Estimativa de parâmetros genéticos, fenotípicos e ambientes para as produções de leite no dia do controle e em 305 dias de lactação de vacas da raça Gir

Dados de 32.779 controles mensais, de 3.605 lactações em 305 dias (PL305), de 2.082 vacas Gir, filhas de 281 touros, com partos ocorridos de 1987 a 1999, em 11 rebanhos, foram usados com o objetivo de verificar a viabilidade de utilização da produção de leite no dia do controle (PLDC1 a PLDC10) em avaliações genéticas da raça Gir. Foram realizadas análises bivariadas entre as PLDC1 a PLDC10 e PL305, usando para estimar os componentes de (co)variâncias o método de máxima verossimilhança restrita, sob modelo animal, incluindo as três primeiras lactações como medidas repetidas de uma mesma vaca, diferenciadas conforme o grupo contemporâneo de rebanho-ano-estação, de acordo com a idade da vaca ao parto e o intervalo parto-primeiro controle na PLDC1. As médias observadas e os respectivos desvios-padrão (kg) para PLDC1 a PLDC10 e PL305 foram: 11,97±4,64; 11,93±4,68; 10,98±4,40; 10,18±4,12; 9,66±3,88; 9,20±3,69; 8,63±3,51; 8,08±3,33; 7,59±3,27; 7,22±3,15 e 2.746,17±1.299,90. A duração de lactação foi de 273,72±48,95 dias. As estimativas de herdabilidade variaram nas PLDC de 0,24 a 0,14, sendo maior no primeiro controle e decrescendo até o décimo. A herdabilidade da PL305 foi de 0,19. As estimativas de correlações genéticas entre as PLDC e PL305 variaram de 0,85 a 1,00. As correlações genéticas entre PLDC1 a PLDC9 com PLDC6 a PLDC10 foram acima de 0,80, à exceção entre PLDC9 com PLDC1 e PLDC10 com PLDC1, PLDC2, PLDC3 e PLDC6, que foram inferiores. As correlações fenotípicas tiveram valores intermediários entre as correlações genéticas e as residuais (menores). Considerando a eficiência relativa de seleção, esta mostrou que se baseada nas PLDC2 a PLDC4 ocorrerá a mesma ou melhor resposta que se praticada na PL305.

Adhesion strength characterization of PVDF/HA coating on cp Ti surface modified by laser beam irradiation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efficacy of NiTi rotary instruments in removing calcium hydroxide dressing residues from root canal walls

The aim of this study was to evaluate the efficacy of three rotary instrument systems (K3, ProTaper and Twisted File) in removing calcium hydroxide residues from root canal walls. Thirty-four human mandibular incisors were instrumented with the ProTaper System up to the F2 instrument, irrigated with 2.5% NaOCl followed by 17% EDTA, and filled with a calcium hydroxide intracanal dressing. After 7 days, the calcium hydroxide dressing was removed using the following rotary instruments: G1 - NiTi size 25, 0.06 taper, of the K3 System; G2 - NiTi F2, of the ProTaper System; or G3 - NiTi size 25, 0.06 taper, of the Twisted File System. The teeth were longitudinally grooved on the buccal and lingual root surfaces, split along their long axis, and their apical and cervical canal thirds were evaluated by SEM (×1000). The images were scored and the data were statistically analyzed using the Kruskall Wallis test. None of the instruments removed the calcium hydroxide dressing completely, either in the apical or cervical thirds, and no significant differences were observed among the rotary instruments tested (p > 0.05).

Heart failure alters MyoD and MRF4 expressions in rat skeletal muscle

Heart failure (HF) is characterized by a skeletal muscle myopathy with increased expression of fast myosin heavy chains (MHCs). The skeletal muscle-specific molecular regulatory mechanisms controlling MHC expression during HF have not been described. Myogenic regulatory factors (MRFs), a family of transcriptional factors that control the expression of several skeletal muscle-specific genes, may be related to these alterations. This investigation was undertaken in order to examine potential relationships between MRF mRNA expression and MHC protein isoforms in Wistar rat skeletal muscle with monocrotaline-induced HF. We studied soleus (Sol) and extensor digitorum longus (EDL) muscles from both HF and control Wistar rats. MyoD, myogenin and MRF4 contents were determined using reverse transcription-polymerase chain reaction while MHC isoforms were separated using polyacrylamide gel electrophoresis. Despite no change in MHC composition of Wistar rat skeletal muscles with HF, the mRNA relative expression of MyoD in Sol and EDL muscles and that of MRF4 in Sol muscle were significantly reduced, whereas myogenin was not changed in both muscles. This down-regulation in the mRNA relative expression of MRF4 in Sol was associated with atrophy in response to HF while these alterations were not present in EDL muscle. Taken together, our results show a potential role for MRFs in skeletal muscle myopathy during HF. © 2006 Blackwell Science Ltd.

Gene expression changes associated with myocarditis and fibrosis in hearts of mice with chronic chagasic cardiomyopathy

Chronic chagasic cardiomyopathy is a leading cause of heart failure in Latin American countries. About 30% of Trypanosoma cruzi-infected individuals develop this severe symptomatic form of the disease, characterized by intense inflammatory response accompanied by fibrosis in the heart.We performed an extensive microarray analysis of hearts from a mouse model of this disease and identified significant alterations in expression of ~12% of the sampled genes. Extensive up-regulations were associated with immune-inflammatory responses (chemokines, adhesion molecules, cathepsins, and major histocompatibility complex molecules) and fibrosis (extracellular matrix components, lysyl oxidase, and tissue inhibitor of metalloproteinase 1). Our results indicate potentially relevant factors involved in the pathogenesis of the disease that may provide newtherapeutic targets in chronic Chagas disease. © 2010 by the Infectious Diseases Society of America.

Processos midiáticos e produção de sentido

Constituída por um conjunto de artigos de docentes da Faculdade de Arquitetura, Artes e Comunicação da Unesp e de outras instituições de ensino superior, esta obra tem como ponto de convergência a análise da mídia. Organizada pelo professor Mauro de Souza Ventura, coordenador do Programa de Pós-Graduação em Comunicação da Unesp, o livro busca compreender as dimensões socioculturais e de produção de sentido nos processos de elaboração, veiculação e recepção da comunicação midiática. Os aspectos abordados são diversos, mas os artigos podem ser reunidos em torno de três eixos - questões teórico-metodológicas, análises específicas de notícias e estudos sobre algumas especializações da comunicação da mídia. As análises transitam por temas como as ambivalências da chamada Teoria da Comunicação, o papel de storytellers dos jornalistas em sua produção na web, uma comparação das coberturas do caso da estudante Geysy Arruda feitas pelos jornais Folha e Estadão e o jornalismo científico na imprensa brasileira, entre outros.

Rendimento do suco e qualidade química do abacaxi sob lâminas e frequências de irrigação

The pineapple crop has a permanent demand for water, variable and dependent on their stage of development, which may affect the production and fruit quality. This study aimed to evaluate the chemical quality of fruits Smooth cayenne pineapple submitted to different levels and frequency of water replacement in the soil. We used a randomized block design in a 4 x 2 factorial arrangement, consisting of four levels of soil water replenishment (50%, 75%, 100% and 125% of crop evapotranspiration) and two irrigation frequencies (1 and 3 days) with four replications. We evaluated the parameters: juice yield (RS), hydrogen potential (pH), total soluble solids (SST), titratable acidity (ATT), SST/ATT relationship, ascorbic acid (AA). It was observed that the blades and irrigation frequencies did not affect the juice yield (RS) and ascorbic acid (AA), the increase of the blades irrigation influenced positively the quality of the fruit as it increases the values of total soluble solids (SST) decreases the acidity (ATT), raises the relationship SST/ATT and hydrogen potential (pH).

Efeitos da aplicação de resina hidrofóbica sobre a resistência de união de adesivos autocondicionantes de frasco único

Introduction: It is known that self-etching adhesive systems can act as semi-permeable membranes. Objective: Evaluate the effects of additional layer of hydrophobic resin on the microtensile bond strength of self-etching one-bottle adhesives. Material and method: Sixty bovine incisors were used in this study. The facial enamel surfaces of the crowns were abraded with silicon carbide paper to expose flat, mid-coronal dentin surfaces. The following adhesives were used: Clearfil Tri S Bond (CTSB), AdheSE One (ADH) and One Coat  7.0 (OC). Each material was tested with and without applying an additional layer of hydrophobic material from the same manufacturer. Z-350 composite resin was inserted in three 1 mm increments. All adhesive restorative procedure was performed under simulated pulpal pressure and the microtensile test was performed immediately after curing the composite resin. Data were submitted to ANOVA and Tukey test (p < 0.05). Result: For all adhesives tested, the worst results were observed in groups which the additional layer of hydrophobic resin was not applied. Conclusion: The application of additional layer of hydrophobic material can improve the adhesion of self-etching all-in-one adhesive systems.

Avaliação da capacidade de vedamento e pH do tampão apical com cimento Portland branco acrescido de radiopacificadores convencionais

The Portland cement has shown similar biological properties to calcium hydroxide, but its radiopacity is lower. Therefore, the addition of materials that minimize this deficiency should be considered. OBJECTIVE: To evaluate the apical sealing ability and pH of a white Portland cement added of several radiopacifying agents. MATERIAL AND METHODS: Forty bovine roots with incomplete apices were selected, and the foraminal openings were standardized to PM 720G bur. After the external root sealing, an apical intracanal barrier 10.0 mm thick was executed with the white Portland cement powder, pure or added of a radiopacifying agent (iodoform, zinc oxide or bismuth subnitrate), and distilled water (0.37 mL). The apical roots were immersed 24h in water in humid atmosphere, and after that they were immersed 24h in 2% Rhodamine B, under vacuum. In sequence, the roots were longitudinally sectioned, the root fragments were photographed, the images were digitalized and the apical infiltration was measured by the Image Tool program. The pH solutions were also evaluated, in 24h and 48h and 7 and 30 days. Data were submitted to Anova test. RESULTS: The zinc oxide solution has the lowest apical infiltration in relation to the other groups (p < 0.05). The pH behavior varied during the analysis, and in the period of 24h all groups showed the highest values (p < 0.05). CONCLUSION: The type of radiopacifying agent used interferes in the sealing ability of the apical barrier, and zinc oxide showed to be the most beneficial one. The pH varies according to the period of analysis, and the highest values were obtained in the first 24h (p < 0.05).

Avaliação do pH, da solubilidade e da infiltração marginal em retrobturações com o Sealer 26 puro ou acrescido de iodofórmio

Sealer 26® cement contains bisphenol epoxy resin associated with calcium hydroxide, presenting smaller radiopacity than other endodontic cements. Aiming to improve this property, iodoform has been added in its composition. However, this addition's possible changes in physical and chemical properties still need to be studied. OBJECTIVE: To evaluate the apical sealing ability, solubility, and pH of Sealer 26® alone or with iodoform, at several proportions. MATERIAL AND METHODS: Three experimental mixtures of Sealer 26®, alone or with iodoform, were prepared and subjected to solubility test. Additionally, these combinations were inserted into polyethylene tubes and immersed in distilled water, and, their pH was evaluated after 24-h and 7-day periods. Subsequently, forty roots of extracted lower incisors subdivided into four groups of 10 specimens each, were retrograde filled with one of the previously described mixtures and gutta-percha points. The roots were immersed in Rhodamine B, under vacuum, for 72 hours. After this period, the specimens were longitudinally sectioned, root fragments photographed, these images scanned, and apical infiltration measured by Image tool software. The obtained data were subjected to statistical analysis, at a significance level of 5%. RESULTS: Marginal leakage and solubility tests did not show any difference among the experimental groups (p > 0.05). pH analysis was only statistically different at 24-h period and between Sealer 26® alone and 1.1g iodoform group (p < 0.05). CONCLUSION: The presence of iodoform in Sealer 26®, at the used proportions, did not alter the solubility, apical marginal leakage and pH properties of the original cement.

Hydrogen ion and calcium releasing of MTA Fillapex® and MTA-based formulations

MTA is composed of various metal oxides, calcium oxide and bismuth. It has good biological properties and is indicated in cases of endodontic complications. Several commercial formulations are available and further studies are necessary to evaluate these materials. Objective: To evaluate pH and calcium releasing of MTA Fillapex® compared with gray and white MTA. Material and methods: Gray and white MTA (Angelus) and MTA Fillapex® (Angelus) were manipulated and placed into polyethylene tubes and immersed in distilled water. The pH of these solutions was measured at 24 hours, 7 days and 14 days. Simultaneously, at these same aforementioned periods, these materials' calcium releasing was quantified, through atomic absorption spectrophotometry. The results were submitted to ANOVA, with level of significance at 5%. Results: Concerning to pH, the materials present similar behaviors among each other at 24 hours (p > 0.05). At 7 and 14 days, MTA Fillapex® provided significantly lower pH values than the other materials (p < 0.05). Regarding to calcium releasing, at 24 hours and 7 days, MTA Fillapex® provided lower releasing than the other materials (p < 0.05). After 14 days, differences were found between MTA Fillapex® and gray MTA (p < 0.05). Conclusion: All materials showed alkaline pH and calcium releasing, with significantly lower values for MTA Fillapex® sealer.

Myosin heavy chain expression and atrophy in rat skeletal muscle during transition from cardiac hypertrophy to heart failure

The purpose of this investigation was to determine whether changes in myosin heavy chain (MHC) expression and atrophy in rat skeletal muscle are observed during transition from cardiac hypertrophy to chronic heart failure (CHF) induced by aortic stenosis (AS). AS and control animals were studied 12 and 18 weeks after surgery and when overt CHF had developed in AS animals, 28 weeks after the surgery. The following parameters were studied in the soleus muscle: muscle atrophy index (soleus weight/body weight), muscle fibre diameter and frequency and MHC expression. AS animals presented decreases in both MHC1 and type I fibres and increases in both MHC2a and type IIa fibres during late cardiac hypertrophy and CHF. Type IIa fibre atrophy occurred during CHF. In conclusion, our data demonstrate that skeletal muscle phenotype changes occur in both late cardiac hypertrophy and heart failure; this suggests that attention should be given to the fact that skeletal muscle phenotype changes occur prior to overt heart failure symptoms.

Supervisão da furação com foco na estimativa do diâmetro do furo

Processos automatizados, como a furação, podem melhorar com o uso de métodos de controle e supervisão, com destaque para sensores e redes neurais artificiais. Neste estudo, foram utilizados diferentes sensores instalados em máquina-ferramenta para o registro dos sinais de força de avanço, potência elétrica, aceleração e sinal acústico, durante a furação de corpos de prova compostos por uma liga de titânio seguida de uma liga de alumínio. Os sinais e os diâmetros dos furos medidos na furação das amostras foram utilizados no treinamento da rede neural artificial. Os erros foram apresentados e analisados. Os resultados demonstraram alta capacidade da rede em estimar o diâmetro do furo nas diferentes condições de usinagem com erros baixos e até mesmo desprezíveis para a maior parte das aplicações industriais, mostrando assim eficiência do método proposto.

Carlos Benjamin de Lyra e a topologia algébrica no Brasil

Pós-graduação em Educação Matemática - IGCE