Influence of type and amount of straw cover on weed emergence

This research was undertaken during 2003-2004 growing season to evaluate the effects of type [forage sorghum hybrid Cober Exp (Sorghum bicolor x Sorghum sudanense), forage millet (Pennisetum americanum var. BN2), finger millet (Eleusine coracana), and St Lucia grass (Brachiaria brizantha)] and amount of straw cover (5.5 and 3.0 t ha(-1)) upon the emergence of Bidens pilosa, Chamaesyce spp., Amaranthus spp., and Commelina benghalensis, under field conditions of the Brazilian Cerrado, in the region of Uberlandia-MG. The control consisted additional treatment lacking the straw cover. Emergence of weed depended on the type and amount of straw cover, as well as the weed species. The lowest number of B. pilosa seedlings was found in the presence of forage sorghum straw; Chamaesyce spp. in the lack of straw; Amaranthus spp. in the presence of higher amount of forage sorghum and forage millet, and lower amounts of forage millet and Finger Millet. All the types and amounts of straw reduced the emergency of C. benghalensis, except at the lowest level of St Lucia grass and the lack of straw.

Control of Brachiaria decumbens and Panicum maximum by S-metolachlor as influenced by the occurrence of rain and amount of sugarcane straw on the soil

Com o objetivo de estudar o controle em pré-emergência de Brachiaria decumbens e Panicum maximum pelo herbicida S-metolachlor em função do intervalo de tempo entre a aplicação e a ocorrência de chuva e da quantidade de palha de cana-de-açúcar na superfície do solo, dois experimentos foram desenvolvidos em vasos mantidos em casa de vegetação. No primeiro, foram estudadas cinco quantidades de palha sobre o solo (0, 3, 6, 10 e 15 t ha-1) e cinco dosagens de S-metolachlor (0; 0,96; 1,44; 1,92 e 2,40 kg ha-1). No outro, foram avaliadas duas quantidades de palha sobre o solo (0 e 10 t ha-1) e sete intervalos de tempo entre a aplicação de S-metolachlor e a simulação de chuva (1 dia antes; logo após; 4, 8, 12, 16 e 20 dias após a aplicação). As dosagens de S-metolachlor não foram afetadas pelos níveis de palha na superfície do solo. Além disso, sem a manutenção de palha sobre o solo, o controle das plantas daninhas pelo herbicida S-metolachlor não foi influenciado pelos intervalos de tempo entre a aplicação e a simulação de chuva, até 20 dias. Com 10 t ha-1 de palha, o controle de B. decumbens e P. maximum pelo S-metolachlor não foi prejudicado quando choveu até 12 dias da sua aplicação ou um dia antes, mas, nesse caso apenas para P. maximum.

The amount of solar energy made available for the production of a sabia (Mimosa caesalpinaefolia Benth.) seed has a determinating effect on its becoming dormant

The amount of solar energy made available for the production of a sabid seed varied as a function of the time of the year, the face of the plant in which, the position in the plant on which and the position in the pod in which it was produced.Variation in solar energy availability as a consequence of the time of the year was a direct consequence of latitude. At 21degrees5'22 S the highest amounts of Global Solar Radiation (GSR) reaching the site where the experiment was conducted took place during the months from November through February. During these months there were no marked differences between any two of the amounts of GSR reaching faces North (N), South (S), West (W) East (E). From February through November (period during which the sabid plants of this study flowered and the resulting seeds matured and were harvested) the total GSR's were the lowest and marked differences were found between faces N and S, with face N receiving much more GSR than face S. During that period, faces W and E received practically the same amount of GSR and it was much less than that received by face N and much more than the one received by face S.The amount of biological energy made available for the development of a seed seemed also to vary according to a dry matter partitioning strategy by the plant -the central third of the plant seemed to be the one receiving the highest amounts of energy, followed either by the upper or the lower third of the plant- it was not very clear which third of the plant immediately followed the central one. The partitioning of biological energy at the pod level also seemed to follow a strategy by which the central seeds would be the ones to receive more, followed by the proximal seeds and these by the distal ones.This availability of energy seemed to have a direct effect on seed size, weight and on the percentage of seeds which showed a degree of dormancy deep enough to prevent their germinating under the conditions of a standard germination test.The implications of these results for the improvement of methods for the overcoming of dormancy of sabia seeds are discussed.

Temperature during soybean seed storage and the amount of electrolytes of soaked seeds solution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlation of Atopobium vaginae Amount With Bacterial Vaginosis Markers

Objective. The purpose of this study was to test the correlation of the amount of Atopobium vaginae with the most commonly used markers for bacterial vaginosis (BV).Materials and Methods. We enrolled 103 nonpregnant and premenopausal women that were positive for BV by Amsel criteria and with a Nugent score higher than 3. All women were negative for yeast, Chlamydia trachomatis, Trichomonas vaginalis, and Neisseria gonorrhoeae. A. vaginae concentration was determined by quantitative polymerase chain reaction from samples of vaginal rinsings with 2 mL of sterile saline.Results. There was no difference in the median values of A. vaginae concentration when comparing samples with presence or absence of each individual Amsel criterion. In the case of a higher pH cutoff value of 4.9, greater amounts of this microorganism (p = .02) were found. In addition, correlation tests showed that A. vaginae concentration is positively correlated with pH (p < .001) and with Nugent scores (p = .003).Conclusions. The quantification of A. vaginae is useful for identification of the most severe cases of BV.

Location of the mandibular foramen according to the amount of dental alveoli

The aim of this study was to analyze the anatomotopographic location of the mandibular foramen in the right and left ramus, and to verify the influence of the amount of dental alveoli on the foramen position. Thirty-five adult dry human mandibles of Araraquara Dental School, UNESP - São Paulo State University were assessed, with or without dental alveoli. Measurements were obtained, using a ruler and a digital caliper. The following distances were measured: Fl - distance between the lowest point of the mandibular incisure and the mandibular foramen (F point); FB - distance between the mandibular base and F point; FP - distance between the posterior margin of the ramus and F point; FA - distance between the anterior margin of the ramus and F point; FT - distance between the apex of the retromolar trigone and F point. The Mann-Whitney test was used to compare each measurement according to hemi-arch, and the Kruskal-Wallis test was used to analyze the influence of the presence of alveoli on the measures. For multiple comparison, Dunn's method was used. There was no statistically significant difference in the location of the mandibular foramen when compared to the right and left hemi-arches. The amount of dental alveoli influenced, significantly, only on FA and FP distances. Thus, it was concluded that the right and left mandibular ramus showed symmetry in the location of the mandibular foramen, and the amount of alveoli influenced on the distances of the anterior and posterior margins of the mandibular rams, in relation to the mandibular foramen.

Effect of larval food amount on ovariole development in queens of Trigona spinipes (Hymenoptera, Apinae)

Caste determination in Trigona spinipes Fabricius (Hymenoptera, Apidae, Meliponini) is trophogenic. Larvae that eat about 360 mu l of food become queens, while those who consume 36 mu l develop into workers. We studied the effect of larval nutrition on the number and length of ovarioles and on ovarian development in fifth instar larvae, white eyed, pink eyed and black-eyed pupae as well as newly emerged adults. All larvae have four ovarioles per ovary, while in queen pupae this number ranged from 8 to 15. Cyst formation, the cell death and other characteristics of ovary morphogenesis were the same regardless of the quantity of food consumed. These results are discussed in relation to caste differentiation in other bees.

Spectroscopy of InF3 based glasses containing a large amount of GdF3

Glass formation in the pseudo ternary system ZnF2-GdF3-BaF2-InF3 and other complex systems stabilized by NaF, CaF2, AlF3 and YF3 have been investigated. Samples with greater stability have been prepared and their properties measured. Optical absorption and emission spectra of Gd3+ ions doped glasses with 2, 4, 10 and 20% concentrations have been measured. Using the Judd-Ofelt theory and the experimental oscillator strengths, the Judd-Ofelt parameters have been calculated. The emission of Gd3+ ions from 6I and 6P has been detected and the lifetime has been measured.

Influence of different drying temperatures on the amount of essential oils and citral content in Cymbopogon citratus (DC) Stapf. - Poaceae

Studies were conducted to show the effect of different temperatures in the drying process on the amount and quality of essential oils of Cymbopogon citratus (DC) Stapf. Leaves were harvested in the experimental field of the Agronomical Sciences College, UNESP, Botucatu, SP, Brazil in September, 1996. Blades of the leaves were cut in small parts (about 1-1,5 cm length), dried for several days at 30°, 50°, 70° and 90°C, until establishment of the weights. In the following process a hydrodistillation, during 2.5 hours, by Clevenger apparatus, was subsidized to extract the essential oils. A higher amount of oil could clearly be collected with the lower drying temperatures, except at 30°C, affected by fungus growing. Aspergillus sp., Penicillium sp., Rhyzopus sp., Cladosporium sp., Trichoderma sp. and Alternaria sp. were observed in the leaves. The analysis of the oil by GC-MS showed the variation of citral concentration of the treatments (86,1 to 95,2%). The results proved it is worthwhile to spend more time and effort in the production process using longer times of careful drying.

Hepatic gluconeogenesis in rats trained to eat a single meal daily. Role of eating periodicity and the amount of food ingested in the last meal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Gingival margin alterations and the pre-orthodontic treatment amount of keratinized gingiva

The purpose of this retrospective study was to associate the amount of keratinized gingiva present in adolescents prior to orthodontic treatment to the development of gingival recessions after the end of treatment. The sample consisted of the intra-oral photographs and orthodontic study models from 209 Caucasian patients with a mean age of 11.20 ± 1.83 years on their initial records and 14.7 ± 1.8 years on their final records. Patients were either Angle Class I or II and were submitted to non-extraction orthodontic treatment. Gingival recession was evaluated by visual inspection of the lower incisors and canines as seen in the initial and final study models and intra-oral photographs. The amount of recession was quantified using a digital caliper and the observed post-treatment gingival margin alterations were classified as unaltered, coronal migration of the gingival margin or apical migration of the gingival margin. The width of the keratinized gingiva was measured from the mucogingival line to the gingival margin on the pre-treatment photographs. The teeth that developed gingival recession and those that did not have their gingival margin position changed did not differ in relation to the initial amount of keratinized gingiva (3.00 ± 0.61 and 3.5 ± 0.86 mm, respectively). Paradoxically, teeth that presented a coronal migration of the gingival margin had a smaller initial amount of keratinized gingiva (2.26 ± 0.31 mm). The mean amount of initial keratinized gingiva did not predispose lower incisors and canines to gingival recession.

Evaluation of water amount in hydrated ethanol fuel by gamma-ray attenuation technique

In this work, is presented an alternative and non conventional technique for evaluate the water amount present in the hydrated ethanol used as automotive fuel. The standard technique used in this kind of measure is the use of densimeter. The proposal of this work is based on the measure of the linear attenuation coefficient of hydrated ethanol, using the gamma-ray attenuation technique. The water amount, in volume, can be determined knowing the linear attenuation coefficient of hydrated ethanol. Samples of hydrated ethanol, collected at fuel stations, located in Sorocaba, SP, Brazil, were analyzed and the results showed the feasibility of the technique. © 2011 American Institute of Physics.

Influence of plaster drying on the amount of residual monomer in heat-cured acrylic resins

Aim: To evaluate the influence of plaster condition, dry or not, on the amount of residual monomer in heat-cured acrylic resin. Methods: Thirty acrylic resin specimens (65×10×3 mm) were fabricated and randomly assigned to 5 groups (n=6). The evaluated resins were heat-cured acrylic resins by conventional or microwave polymerization techniques and the plaster was previously dried in microwave oven in two groups. Each specimen was individually immersed in a test tube containing methanol (7 days) for surface analysis. In the groups for which internal monomer was evaluated, the specimens were fragmented and the small fragments were weighed prior to immersion in methanol. The analysis was made by high performance liquid chromatography (HPLC). Data were analyzed by ANOVA and Tukey test (p<5%) Results: showed statistical differences among the groups. Conclusions: The previous plaster drying influenced the residual monomer amount showing a decrease of these levels.

A Framework to Optimize Biodiversity Restoration Efforts Based on Habitat Amount and Landscape Connectivity

The effectiveness of ecological restoration actions toward biodiversity conservation depends on both local and landscape constraints. Extensive information on local constraints is already available, but few studies consider the landscape context when planning restoration actions. We propose a multiscale framework based on the landscape attributes of habitat amount and connectivity to infer landscape resilience and to set priority areas for restoration. Landscapes with intermediate habitat amount and where connectivity remains sufficiently high to favor recolonization were considered to be intermediately resilient, with high possibilities of restoration effectiveness and thus were designated as priority areas for restoration actions. The proposed method consists of three steps: (1) quantifying habitat amount and connectivity; (2) using landscape ecology theory to identify intermediate resilience landscapes based on habitat amount, percolation theory, and landscape connectivity; and (3) ranking landscapes according to their importance as corridors or bottlenecks for biological flows on a broader scale, based on a graph theory approach. We present a case study for the Brazilian Atlantic Forest (approximately 150 million hectares) in order to demonstrate the proposed method. For the Atlantic Forest, landscapes that present high restoration effectiveness represent only 10% of the region, but contain approximately 15 million hectares that could be targeted for restoration actions (an area similar to today's remaining forest extent). The proposed method represents a practical way to both plan restoration actions and optimize biodiversity conservation efforts by focusing on landscapes that would result in greater conservation benefits. © 2013 Society for Ecological Restoration.

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.