Synthesis and characterization of lead zirconate titanate (PZT) obtained by two chemical methods

Lead zirconate titanate (PZT) was synthesized at the ratio of Zr/Ti=52/48 using two synthesis methods: the polymeric precursor method (PPM) and the microwave-assisted hydrothermal method (MAHM). The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size distribution by sedimentation, hysteresis measurements and photoluminescence (PL). The results showed that PZT powders are composed of tetragonal and rhombohedral phases. Different particle sizes and morphologies were obtained depending upon the synthesis method. From the hysteresis loop verified that PZT powders synthesized by the PPM have a typical loop of ferroelectric material and are more influenced by spatial charges while particles synthesized by the MAHM have a hysteresis loop similar to paraelectric material and are less influenced by spatial charges. Both samples showed PL behavior in the green region (525 nm) whereas the sample synthesized by the PPM showed higher intensity in spectra. © 2013 Elsevier Ltd and Techna Group S.r.l.

Electroluminescence of zinc oxide thin-films prepared via polymeric precursor and via sol-gel methods

Zinc oxide (ZnO) is an electroluminescent (EL) material that can emit light in different regions of electromagnetic spectrum when electrically excited. Since ZnO is chemically stable, inexpensive and environmentally friendly material, its EL property can be useful to construct solid-state lamps for illumination or as UV emitter. We present here two wet chemical methods to prepare ZnO thin-films: the Pechini method and the sol-gel method, with both methods resulting in crystalline and transparent films with transmittance > 85% at 550 nm. These films were used to make thin-film electroluminescent devices (TFELD) using two different insulator layers: lithium fluoride (LiF) or silica (SiO2). All the devices exhibit at least two wide emission bands in the visible range centered at 420 nm and at 380 nm attributed to the electronic defects in the ZnO optical band gap. Besides these two bands, the device using SiO2 and ZnO film obtained via sol-gel exhibits an additional band in the UV range centered at 350 nm which can be attributed to excitonic emission. These emission bands of ZnO can transfer their energy when a proper dopant is present. For the devices produced the voltage-current characteristics were measured in a specific range of applied voltage. (C) 2007 Elsevier B.V. All rights reserved.

Heat-treatment effects on the magnetic response of superconducting mesoscopic samples

The use of chemical methods in the synthesis of high-quality and small-size polycrystalline samples has been increased in recent years. In this work, a chemical route based on an aqueous precursor solution of metals followed by the addition of a water-soluble polymer formed by ethylenediaminetetraacetic acid (EDTA) and ethylene glycol (EG) was tested to produce superconducting mesoscopic YBa(2)Cu(3)O(7-gamma) samples. Different conditions of heat treatments and the effects of argon and oxygen atmospheres during the calcination steps were traced using X-ray diffraction (XRD), scanning electron microscopy (SEM) and magnetic measurements. (C) 2008 Elsevier B. V. All rights reserved.

Avanços metodológicos na avaliação da qualidade da forragem conservada

A avaliação correta do valor nutricional da forragem passa obrigatoriamente por emprego de metodologias adequadas. A qualidade da forragem depende dos produtos da fermentação, no caso da silagem, ou da magnitude das perdas de compostos solúveis e atuação de microrganismos no caso do feno. A abordagem do tema: Avanços metodológicos na avaliação da qualidade da forragem conservada, na 44ª Reunião Anual da Sociedade Brasileira de Zootecnia, tem como objetivo destacar as principais metodologias empregadas na avaliação específica de forragens conservadas, adicionais às avaliações tradicionais de composição químico-bromatológica desses volumosos, e colocar em discussão a necessidade de padronização de procedimentos analíticos. Assim, a revisão prioriza a descrição e sistematização de métodos físicos e químicos importantes para serem implementados na avaliação de forragens conservadas, na tentativa de homogeneizar tais procedimentos. Os recursos metodológicos disponíveis atualmente permitem não somente quantificar, mas também qualificar perdas ocorridas no processo de conservação, exposição aeróbia e oferta dos volumosos aos animais. Esse fato sugere que a adoção de estratégias de manejo dessas forragens deverá, preferencialmente, ser acompanhada de avaliação de perdas integradas no processo.

Phylogenetic relationship between species of genus Cattleya as a function of crossing compatibility

The applicability of the gradcd fertility method in the study of the phylogenctic distance of orchids was investigated with emphasis on the production of F1 hybrid secds with cmbryos. Specics of the genus Cattleya, subgenera Monophyllae, Aurantiacae and Cattleya wece used and the results compared with those obtained with morphological and chemical methods.

Bioremediation of direct dyes in simulated textile effluents by a paramorphogenic form of Aspergillus oryzae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dielectric and ferroelectric properties of PZT and PT thin films for saw sensors applications

It is very important for the building of the SAW devices to study dielectric and ferroelectrics properties because every SAW device is based in piezoelectric effect that it is made up to transform an electric sign in the mechanical or acoustic sign and a mechanical or acoustic sign in an electric sign. Thus, the purpose of the present work is to prepare PbZr 0,53Ti0.47O3 (PZT) and PbTiO3 (PT) thin films on the Si (100) substrates across spin-coating using a chemical method based in polymeric precursors. After conventional treatment in the furnace, the films were characterized by impedance spectroscopy and hysteresis loops to know its dielectric and ferroelectric properties.

Modelo experiemtal de neotrquéia em coelho utilizando técnicas de engenharia de tecidos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Extratores para nitrogênio disponível do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da disponibilidade de nitrogênio para milho em sucessão a gramíneas e leguminosas de cobertura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise morfológica e de resistência à flexão da interface ponta ativa/haste metálica em fresas carbide após o uso de esterilização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da metodologia de síntese nas propriedades elétricas da cerâmica PMN-PT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Imobilização multipontual covalente de xilanases: seleção de derivados ativos e estabilizados

Pós-graduação em Biotecnologia - IQ

Estrutura e propriedades de filmes finos ferroelétricos do sistema PZT

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)