Estudo de caso de dois acidentes do trabalho investigados com o método de árvore de causas

São apresentados dois acidentes do trabalho típicos, ocorridos em empresa de grande porte, investigados com o Método de Árvore de Causas ­ ADC, método que permite identificar o papel desempenhado por fatores gerenciais e de organização do trabalho no desencadeamento desses fenômenos. Os casos apresentados revelam a participação, na gênese dos acidentes, de fatores como designação temporária e improvisada de trabalhadores para funções e postos de trabalho, execução de tarefas deixadas à iniciativa e ao arbítrio dos trabalhadores, falta de ferramentas e de materiais apropriados à execução de tarefas e falhas na circulação de informações, entre outros. São também analisadas as indicações para o uso do método, suas potencialidades em termos de prevenção, bem como as implicações decorrentes de dificuldades de aplicação, de necessidades de treinamento e reciclagens e do dispêndio elevado de tempo para investigação de cada acidente.

HACCP plan proposal for a typical Brazilian peanut processing company

Peanuts are likely to be infested by fungi with consequent contamination by aflatoxin in post-harvest industries. A hazard analysis critical control point (HACCP) plan is proposed for a typical Brazilian post-harvest industry from raw in-shell reception to the unpeeled peanuts transportation. Codex Alimentarius Commission guidelines were followed, with four critical control points (CCP) for aflatoxin being identified. The process steps with highest probability of aflatoxin occurrence (risk) are the in-shell reception, the dried in-shell storage, and the unpeeled kernel storage. During the storage steps there is a lack of control of air moisture and temperature. Therefore, there is no option but to keep rigid monitoring and control over each CCP, and detour lots with high aflatoxin levels to either oil or seed production. Attempts to correlate the aflatoxin levels with the rainfall showed an irregular trend of the toxin level. (c) 2008 Elsevier Ltd. All rights reserved.

Anthropotechnological analysis of industrial accidents in Brazil

The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s,without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, apposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. on the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows:the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise).

A statistical analysis of loss factor to determine the energy losses

Given that the total amount of losses in a distribution system is known, with a reliable methodology for the technical loss calculation, the non-technical losses can be obtained by subtraction. A usual method of calculation technical losses in the electric utilities uses two important factors: load factor and the loss factor. The load factor is usually obtained with energy and demand measurements, whereas, to compute the loss factor it is necessary the learning of demand and energy loss, which are not, in general, prone of direct measurements. In this work, a statistical analysis of this relationship using the curves of a sampling of consumers in a specific company is presented. These curves will be summarized in different bands of coefficient k. Then, it will be possible determine where each group of consumer has its major concentration of points. ©2008 IEEE.

Economical analysis of ethanol steam reformer for hydrogen production associated with a sugarcane industry

An expressive amount of produced hydrogen is generated by customers in-situ such as petrochemical, fertilizer and sugarcane industries. However, the most utilized feedstock is natural gas, a non-renewable and fossil fuel. The introduction of biohydrogen production process associated in a sugarcane industry is an alternative to diminish emissions and contribute to create a CO2 cycle, where the plants capture this gas by photosynthesis process and produces sucrose for ethanol production. The cost of production of ethanol has dramatically decreased (from about US$ 700/m3 in 1970s to US$ 200/m3 today), becoming this a good option at near term, inclusively for its utilization by customers localized in main regions (localized especially in regions such as Southeastern Brazil) Also in near future, it will possible the utilization of fuel cells as form of distributed generation. Its utilization could occur specially in peak hours, diminishing the cost of investments in newer transmission systems. A technical and economic analysis of steam reformer of ethanol to hydrogen production associated with sugarcane industry was recently performed. This technique will also allow the use of ethanol when its price is relatively low. This study was based on a previous R&D study (sponsored by CEMIG - State of Minas Gerais Electricity Company) where thermodynamic and economic analyses were developed, based in the development of two ethanol steam reformers prototypes.x In this study an analysis was performed considering the use of bagasse as source of heat in the steam reforming process. Its use could to diminish the costs of hydrogen production, especially at large scale, obtaining cost-competitive production and permitting that sugarcane industry produces hydrogen in large scale beyond ethylic alcohol, anhydrous alcohol (or ethanol) and sugar.

Analysis of inventory management in small business auto parts

The objective of this study was to analyze the production process and supply control in order to identify possible gaps and develop a method for managing supplies. The relevance of this research is on the benefits that can obtain by identifying the problems of supply control. The research method used was the case study, which was grounded on tripod semi-structured interviews, on-site observation, and document analysis. This methodology was very suitable because it can be analyzed and cross checked. The possibility of implementation of the proposal obtained from the theoretical framework, that together with the complementary actions suggested here, offers the opportunity to make the process more productive and profitable. This work allowed one to observe the weaknesses in managing the supply chain and at what points to work should be improved. It allowed to use some scientific models in the company object of study in order to improve supply management. © 2011 IEEE.

Some remarks on bifurcation analysis of a nonlinear vibrating system excited by a shape memory alloy material (SMA)

In this paper, the dynamical response of a coupled oscillator is investigated, taking in consideration the nonlinear behavior of a SMA spring coupling the two oscillators. Due to the nonlinear coupling terms, the system exhibits both regular and chaotic motions. The Poincaré sections for different sets of coupling parameters are verified. © 2011 World Scientific Publishing Company.

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use. © 2013 Elsevier B.V. All rights reserved.

A Time-domain Harmonic Power-Flow Analysis in Electrical Energy Distribution Networks, Using Norton Models for Non-linear Loading

The purpose of this paper is to present the application of a three-phase harmonic propagation analysis time-domain tool, using the Norton model to approach the modeling of non-linear loads, making the harmonics currents flow more appropriate to the operation analysis and to the influence of mitigation elements analysis. This software makes it possible to obtain results closer to the real distribution network, considering voltages unbalances, currents imbalances and the application of mitigation elements for harmonic distortions. In this scenario, a real case study with network data and equipments connected to the network will be presented, as well as the modeling of non-linear loads based on real data obtained from some PCCs (Points of Common Coupling) of interests for a distribution company.

An analysis of embeddedness in the value creation in interorganisational networks: an illustrative example in Brazil

The purpose of this article is to propose a methodological approach to analyse how the positioning of actors in an interorganisational network can influence the elements of value creation. This study fills a gap in the existing literature by exploring the relationship between the positioning of actors and the value creation in a context of interorganisational networks. The case study method was employed and the data was obtained from four companies of an interorganisational network, located in Brazil, which produces earthmoving equipments. The central actor in this network is benefited through access to resources, power and information of the other network actors. The centrality position seems to help this company in the absorption and diffusion of knowledge among the other network actors. The research indicates, that a dense core (through strong ties) and redundancy (for triangulation and knowledge absorption), benefited the following value creation elements: tangible; intangible; services and economic.