Injeção subaracnóidea inadvertida de corticoíde em tratamento de dor crônica da coluna lombar. Relato de caso

BACKGROUND AND OBJECTIVES: Before epídural steroids were used in chronic lumbar pain, subarachnoid injection of these agents was the treatment of choice. Although still preconized by some authors, this technique may lead to severe complications with neurological sequelae. This report aimed at describing a case of accidental subarachnoid injection of steroid associated to local anesthetics during epidural puncture to treat lumbar pain. CASE REPORT: Male patient, 46 years old, followed byneuro-surgery for presenting right sciatic pain for 9 month, refractory to clinical treatment due to L 4-L 5 disk protrusion confirmed by CT scan, without neurological deficit. Epidural puncture for pain treatment was performed in L 4-L 5 with 17G needle and 10 mL solution were injected containing 4 mL of 0.25% bupivacaine, 80 mg methylprednisolone and 4 mL of 0.9% saline. Although there has not been CSF reflux, 5 minutes after injection there were sensory block in T 4 and motor block in T 6, associated to blood pressure and heart rate decrease. CONCLUSIONS: Accidental subarachnoid injections with the association of steroids for pain relief may cause adverse effects. There are several risks, varying from mild transient symptoms to nervous injuries, including spinal cord injuries. Our patient had no sequelae from the accidental subarachnoid injection, probably because it has been a single injection.

Injeção inadvertida de metoclopramida no espaço subaracnóideo: relato de caso

JUSTIFICATIVA E OBJETIVOS: Injeção inadvertida de medicamentos de uso não espinhal nos espaços peridural e subaracnóideo é uma complicação anestésica passível de ocorrer. Este relato apresenta um caso de injeção inadvertida de metoclopramida no espaço subaracnóideo. RELATO do CASO: Paciente do sexo feminino, 17 anos, 69 kg, IMC de 26.2, estado físico ASA I, 36 semanas e 4 dias de gestação, com diagnóstico de sofrimento fetal agudo, e indicação de cesariana. Apresentava freqüência cardíaca de 82 bpm, pressão arterial de 130 x 70 mmHg, SpO2 de 97%, ritmo cardíaco sinusal regular. A anestesia foi por via subaracnóidea com a associação de anestésico local e opióide, 15 mg de bupivacaína hiperbárica a 0,5% e 25 µg de fentanil. Após 5 minutos da instalação do bloqueio, a paciente referiu mal estar inespecífico. Aferidas pressão arterial, 190 x 120 mmHg, freqüência cardíaca, 145 bpm, e SpO2, 95%. Verificando-se as ampolas cujos conteúdos foram administrados encontrou-se uma de bupivacaína e uma de metoclopramida. O quadro se apresentou com cefaléia frontal intensa, visão turva, náuseas, vômitos e agitação inicial, que evoluiu para sonolência e torpor, além de hipertensão arterial e taquicardia. Foram administrados tramadol, dipirona, ondansetron e medidas de suporte. Após 30 minutos, a paciente apresentava-se assintomática, com PA de 150 x 100 mmHg e FC de 120 bpm. Recebeu alta para a enfermaria 140 minutos após permanência na SRPA, com total reversão dos bloqueios motor, sensitivo e autonômico, e normalização dos parâmetros hemodinâmicos. Recebeu alta hospitalar 48 horas após, sem apresentar seqüelas neurológicas, juntamente com o recém-nascido. CONCLUSÕES: Máxima atenção deve ser dada a qualquer medicamento administrado, seja qual for à via utilizada. Padronização de cores de ampolas, e dos locais de depósito, com o intuito de diminuir este tipo de acidente é recomendável.

Intra-prostatic injection of botulinum toxin type A in treatment of dogs with spontaneous benign prostatic hyperplasia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da administração subaracnóidea de grandes volumes de lidocaína a 2% e ropivacaína a 1% sobre a medula espinhal e as meninges: estudo experimental em cães

JUSTIFICATIVA E OBJETIVOS: A injeção de grandes volumes de anestésico local no espaço subaracnóideo, após punção dural acidental, é complicação da anestesia peridural. O objetivo desta pesquisa foi investigar as possíveis alterações clínicas e histológicas desencadeadas por grandes volumes de lidocaína a 2% e ropivacaína a 1%, simulando injeção subaracnóidea acidental, em cães. MÉTODO: Vinte e um cães foram distribuídos aleatoriamente em 3 grupos, que receberam por via subaracnóidea: G1 - cloreto de sódio a 0,9%; G2 - lidocaína a 2% e G3 - ropivacaína a 1%. A punção subaracnóidea foi realizada no espaço intervertebral L6-L7. O volume de anestésico local administrado foi de 1 ml para cada 10 cm de distância entre a protuberância occipital e o espaço lombossacral (5 - 6,6 ml). Após 72 horas de observação clínica os animais foram sacrificados e foi removida a porção lombossacral da medula para exame histológico, por microscopia óptica. RESULTADOS: Nenhum animal do G1 apresentou alterações clínicas ou histológicas da medula espinhal. Foram observados dois casos de necrose do tecido nervoso em G2, porém mudanças clínicas, em somente um desses cães e em outros dois animais que não apresentaram alterações histológicas. Foi encontrada necrose focal do tecido nervoso medular em um animal de G3. Todos os animais de G3 permaneceram clinicamente normais. CONCLUSÕES: Conclui-se que grandes volumes de lidocaína a 2% determinaram alterações clínicas e histológicas mais intensas que os de ropivacaína a 1%.

Injeção intravascular acidental de ropivacaína a 0,5% durante a realização de anestesia peridural torácica: relato de casos

JUSTIFICATIVA E OBJETIVOS: A ropivacaína foi introduzida na prática clínica há pouco mais de dez anos, associando-se a baixo risco de complicações do sistema nervoso central e cardiovascular. O objetivo destes relatos é apresentar um caso de parada cardíaca e outro de toxicidade neurológica, após injeção intravascular acidental da ropivacaína, durante a realização de anestesias peridurais. RELATO DOS CASOS: Trata-se de duas pacientes submetidas a cirurgias plásticas estéticas sob anestesia peridural torácica com ropivacaína a 0,5%. Durante a realização da técnica, uma delas apresentou parada cardíaca em assistolia e a outra, toxicidade neurológica. Prontamente atendidas, ambas apresentaram rápida recuperação, tendo sido possível a realização dos respectivos atos cirúrgicos. CONCLUSÕES: O reconhecimento e o tratamento rápidos da injeção intravascular acidental, bem como as características farmacológicas da ropivacaína foram decisivos, em ambos os casos, na boa recuperação das pacientes.

Accidental swallowing of orthodontic expansion appliance key

Ingestion of a foreign object, including a dental object, can lead to a trip to the emergency room. This article describes the accidental swallowing of a key that was used to activate a rapid maxillary expander. An orthodontic patient swallowed the key while trying to activate the appliance at home. The object's trajectory was followed on radiographs until it was eliminated. Possible clinical complications, legal implications of this situation, and practices for prevention are described. (Am J Orthod Dentofacial Orthop 2011;140:266-8)

Comparison of anesthetic efficacy and adverse effects associated with peribulbar injection of ropivacaine performed with and without ultrasound guidance in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flow-injection spectrophotometric determination of dipyrone in pharmaceutical formulations using ammonium molybdate as chromogenic reagent

A simple and rapid flow-injection spectrophotometric method is reported for the determination of dipyrone in pharmaceutical formulations. The method is based on the reaction of dipyrone with ammonium molybdate in acidic medium to produce blue molybdenum, which was detected spectrophotometrically at 620 nm. The analyte was determined in a single-line flow system. The calibration curve obtained was linear in the range of 5x10(-4) to 8x10(-3) mol L-1 for dipyrone concentration and the precision ( s r =1.7%) was satisfactory. The method proved to be selective and adequately sensitive. Application of the method to the analysis of pharmaceutical samples resulted in excellent accuracy; the percent mean recoveries were in the range 95.3%-101% and relative errors less than 5.0% for five pharmaceutical formulations were found.

Intravitreal injection versus sub-Tenon's infusion of triamcinolone acetonide for refractory diabetic macular edema: A randomized clinical trial

PURPOSE. To compare the effectiveness of posterior sub-Tenon's infusion (STi) and intravitreal injection (IVI) of triamcinolone acetonide (TA) for treatment of refractory diffuse diabetic macular edema.METHODS. Thirty-six phakic diabetic patients with refractory diffuse diabetic macular edema were prospectively enrolled. Patients randomly received either 40 mg STi or 4 mg IVI of TA. Comprehensive ophthalmic evaluation was performed at baseline and 1, 2, 4, 8 +/- 1, 12 +/- 2 and 24 +/- 2 weeks after treatment. Macular morphologic changes detected by optical coherence tomography and visual acuity, intraocular pressure, and lens status were evaluated.RESULTS. Twenty-eight patients (28 eyes) completed the 24-week study. Central macular thickness was significantly reduced in the IVI group when compared with the STi group at 2, 4, 8, 12, and 24 weeks after treatment (P < 0.01). Mean visual acuities (in logarithm of the minimum angle of resolution [logMAR]) at week-4, -8, and -12 follow-up examinations were significantly higher in the IVI group (0.74, 0.75, and 0.82, respectively) when compared with the STi group (0.88, 0.88, and 0.90, respectively; P < 0.01). A significant change from baseline in mean intraocular pressure (mm Hg) was seen at weeks 4 (+/- 3.21) and 8 (+/- 3.35) in STi the group (P < 0.01), and at week 8 (+/- 2.78) in the IVI group (P < 0.05). No patient had cataract progression during the study.CONCLUSIONS. Although the number of patients and length of follow-up in this preliminary study were limited, the changes in central macular thickness and visual acuity observed after treatment suggest that IVI TA may be more effective than STi for the management of refractory diffuse diabetic macular edema. Further studies are needed to confirm these preliminary findings.

Ovário-histerectomia vídeo-assistida com único portal em cadelas: estudo retrospectivo de 20 casos

O objetivo do presente estudo foi avaliar retrospectivamente as 20 primeiras ovário-histerectomias vídeo-assistidas com único portal (SPVA-OSH), realizadas por um cirurgião não proficiente nessa técnica. Vinte cadelas foram submetidas à laparoscopia para SPVA-OSH, com o auxílio de um endoscópio de 10mm, com canal de trabalho de 5mm, inserido por um trocarte, posicionado na região pré-púbica, e coagulação bipolar. O tempo cirúrgico médio foi de 22,95±5,17 minutos. Os cinco primeiros procedimentos consumiram mais tempo cirúrgico do que os demais. A abordagem aos pedículos ovarianos direito e esquerdo foram as etapas que apresentaram maior tempo de execução. Houve complicação leve ou moderada em seis (30%) das 20 cadelas operadas. As complicações foram: hemorragia leve ou moderada em um dos pedículos ovarianos em quatro (20%) cadelas e hemorragia grave, devido à punção do baço com agulha de Veress em dois (10%) animais. A SPVA-OSH foi realizada em cadelas por um cirurgião no início da curva de aprendizado, sem complicações maiores.

Effect of heat stress or lipopolysaccharide (E-coli) injection on HSP70 levels in the liver and brain of adrenalectomized rats

Hsp70 content (ng Hsp70 mu g total protein(-1)) in the liver and brain of control and adrenalectomized male rats was investigated by Western Blotting after heat stress (40 degrees C) or endotoxin-induced fever (E. coli lipopolysaccharide injection). The increase in rectal temperature was higher after heat stress than after LPS injection, Heat stress affected Hsp70 content of the liver, but not of the brain; however adrenalectomy did not influence any parameter. These results suggest that, under these circumstances, there is no relationship between the hypothalamic-pituitary-adrenal axis and Hsp70 synthesis in liver and brain. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Production of reinforced composites with natural fibers for industrial applications - Extrusion and injection WPC

The aim of this work is to study the replacement of currently used thermoplastics by composites reinforced with vegetable fibers with several advantages, mainly better mechanical properties, low weight and competitive cost compared to its counterparts. Extrusion and injection molding processes were studied using polypropylene (PP) matrix. The raw materials used were sugar cane bagasse, elephant grass, wood, milk cartons and recycled polypropylene. The composites were tested for bending, tension, hardness and impact resistance, following ASTM standards. The results obtained were extremely positive since they proved that natural fibers as reinforcement can be an important alternative to replace talc and other fillers.

State-of-the-art for extrusion and injection moulding FPC: natural Fibre Plastics Composites in Brazil

Environmental and economical concerns are stimulating research of new materials for construction, furniture, packaging and automotive industries. Particularly attractive are the new materials. This paper presents results about the properties of composites of polyhydroxybutyrate (PHB), polypropylene (PP) and High Density Polyethylene (HDPE) reinforced with natural fibres. The composites were prepared through the extrusion with natural fibres, in an ratio of 30% by weight. The quality of samples was tested utilising injection moulded samples, according to ASTM standards. Results showed that natural fibres can act as an excellent reinforcing material, resulting in low cost composites and improving economical and ecological interests.

Electrical properties of polymer/metal interface in polymer light-emitting devices: electron injection barrier suppression

The electrical characterization of a high efficient multilayer polymer light emitting diode using poly[(2-methoxy-5-hexyloxy)-p-phenylenevinylene] as the emissive layer and an anionic fluorinated surfactant as the electron transport layer was performed. For the sake of comparison, a conventional single layer device was fabricated. The density current vs. voltage measurements revealed that the conventional device has a higher threshold voltage and lower current compared to the surfactant modified device. The effective barrier height for electron injection was suppressed. The influence of the interfaces and bulk contributions to the dc and high frequencies conductivities of the devices was also discussed. (c) 2006 Springer Science + Business Media, Inc.

Effect of ion concentration of ionomer in electron injection layer of polymer light-emitting devices

Polymer light-emitting devices (PLEDs) with poly(2-methoxy-5-hexyloxy)-p-phenylenevinylene (OC1OC6-PPV) as the emissive layer were studied with an electron injection layer of ionomers consisting of copolymers of styrene and methylmethacrylate (PS/PMMA) with 3, 6 and 8 mol% degree of sulfonation. The ionomers were able to form very thin films over the emissive layer, with less than 30 nm. Additionally, the presence of ion pairs of ionomer suppresses the tendency toward dewetting of the thin film of ionomer (similar to 10 nm) which can cause malfunction of the device. The effect of the ionomers was investigated as a function of the ion content. The devices performance, characterized by their current density and luminance intensity versus voltage, showed a remarkable increase with the ionomer layer up to 6 mol% of ionic groups, decreasing after that for the 8 mol% ionomer device. The study of the impedance spectroscopy in the frequency range from 0.1 to 10(6) Hz showed that the injection phenomena dominate over the transport in the electroluminescent polymer bulk. (c) 2006 Elsevier B.V. All rights reserved.