using one single current sensor. Simulation and experimental results are presented to validate the proposed approach. ©2008 IEEE.

Integrated single-stage converters with Tri-state modulation suitable for photovoltaic systems

The aim of this work is to present two topological simplified converters named Tri-state Boost and Tri-state Buck-Boost integrated single-phase inverters. An important operation capability can be achieved for these converters using a Tri-state Modulation control scheme. This is the inductive power decoupling and the independent input output control. These features are directly related with the photovoltaic micro-converter needs, improving efficiency, cost and mainly lifetime. These features for the proposed modulation are confirmed through experimental results. © 2011 IEEE.

Performance Comparisons of EWMA Control Chart Schemes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dynamics of inter-modality re-weighting during human postural control

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoring the process mean and variance using a synthetic control chart with two-stage testing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Historic of therapeutic efficacy of albendazol sulphoxide administered in different routes, dosages and treatment schemes, against Taenia saginata in cattle experimentally infected

The present study aimed to notify the history of albendazole sulphoxide (ALB-SO) and albendazole (ALBZ) efficacy against Taenia saginata cysticercus (Cysticercus bovis) parasitizing experimentally infected bovines. A total of 11 efficacy trials were performed between the years of 2002 and 2010. In order to perform these trials, animals were individually inoculated with 2 x 104 eggs of T. saginata in each study's day zero (DO). For every trial, a positive control group (untreated infected animals) and a negative control group (animals that were neither infected nor treated) were used. ALB-SO or ALB were administered in the different dosages, in different days of treatments. In a last study with this formulation, this active principle was administered orally, mixed with the mineral supplement, on the 60th DPI, in a dosage of 30 mg/kg. In all trials, on the 100th DPI, all animals were euthanized and submitted to the sequenced slicing of 26 anatomical segments (fragments of approximately five millimeters) for the survey of T. saginata cysticercus. With the obtained results it is possible to verify that in the first trials, conducted in 2002, ALB-SO reached, independently of dosage and treatment scheme, efficacies superior to 98% (arithmetic means). The trials conducted in 2005 (2.5 mg/kg on the 30th, 60th, and 90th DPI) obtained values of efficacy all inferior to 60%. In 2008, the trials with 2.5 and 7.7 mg/kg demonstrated efficacy values inferior to 40%, for both dosages and treatment schemes (30th/60th/90th DPI and 60th DPI). When this formulation was administered orally on the dosage of 30 mg/kg on the 60th DPI, the efficacy against T. saginata cysticercus reached 88.28%. ALB administered orally showed efficacy values of 0.0%, 29.88% and 28.64% in the dosages of 5, 10 and 15 mg/kg, respectively, using the treatment schemes described above for each dosage. Based on the results of these trials, conducted in an eight year period (2002-2010) using the sequenced slicing method for evaluating the efficacy of the aforementioned formulations against T. saginata cysticercus, it is possible to observe that, amongst the few molecules used in the chemotherapic treatment against T. saginata larvae, ALB-SO, administered in varied routes, dosages and treatment schemes, the studies conducted in 2008, 2009, and 2010, have a low therapeutic efficacy against C bovis in Brazil, while ALBZ had insignificant efficacy values against T. saginata larvae parasitizing experimentally infected bovines. However, future studies using molecular biology will be necessary to assess whether the difference on the efficacy of the ALB-SO can be related to strain or another specific factor. (C) 2013 Elsevier Inc. All rights reserved.

Double-objective economic statistical design of the VP T-2 control chart: Wald's identity approach

Research has shown that applying the T-2 control chart by using a variable parameters (VP) scheme yields rapid detection of out-of-control states. In this paper, the problem of economic statistical design of the VP T-2 control chart is considered as a double-objective minimization problem with the statistical objective being the adjusted average time to signal and the economic objective being expected cost per hour. We then find the Pareto-optimal designs in which the two objectives are met simultaneously by using a multi-objective genetic algorithm. Through an illustrative example, we show that relatively large benefits can be achieved by applying the VP scheme when compared with usual schemes, and in addition, the multi-objective approach provides the user with designs that are flexible and adaptive.

Effects of Haematobia irritans infestation on weight gain of Nelore calves assessed with different antiparasitic treatment schemes

Effects of Haematobia irritans infestation on weight gain of 18 to 20 months old non-castrated Nelore calves, were investigated, under field conditions, using different antiparasitic treatments. Sixty animals were divided in three groups, with 20 bovines each: T01 (untreated control); T02 (treated with Cypermethrin 15 g + Chlorpyriphos 25 g + Citronellal 1 g, as a whole body spray, on days 0,30, 60, 90 and 120 post-treatment); and T03 (treated on day zero with an ear tag impregnated with Diazinon 6 g on the left ear). Counts of H. irritans were conducted on day 30, 60, 90, 120 and 150 post-treatment (DPT). On the same experimental dates, animals were individually weighed, seeking to evaluate the effects of parasitism on the development of animals in each group. From this study it is concluded that T03 had significantly higher efficacy (>90%, till 90 DPT), based on H. irritans fly counts, compared to T02 which showed little or no effect. At the specific conditions of the present study, an average of approximately 90 flies (mean difference of flycounts between groups T01 and T03) was associated with a difference of 20 kg/animal in 150 days. (C) 2014 Elsevier B.V. All rights reserved.