Nutritional requirements of Zymomonas mobilis CCT 4494 for levan production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de levana por Zymomonas mobilis CCT 4494 em meio de cultura sacarose e caracterização do sistema enzimático responsável pela hidrólise de sacarose e de formação de levana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de suportes para a imobilização de Zymomonas mobilis CCT 4494 visando à produção de etanol e levana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cassava wastewater as carbon source for the polyhydroxybutyrate production by Azotobacter vinelandii CCT 2841

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seleção de micro-organismos celulolíticos comparados com o Trichoderma reesei CCT 2768

As celulases atualmente são enzimas extensivamente estudadas para a hidrólise de resíduos lignocelulósicos para obtenção de açúcares fermentescíveis utilizáveis em diferentes processos biotecnológicos, como a produção de bioetanol. O objetivo deste trabalho foi encontrar fungos celulolíticos que sejam eficientes nos processos de degradação da biomassa lignocelulósica. No presente trabalho foram selecionados 4 fungos celulolíticos previamente isolados pelo Laboratório de Biotecnologia Industrial (UNESP – Assis). Estes fungos foram cultivados em bagaço de cana-de-açúcar como substrato e para seus extratos enzimáticos foram testados suas atividades para celulases (FPase) e endoglucanases (CMCase). Os fungos FS09 (0,054 FPU/mL e 1,79 FPU/g de substrato, 0,874 U/mL e 29,1 U/g de substrato) e M51 (0,049 FPU/mL e 1,62 FPU/g de substrato, 1,094 U/mL e 36,46 U/g de substrato), mostrando valores superiores ao fungo T.reesei CCT 2768 que é referência em estudos e produção de celulases.

Quantificação da floculação de Saccharomyces cerevisiae por bactérias contaminantes da fermentação alcoólica

O assentamento de células de leveduras no fundo das dornas e perdas de células nas centrífugas podem ser causadas por bactérias floculantes, contaminantes naturais da fermentação alcoólica industrial. Estes problemas levam a queda no rendimento e produtividade do etanol. O presente trabalho visa a caracterização da floculação de Saccharomyces cerevisiae por Lactobacillus fermentum CCT 1396. As células de leveduras e bactérias foram misturadas e a floculação das células quantificadas por espectrofotometria. Concentrações de bactérias numa faixa de 0,4 a 3,8g/L (biomassa seca) foram testadas a fim de determinar a ótima concentração de bactérias necessária para provocar a floculação das leveduras. O efeito de pH na floculação das células de leveduras e bactérias foi determinado. 1,38g/L de bactéria foi necessário para a floculação, de 65,4g/L de células de levedura com tempo de contato entre as células (sob agitação) de 15 minutos e repouso de 20 minutos. No pH 3,0 pouco efeito na floculação celular foi detectado e as células continuaram floculadas, mas na faixa de pH 2,0 -- 2,5 a floculação foi próxima de zero. Esta técnica pode ser utilizada para o controle da floculação de leveduras de indústrias de produção de álcool, para determinar a origem desta floculação, já que trata-se de uma técnica fácil, econômica e rápida.

THE EFFECT of IMMEDIATE DENTIN SEALING on THE MARGINAL ADAPTATION and BOND STRENGTHS of TOTAL-ETCH and SELF-ETCH ADHESIVES

Statement of problem. Sealing ability and bond strengths of total-etch and self-etch dentin adhesives used for immediate dentin sealing have not been assessed and established.Purpose. The purpose of this study was to determine the effectiveness of immediate dentin sealing (IDS) using total-etch or self-etch dentin adhesives on microleakage and microtensile bond strength.Material and methods. Twenty recently extracted molars were selected, and standard MOD inlay preparations were made with the gingival margins located below the cemento-enamel unction. The teeth were assigned to 4 experimental groups (n=5) according to the indirect composite restoration cementation technique used: (1) immediate dentin sealing with Adper Single Bond (TEBI); (2) conventional adhesive cementation technique using Adper Single Bond (TEAI); (3) immediate dentin sealing using Adper Prompt L-Pop (SEBI); or (4) conventional adhesive cementation technique using Adper Prompt L-Pop (SEAI). The restored teeth were thermal cycled 1,000 times between 5 degrees and 55 degrees C and then immersed in 50% ammoniacal silver nitrate. Three specimens per restoration were evaluated for microleakage, according to predefined scores, and submitted to Friedman's test (alpha-.05). The specimens were then sectioned to obtain 0.8 +/- 0.2-mm-thick sticks (with n ranging from 32 to 57 specimens) and submitted to microtensile bond strength (mu TBS) testing. The obtained data were submitted to 2-way ANOVA test (alpha=.05).Results. None of the experimental groups demonstrated complete elimination of marginal microleakage. There were significant differences in microleakage of the tested adhesives (P>.001). IDS microleakage scores were similar to those obtained using the conventional cementation technique (CCT) for both adhesives. The highest mean bond strengths were obtained with TEBI (51.1 MPa), whereas SEAI showed the lowest mean bond strengths (1.7 MPa). IDS resulted in significantly higher bond strengths than CCT (P<.001).Conclusions. Total-etch and self-etch adhesives have a significant effect on IDS. IDS resulted in high bond strengths for both adhesives; however, the microleakage was similar to that obtained with CCT (J Prosthet Dent 2009;102:1-9)

Studies on the electrochemical disinfection of water containing Escherichia coli using a Dimensionally Stable Anode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de caldo de cana-de-açúcar para produção de levana por Zymomonas mobilis CCT4494

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Austenite decomposition of C-Mn steel containing boron by continuous cooling

The austenite decomposition in C-Mn steel containing boron was studied by continuous cooling from 1100 and 845 degreesC using the Jominy test. The results indicate that the different cooling speeds and the presence of boron refine and change the percentage of ferrite microstructure, martensite, and fine pearlite. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Effect of 3,4,4 '-trichlorocarbanilide on growth of lactic acid bacteria contaminants in alcoholic fermentation

3,4,4'-trichlorocarbanilide (TCC) was rested as a new method of bacterial growth control for S. cerevisiae alcoholic fermentations of diluted high test molasses (HTM). Minimal inhibitory concentration (MIC) was tested to determine the necessary concentration of TCC to control bacterial growth. The fed-batch alcoholic fermentation process was used with cell recycle similar to industrial conditions and Lactobacillus fermentum CCT 1407 was mixed in the first inoculum to grow with the yeast. Yeast extract was added into the must to stimulate bacterial growth. The best results of TCC's MIC to bacterial growth of Lactobacillus fermentum and Leuconostoc mesenteroides (< 0.125-1.0 mu g/ml) and Saccharomyces cerevisiae (16 mu g/ml) occurred when it was combined with sodium dodecylsulphate (SDS) in a 1: 4 TCC/SDS ratio (wt/wt) in distilled water solution. 1.8 g/l TCC entrapped in calcium alginate added to the must with yeast extract inhibited the growth of Lactobacillus fermentum CCT 1407 maintaining a controlled acidity, higher yeast viability and up to 20.8% of improvement in the average of alcoholic efficiency. Addition of 0.075 g/l TCC entrapped in calcium alginate and 1.67 mg/l SDS in the wort with yeast extract (0-5.0 g/l), inhibited and controlled the extensive bacterial contamination for 19 cycles of fermentation. (C) 1998 Published by Elsevier B.V. Ltd.

Maxi-K channels contribute to urinary potassium excretion in the ROMK-deficient mouse model of Type II Bartter's syndrome and in adaptation to a high-K diet

Type II Bartter's syndrome is a hereditary hypokalemic renal salt-wasting disorder caused by mutations in the ROMK channel (Kir1.1; Kcnj1), mediating potassium recycling in the thick ascending limb of Henle's loop (TAL) and potassium secretion in the distal tubule and cortical collecting duct (CCT). Newborns with Type II Bartter are transiently hyperkalemic, consistent with loss of ROMK channel function in potassium secretion in distal convoluted tubule and CCT. Yet, these infants rapidly develop persistent hypokalemia owing to increased renal potassium excretion mediated by unknown mechanisms. Here, we used free-flow micropuncture and stationary microperfusion of the late distal tubule to explore the mechanism of renal potassium wasting in the Romk-deficient, Type II Bartter's mouse. We show that potassium absorption in the loop of Henle is reduced in Romk-deficient mice and can account for a significant fraction of renal potassium loss. In addition, we show that iberiotoxin (IBTX)-sensitive, flow-stimulated maxi-K channels account for sustained potassium secretion in the late distal tubule, despite loss of ROMK function. IBTX-sensitive potassium secretion is also increased in high-potassium-adapted wild-type mice. Thus, renal potassium wasting in Type II Bartter is due to both reduced reabsorption in the TAL and K secretion by max-K channels in the late distal tubule. © 2006 International Society of Nephrology.

Production of monoclonal antibodies against Streptococcus mutans antigens

Several studies have been conducted in the last decades aiming to obtain an anti-canies vaccine, however some studies have demonstrated cross reactivity between Streptococcus mutans surface antigens and the human cardiac tissue. In this work, the reactivity of five anti-Streptococcus mutans monoclonal antibodies (MoAb) (24A, 56G, G8, E8 and F6) was tested against oral streptococci, cardiac antigens and skeletal and cardiac myosins, aiming to evaluate the specificity of these MoAb. The hybrid producers of immunoglobulins of the IgG 2b class were cloned by limit dilution and expanded in vivo. MoAb were tested by ELISA. The hybrid 24A reacted with S. mutans CCT 1910, S. salivarius CCT 0365 and S. pyogenes T23. No reactivity difference was observed among the tested species. Cross reactivity with heart and cardiac myosin was not confirmed and only reaction with myosin of skeletal muscle was observed (p = 0.0381). The hybrid 56G reacted with all the tested microorganisms and there was statistically significant difference between S. mutans and S. pyogenes T23 (p < 0.001). This hybrid also reacted with myosin of skeletal muscle (p = 0.0095). C8, E8 and F6 presented low reactivity against oral streptococci strains and no reactivity against cardiac antigens. The data of this study showed that the 24A and 56G anti-S. mutans MoAb presented reactivity with S. pyogenes and S. salivarius, reinforcing the occurrence of common antigens between these species. The tested MoAb presented low cross-reactivity with myosin of skeletal muscle, but anti-heart activity could not be confirmed.

Análise dos parâmetros cinéticos para produção de levana por Zymomonas mobilis utilizando fermentação submersa

Levan is an exopolysaccharide synthesized by several microorganisms during fermentation of a culture medium containing sucrose, yeast extract and minerals. This biopolymer has applications in the food segment as stabilizers, thickeners, as carriers for flavor and fragrances, as well as in the pharmaceutical segment as a hypocholesterolemic agent and for exhibiting antitumor activity. This work aimed to analyze the kinetic parameters for levan production. The microorganism used was Zymomonas mobilis CCT 4494, incubated in a synthetic medium containing 200.0 g L-1 of sucrose, in a rotary shaker at 200 rpm and 30°C. Samples were taken every 24h, during a period of 96h, in order to determine variations of pH, biomass, reducing sugar, total reducing sugar and levan formation. It was observed that yields of biomass and synthesized biopolymer in 24h were superior to those obtained in 48, 72 and 96h of fermentation.

Influence of medium composition in the production of ethanol by Zymomonas mobilis

The production of ethanol using Zymomonas mobilis had been reported to be three to four times larger than with Saccharomyces cereviseae. The influence of pH, temperature and composition of the means of fermentation are parameters that can direct the metabolism for the production of ethanol. The objective of this study was to evaluate the production of ethanol by Zymomonas mobilis CCT 4494, by variations of the initial pH, temperature and concentrations KCl, K 2SO4, MgSO4, CaCl2 and sucrose, by a factorial experimental design of type 27-2, according to the model proposed by Box et al. (1978). For this, the broth of sugar cane was used as sole carbon source, because it is cheap and easily accessible in the region of São José do Rio Preto, São Paulo State. According to the experimental design, the bacteria Zymomonas mobilis CCT 4494 has adapted in the fermentation mean containing high concentrations of sucrose, and supported the change of pH and temperature of fermentation. The highest amount of ethanol produced was 8.89 mg mL-1. This is not similar to the levels of secondary metabolites produced by Zymomonas mobilis CCT 4494.