Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan

This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.

Comparative Analysis of Objective Distortion Measures for Speech Signals Degraded by Noise

Speech signals degraded by additive noise can affects different applications in telecommunication. The noise may degrades the intelligibility of the speech signals and its waveforms as well. In some applications such as speech coding, both intelligibility and waveform quality are important but only intelligibility has been focused lastly. So, modern speech quality measurement techniques such as PESQ (Perceptual Evaluation of Speech Quality) have been used and classical distortion measurement techniques such as Cepstral Distance are becoming unused. In this paper it is shown that some classical distortion measures are still important in applications where speech corrupted by additive noise has to be evaluated.

Mechanical comparative analysis of three different types of sutures in different dimensions tendons: experimental study

O objetivo da presente investigação experimental foi avaliar o perfil mecânico de três tipos de técnicas de sutura entre tendões de dimensões diferentes. Foram utilizados 21 cães sem raça definida (11machos/10 fêmeas), dos quais foram obtidos os tendões flexor comum dos dedos - t.c. (maior dimensão) e tibial cranial - t.cr. (menor dimensão), de ambos os membros pélvicos. Logo após a obtenção das peças foi realizada sutura, segundo cada tipo de técnica, porém sempre com o mesmo número de pontos. Os tendões utilizados para sutura foram sempre do lado direito e o controle do lado esquerdo (t.cr.). Após a sutura, os corpos de prova foram fixados em garras especialmente desenvolvidas e submetidos a ensaio de tração axial à velocidade de 30mm/minuto. Após o ensaio o programa da máquina forneceu os valores da carga máxima ( na ruptura) e deformação absoluta (mm) e relativa (%), além do diagrama carga-deformação. Os resultados foram submetidos a estudo estatístico pela análise de medidas repetidas no nível de 5% de significância. Não foi constatada diferença estatisticamente significativa nos parâmetros mecânicos avaliados nos três grupos de técnicas de suturas. em relação ao controle (tendão de menos diâmetro contra-lateral), observou-se que a sutura apresenta resistência máxima a tração significativamente menor que o controle e maior deformação.

Comparative Analysis of 2-Flap Designs for Extraction of Mandibular Third Molar

Objective: The objective of the study was to analyze 2-flap designs for surgical extraction of third molar, evaluating the periodontal status of the second lower molar.Study Design: Forty-five lower third molars were extracted from 24 patients. In 23 teeth, a vertical incision to the mandibular ramus was used (technique A), whereas 22 teeth were submitted to classic L-shaped flap (technique B) with controls at 60 and 90 days postoperatively.Results: Pearson correlation coefficient analysis showed a significant correlation only between immediate preoperative probing depth variables from techniques A and B in the studied surfaces. Statistical significances in the preoperative (vestibular) and postoperative day 60 (distovestibular and vestibular) were noted. In contrast, Student t-test showed no statistical difference in probing depths between preoperative and postoperative values, as well as no statistically significant difference regarding the type of incision alone.Conclusions: Technique A allowed a less traumatic surgery, guaranteeing a more comfortable postoperative period.

Comparative analysis of root surface smear layer removal by different etching modalities or erbium:yttrium-aluminum-garnet laser irradiation. A scanning electron microscopy study

The purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mu m) irradiation on the removal of root surface smear layer of extracted human teeth and to compare its efficacy with that of citric acid, ethylenediamine tetra-acetic acid (EDTA), or a gel containing a mixture of tetracycline hydrochloride (HCl) and citric acid, using scanning electron microscopy (SEM). Thirty human dentin specimens were randomly divided into six groups: G1 (control group), irrigated with 10 ml of physiologic saline solution; G2, conditioned with 24% citric acid gel; G3, conditioned with 24% EDTA gel; G4, conditioned with a 50% citric acid and tetracycline gel; G5, irradiated with Er:YAG laser (47 mJ/10 Hz/5.8 J/cm(2)/pulse); G6, irradiated with Er:YAG laser (83 mJ/10 Hz/10.3 J/cm(2)/pulse). Electron micrographs were obtained and analyzed according to a rating system. Statistical analysis was conducted with Kruskal-Wallis and Mann-Whitney tests (P < 0.05). G1 was statistically different from all the other groups; no statistically significant differences were observed between the Er:YAG laser groups and those undergoing the other treatment modalities. When the two Er:YAG laser groups were compared, the fluency of G6 was statistically more effective in smear layer removal than the one used in G5 (Mann-Whitney test, P < 0.01). Root surfaces irradiated by Er:YAG laser had more irregular contours than those treated by chemical agents. It can be concluded that all treatment modalities were effective in smear layer removal. The results of our study suggest that the Er:YAG laser can be safely used to condition diseased root surfaces effectively. Furthermore, the effect of Er:YAG laser irradiation on root surfaces should be evaluated in vivo so that its potential to enhance the healing of periodontal tissues can be assessed.

Use of bovine bone graft and bone membrane in defects surgically created in the cranial vault of rabbits. Histologic comparative analysis

Purpose: This study was proposed to analyze histologically the process of repairing bone defects created surgically in the cranial vaults of rabbits. Materials and Methods: Thirty adult male rabbits (Oryctolagus cunilicus) received, under general anesthesia, bilateral parietal osteotomies by means of a 6mm-diameter trephine. The bony defects were divided into 4 groups. In group 1 the defect did not receive any treatment; in group 2 the defect was filled with lyophilized bovine bone (Biograft); in group 3 it was filled with bovine bone and covered with a bone matrix membrane (Bioplate); in group 4 it was covered with a bone matrix membrane. Animals were sacrificed in 3 equal groups at 15, 30, and 60 days. The specimens were subjected to routine laboratory procedures to evaluate the degree of bone repair. Results: After 60 days, new bone formation in group 2 was not satisfactory when compared to that of group 3. Large amounts of new bone formation in maturation were seen in group 3. In the defects covered with a membrane the results were similar to those of group 1 (ie, the cavity was filled with fibrous connective tissue). The implanted bone and membranes were totally resorbed. Discussion and Conclusions: the use of a membrane served as a barrier against the migration of cells from the adjacent tissue and the bone graft/membrane preserved the cavity space, resulting in an enhanced osteogenic effect.

Comparative analysis of morphological, structural and morphometric patterns of Polistes versicolor (Olivier) (Hymenoptera: Vespidae) hypopharyngeal glands

O presente estudo descreve, por meio de técnicas de histologia e ultramorfologia, os padrões morfológico e estrutural das glândulas hipofaríngeas de Polistes versicolor (Olivier), comparando-os aos de outros grupos de Hymenoptera. Além disso, analisa a presença de variações intraespecíficas dessas glândulas por meio de análises morfométricas das células secretoras de vespas em diferentes idades. Na espécie estudada foi constatada a presença de glândulas com características primitivas, possuindo células secretoras que desembocam individualmente na placa hipofaríngea. O padrão morfológico encontrado nas glândulas hipofaríngeas foi basicamente o mesmo para todas as vespas estudadas, entretanto o comprimento das células glandulares apresentou variações significativas entre indivíduos. Aparentemente essas variações não estão relacionadas com a idade.

Cytogenetics of four Omophoita species (Coleoptera, Chrysomelidae, Alticinae): A comparative analysis using mitotic and meiotic cells submitted to the standard staining and C-banding technique

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparative analysis of microsatellite variability in five macaw species (Psittaciformes, Psittacidae): application for conservation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Proventriculus of Cephalotes ants: A structural and comparative analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis of heteropyknotic chromatin and silver-stained material in Platycarenus umbractulatus (Pentatomidae: Discocephalinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative analysis of the testes and spermatogenesis in species of the family Pentatomidae (Heteroptera)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative analysis of cell proliferation ratio in oral lichen planus, epithelial dysplasia and oral squamous cell carcinoma

Background: Although oral lichen planus has been classified by the World Health Organization (WHO) as a potentially malignant disorder, such classification is still the target of much controversy. Aim: To evaluate the cell proliferation rate in oral lichen planus, comparing it to the rate observed in epithelial dysplasia and oral squamous cell carcinoma, aiming at indications which might indicate the potential for malignant transformation. Material and Methods: Twenty-four cases of each lesion were submitted to the streptoavidin-biotin and AgNOR technique to evaluate the immunohistochemical expression of PCNA and the mean NORs/ nucleus, respectively. Results: Positivity for PCNA was observed in 58.33% of oral lichen planus cases, 83.33% of epithelial dysplasia cases and 91.67% of oral squamous cell carcinoma cases. Chi-squared test showed that the number of positive cases for PCNA was significantly lower in oral lichen planus than in oral squamous cell carcinoma (p<0.05). No significant statistical difference between oral lichen planus and epithelial dysplasia (p>0.05) and between the epithelial dysplasia and oral squamous cell carcinoma (p>0.05) was observed. The mean NORs/ nucleus in oral lichen planus, epithelial dysplasia and oral squamous cell carcinoma were 1.74 +/- 0.32, 2.42 +/- 0.62 e 2.41 +/- 0.61, respectively. Variance analysis (ANOVA) revealed significant statistical difference between oral lichen planus and the other studied lesions (p<0.05). Conclusion: Oral lichen planus cell proliferation rate was less than in oral epithelial dysplasia and oral squamous cell carcinoma which might explain the lower malignant transformation rate.

Comparative analysis of the expression of proliferating cell nuclear antigen, p53, bax, and bcl-2 in oral lichen planus and oral squamous cell carcinoma

Several epidermiologic studies have shown the malignant transformation potential of oral lichen planus; however, this potential is subject of much controversy. To evaluate the expression of proteins related to the cell proliferation and apoptosis processes in oral lichen planus, we compared oral lichen planus with oral squamous cell carcinoma. Twenty-four cases of each lesion were submitted according to streptavidin-biotin technique to evaluate the immunohistochemical expression of proliferating cell nuclear antigen, p53, bax, and bcl-2 proteins. X 2 test showed no statistically significant differences between the expression of p53, bax, and bcl-2 in oral lichen planus and oral squamous cell carcinoma (P > .05). However, the expression of proliferating cell nuclear antigen was significantly lower in oral lichen planus than in oral squamous cell carcinoma (P < .05). No statistically significant differences between the expression of p53, bax, and bcl-2 in oral lichen planus and oral squamous cell carcinoma were observed, which may be an evidence of the potential of malignant transformation of oral lichen planus. (C) 2009 Elsevier B.V. All rights reserved.

Machined and plastic copings in three-element prostheses with different types of implant-abutment joints: a strain gauge comparative analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)