Histomorphometric evaluation of periodontal compression and tension sides during orthodontic tooth movement in rats

OBJECTIVE: The purpose of this study was to evaluate the thickness of the periodontal ligament of rat molars during orthodontic tooth movement (OTM). METHODS: Thirty Wistar rats were divided into three groups of 10 animals each: GI, GII and GIII and the mice were euthanized at 7, 14 and 21 days, respectively. Experimental subjects were compared to their respective controls by the Mann-Whitney test. Comparison of values between compression and tension sides were performed during the same and different time periods through Analysis of Variance (ANOVA), Kruskal-Wallis test and, subsequently, Tukey's test. RESULTS: Groups GI and GII showed decreased PDL size in the apical regions of the mesiobuccal root and in the cervical region of the distobuccal root. There was also an increased PDL in the cervical regions of the mesiobuccal root, apical region of the distobuccal root and middle region of both roots. CONCLUSION: The reduction and increase in PDL size were seen in the same root, which characterizes tooth inclination. The apical, middle and cervical regions were compared with one another in each time period and at three times: 7, 14 and 21 days. They were also compared in each region, confirming a tipping movement in GI and GII and a gradual decreased intensity between GI to GII, reaching normal dimension in GIII.

Combined effect of the finasteride and doxazosin on rat ventral prostate morphology and physiology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Independent and Combined Effects of Physical Activity and Sedentary Behavior on Blood Pressure in Adolescents: Gender Differences in Two Cross-Sectional Studies

Objectives: To examine the independent and combined association of physical activity (PA) and sedentary behavior (SB) on both systolic (SBP) and diastolic blood pressure (DBP) in adolescents from two observational studies. Methods: Participants from two cross-sectional studies, one conducted in Europe (n = 3,308; HELENA study) and the other in Brazil (n = 991; BRACAH study), were selected by complex sampling. Systolic and diastolic blood pressure (outcomes), PA and SB, both independently and combined, and potential confounders were analyzed. Associations were examined by multilevel linear regression. Results: Performing the recommended amount of PA (≥60 min/d) attenuated the effect of SB on DBP in BRACAH study girls and in boys from both studies. In contrast, PA did not attenuate the effects of SB on the SBP of girls in the HELENA study. The combination of less than recommended levels of PA with 2-4 h/d of sedentary behavior was found to be associated with increased SBP in boys from both studies. Conclusions: Meeting current PA recommendations could mediate the association between SB and DBP in both sexes. In boys, the joint effect of low levels of PA and excessive sedentary activity increases SBP levels. Longitudinal studies are required to confirm these findings. © 2013 de Moraes et al.

Eradication of Salmonella Typhimurium in broiler chicks by combined use of P22 bacteriophage and probiotic

It has been reported that the phage therapy is effective in controlling the number of colony-forming unit (CFU) of Salmonella spp. in chicken gut. This paper describes the protective effect of phage and Lactobacilli administration on Salmonella infection in 1-day-old chicks. We administered the bacteriophage P22 in a single dose and a probiotic mixture of four species of bacteriocin-producing Lactobacillus once a day for one week. Samples were analyzed every 48 hours, and intestinal eradication of S. Typhimurium was confirmed after treatments. We observed an increase in the size of duodenal villi and cecal crypts, as well as an increase in body weight in groups that received daily doses of Lactobacilli. This study confirms the efficiency of bacteriophage therapy in controlling salmonellosis in chicks and the beneficial effect of Lactobacilli mixtures in the weight gain of the birds.

Combined effects of cyclosporin and nifedipine on gingival overgrowth in rats is not age dependent

Background: Cyclosporin A and nifedipine cause gingival overgrowth in rat, and the combined use of these drugs increases the overgrowth severity. Objective: The purpose of this study was to compare gingival overgrowth of rats of differents ages treated with cyclosporin A and nifedipine alone or given concurrently. Materials and methods: Rats 15, 30, 60 and 90 d old were treated with 10 mg/kg body weight of cyclosporin A and/or 50 mg/kg body weight of nifedipine in the chow. Results: Young rats showed evident gingival overgrowth with nifedipine, cyclosporin A, and cyclosporin A and nifedipine given concurrently. Adult rats did not show significant gingival alterations when treated with cyclosporin A and nifedipine alone. Nevertheless evident gingival overgrowth with alterations of the epithelium and connective tissue were observed when treated simultaneously with cyclosporin A and nifedipine. Conclusion: These results suggest that the combined effects of cyclosporin A and nifedipine on gingival overgrowth in rat is not age dependent.

The effect of locked screw angulation on the biomechanical properties of the S.P.S. Free-Block plate

Objectives: Among the locked internal fixators is one denominated S.P.S. (Synthesis Pengo System) Free-Block, which was designed with a locking ring that allows the screw to be locked and positioned obliquely. Due to the paucity of biomechanical studies on this system, the present work aimed to evaluate the influence of locked screw angulation on the resistance of the S.P.S. Free--Block plate. Methods: Forty synthetic bone cylinders with 10 mm fracture gap were used. Forty seven-hole 3.5 mm stainless steel plates (two AO-like dynamic compression holes and five locked holes) were assembled according to the orientation of the locked screws: mono cortical screws were positioned at 90° to the long axis of the cylinder (Group 1), and monocortical screws were positioned at 70° to its cylinder long axis (Group 2). In both groups, AO-like dynamic compression hole screws were positioned bicortically and neutrally. For each group, six specimens were tested until failure, three in bending and three in compression, to determine the loads for fatigue testing. Subsequently, for each group, 14 specimens were tested for failure --seven by bending and seven in compression. Results: No significant failure differences were observed between Groups 1 and 2 under static-loading or fatigue test. Clinical significance: In a fracture gap model the orientation of the locked monocortical screws did not show any influence on the mechanical performance of the S.P.S. Free-Block to tests of axial compression and four-point bending. © Schattauer 2013.

Phylogeography of endemic toads and post-Pliocene persistence of the Brazilian Atlantic Forest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Measured and modeled interactive effects of potassium deficiency and water deficit on gross primary productivity and light-use efficiency in Eucalyptus grandis plantations

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of water immersion and ultraviolet weathering on mechanical and viscoelastic properties of polyphenylene sulfide-carbon fiber composites

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Use of anatomical, chemical, and molecular genetic characteristics in the quality control of medicinal species: a case study of sarsaparilla (Smilax spp.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

Objectives. Evaluate the flexural strength (sigma) and subcritical crack growth (SCG) under cyclic loading of glass-infiltrated alumina-based (IA, In-Ceram Alumina) and zirconia-reinforced (IZ, In-Ceram Zirconia) ceramics, testing the hypothesis that wet environment influences the SCG of both ceramics when submitted to cyclic loading.Methods. Bar-shaped specimens of IA (n = 45) and IZ ( n = 45) were fabricated and loaded in three-point bending (3P) in 37 degrees C artificial saliva (IA(3P) and IZ(3P)) and cyclic fatigued (F) in dry (D) and wet (W) conditions (IA(FD), IA(FW), IZ(FD), IZ(FW)). The initial sigma and the number of cycles to fracture were obtained from 3P and F tests, respectively. Data was examined using Weibull statistics. The SCG behavior was described in terms of crack velocity as a function of maximum stress intensity factor (K(Imax)).Results. The Weibull moduli (m = 8) were similar for both ceramics. The characteristic strength (sigma(0)) of IA and IZ was and 466 MPa 550 MPa, respectively. The wet environment significantly increased the SCG of IZ, whereas a less evident effect was observed for IA. In general, both ceramics were prone to SCG, with crack propagation occurring at K(I) as low as 43-48% of their critical K(I). The highest sigma of IZ should lead to longer lifetimes for similar loading conditions.Significance. Water combined with cyclic loading causes pronounced SCG in IZ and IA materials. The lifetime of dental restorations based on these ceramics is expected to increase by reducing their direct exposure to wet conditions and/or by using high content zirconia ceramics with higher strength. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effect of the Single or Combined Administration of Cocaine and Testosterone on Cardiovascular Function and Baroreflex Activity in Unanesthetized Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the single or combined administration of cocaine and testosterone in autonomic and neuroendocrine responses to acute restraint stress

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of WC-17Co and WC-10Co-4Cr thermal spray coatings by HVOF on the fatigue and corrosion strength of AISI 4340 steel

It is known that chromium electroplating is related to the reduction in the fatigue strength of base metal. However, chromium results in protection against wear and corrosion combined with chemical resistance and good lubricity. Environmental requirements are an important point to be considered in the search for possible alternatives to hard chrome plating. Aircraft landing gear manufactures are considering WC thermal spray coating applied by the high-velocity oxygen-fuel (HVOF) process an alternative candidate, which shows performance at least comparable to results, obtained for hard chrome plating. The aim of this study is to compare the influence of WC-17Co and WC-10Co-4Cr coatings applied by HVOF process and hard chromium electroplating on the fatigue strength of AISI 4340 steel, with and without shot peening. S-N curves were obtained in axial fatigue test for base material, chromium plated and tungsten carbide coated specimens. Tungsten carbide thermal spray coating results in higher fatigue strength when compared to hard chromium electroplated. Shot peening prior to thermal spraying showed to be an excellent alternative to increase fatigue strength of AISI 4340 steel. Experimental data showed higher axial fatigue and corrosion resistance in salt fog exposure for samples WC-10Co-4Cr HVOF coated when compared with WC-17Co. Fracture surface analysis by scanning electron microscopy (SEM) indicated the existence of a uniform coverage of nearly all substrates. (C) 2004 Elsevier B.V. All rights reserved.

Design of concrete platforms offshore using the three-layer shell theory

The concrete offshore platforms, which are subjected a several loading combinations and, thus, requires an analysis more generic possible, can be designed using the concepts adopted to shell elements, but the resistance must be verify in particular cross-sections to shear forces. This work about design of shell elements will be make using the three-layer shell theory. The elements are subject to combined loading of membrane and plate, totalizing eight components of internal forces, which are three membrane forces, three moments (two out-of-plane bending moments and one in-plane, or torsion, moment) and two shear forces. The design method adopted, utilizing the iterative process proposed by Lourenco & Figueiras (1993) obtained from equations of equilibrium developed by Gupta (1896) , will be compared to results of experimentally tested shell elements found in the literature using the program DIANA.