Discoloration process modeling by neural network

The photo-oxidation of acid orange 52 dye was performed in the presence of H2O2, utilizing UV light, aiming the discoloration process modeling and the process variable influence characterization. The discoloration process was modeled by the use of feedforward neural network. Each sample was characterized by five independent variables (dye concentration, pH, hydrogen peroxide volume, temperature and time of operation) and a dependent variable (absorbance). The neural model has also provided, through Garson Partition coefficients and the Pertubation method, the independent variable influence order determination. The results indicated that the time of operation was the predominant variable and reaction mean temperature was the lesser influent variable. The neural model obtained presented coefficients of correlation on the order 0.98, for sets of trainability, validation and testing, indicating the power of prediction of the model and its character of generalization. (c) 2007 Elsevier B.V. All rights reserved.

Usage of enterprise modeling processes and information systems design to forecast demand

Managing the great complexity of enterprise system, due to entities numbers, decision and process varieties involved to be controlled results in a very hard task because deals with the integration of its operations and its information systems. Moreover, the enterprises find themselves in a constant changing process, reacting in a dynamic and competitive environment where their business processes are constantly altered. The transformation of business processes into models allows to analyze and redefine them. Through computing tools usage it is possible to minimize the cost and risks of an enterprise integration design. This article claims for the necessity of modeling the processes in order to define more precisely the enterprise business requirements and the adequate usage of the modeling methodologies. Following these patterns, the paper concerns the process modeling relative to the domain of demand forecasting as a practical example. The domain of demand forecasting was built based on a theoretical review. The resulting models considered as reference model are transformed into information systems and have the aim to introduce a generic solution and be start point of better practical forecasting. The proposal is to promote the adequacy of the information system to the real needs of an enterprise in order to enable it to obtain and accompany better results, minimizing design errors, time, money and effort. The enterprise processes modeling are obtained with the usage of CIMOSA language and to the support information system it was used the UML language.

An alternative process for butanol production: Continuous flash fermentation

The objective of this work is to introduce and demonstrate the technical feasibility of the continuous flash fermentation for the production of butanol. The evaluation was carried out through mathematical modeling and computer simulation which is a good approach in such a process development stage. The process consists of three interconnected units, as follows: the fermentor, the cell retention system (tangential microfiltration) and the vacuum flash vessel (responsible for the continuous recovery of butanol from the broth). The efficiency of this process was experimentally validated for the ethanol fermentation, whose main results are also shown. With the proposed design the concentration of butanol in the fermentor was lowered from 11.3 to 7.8 g/l, which represented a significant reduction in the inhibitory effect. As a result, the final concentration of butanol was 28.2 g/l for a broth with 140 g/l of glucose. Solvents productivity and yield were, respectively, 11.7 g/l.h and 33.5 % for a sugar conversion of 95.6 %. Positive aspects about the flash fermentation process are the solvents productivity, the use of concentrated sugar solution and the final butanol concentration. The last two features can be responsible for a meaningful reduction in the distillation costs and result in environmental benefits due to lower quantities of wastewater generated by the process. © 2008 Berkeley Electronic Press. All rights reserved.

Análise de linguagens de modelagem de processos de um modelo de referência na cadeia de suprimentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento de ontologias empresariais para modelos de processos de negócio em BPMN, com aplicação em processos de software

Pós-graduação em Ciência da Computação - IBILCE

Estudo exploratório da integração de processos em uma instituição pública de ensino superior a partir das funcionalidades de um sistema de gestão de processos de negócio

Pós-graduação em Engenharia de Produção - FEB

Aplicação da gestão de processos em uma universidade pública do estado de São Paulo

Pós-graduação em Engenharia de Produção - FEB

Non-newtonian heat transfer on a plate heat exchanger with generalized configurations

For the configuration optimization of plate heat exchangers (PHEs), the mathematical models for heat transfer and pressure drop must be valid for a wide range of operational conditions of all configurations of the exchanger or the design results may be compromised. In this investigation, the thermal model of a PHE is adjusted to fit experimental data obtained from non-Newtonian heat transfer for eight different configurations, using carboxymethylcellulose solutions (CMC) as test fluid. Although it is possible to successfully adjust the model parameters, Newtonian and non-Newtonian heat transfer cannot be represented by a single generalized correlation. In addition, the specific heat, thermal conductivity and power-law rheological parameters of CMC solutions were correlated with temperature, over a range compatible with a continuous pasteurization process.

Photo-Fenton degradation kinetics of low ciprofloxacin concentration using different iron sources and pH

The aim of the present study was to compare the degradation kinetics of low (1 mg L-1) and high (25 mg L-1) concentrations of ciprofloxacin (CIP) aiming to decrease the concentration of additives and evaluate the pH limitation by the use of low iron concentrations and organic ligands. A parameterized kinetic model was satisfactorily fitted to the experimental data in order to study the performance of photo-Fenton process with specific iron sources (iron citrate, iron oxalate, iron nitrate) under different pH medium (2.5, 4.5, 6.5). The process modeling allowed selecting those process conditions (iron source, additives concentrations and pH medium) which maximize the two performance parameters related to the global equilibrium conversion and kinetic rate of the process. For the high CIP concentration, degradation was very influenced by the iron source, resulting in much lower efficiency with iron nitrate. At pH 4.5, highest TOC removal (0.87) was achieved in the presence of iron citrate, while similar CIP conversions were obtained with oxalate and citrate (0.98 after 10 min). For the low CIP concentration, much higher conversion was observed in the presence of citrate or oxalate in relation to iron nitrate up to pH 4.5. This behavior denotes the importance of complexation also at low dosages. Appropriate additives load (320 μM H 2O2; 6 μM Fe) resulted in a CIP conversion of 0.96 after10 min reaction with citrate up to pH 4.5. © 2013 Elsevier B.V. All rights reserved.

Modelagem plana industrial do vestuário: diretrizes para a indústria do vestuário e o ensino-aprendizado

Pós-graduação em Design - FAAC

Redução do volume de vinhaça através do processo de evaporação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento do processo de originação de etanol em uma empresa do setor de distribuição de combustíveis

The market segment of fuel distribution composes an important role in the development of Brazil’s industry and economy. However, it is a sector with intense competitiveness, especially in relation to ethanol. The search for competitive advantage and greater strength to the business are, therefore, of high relevance in this context, in which the concepts of Business Process Management has become more visible. Process Mapping, one of these concepts, has proven “TO BE”a strategic tool for companies which believe in flattening the structure and in the potential benefits that the improvement of its processes can provide. Thus, this work aims to map the process of Ethanol Origination of a company engaged in the distribution of this and other fuel products, and other niche markets. It was understood and designed the macro-process aforementioned and identified failures in subprocess related to it. After applying the method to select priority problems, using risk assessment criteria, five subprocess were identified to receive special action, which consisted in seeking improvements with those involved in the process, in representing its current and ideal models and in defining each department’s responsibilities for the activities in the subprocess proposed form. Thus, it is expected to mitigate mainly two negative effects found in the business: employee’s work overload and company's financial exposure

Prospecção de novos negócios numa indústria de autopeças: diagnóstico de falhas e sugestões de ferramentas para melhoria

The growth and expansion in auto parts market are directly related to the ability of a company to innovate and gain new customers, increasing its portfolio of customers and products. For this purpose the process of prospecting for new business has become a key process in companies seeking this goal, which requires teams and structures dedicated to it. Besides counting on available resources to carry out prospecting, it is necessary to properly manage the process as a whole, whose main result is a business proposal, which may lead to closer relations with the potential client and the activation of a new business. Process failures and difficulties to formulate a commercial proposal lead to documents produced without the quality needed that makes it harder to obtain new business. The objective of this study is to evaluate the process of new businesses quotation in the auto parts industry and indicate opportunities for improving this process. This goal is achieved by mapping the current process, from the diagnosis of problems and the indication of tools that can prevent or minimize the problems diagnosed. The information supporting this study were obtained by the bibliographical research, participant observation of the process, unstructured interviews with some of the involved people in the process and prospecting tools that can improve it. It results the mapping of new business quotation process, the points indicated as failures and difficulties in the process and the appointment of project management tools that can bring improvements to the new business proposals and pointing the moment for your application in the process

Classificação de workflows baseados em web services

Over the last decades changes have occurred in communication within and between enterprises, made easier by technologies suchas E-commerce, Internet, ERP systems and remote meetings and there was a rapid progress in network technology, which has changed the way business is done. A standardized way to offer services over the internet is using web services. Web services are a kind of remote procedure call and are generally used to integrate systems, independent of language, both client and server. It is common to use several web services run in sequence to perform a business process. To this type of process, gives the name of workflow. Thus, Web services are the primary components of workflows. A tool that provides a way of visualizing the behavior of a workflow can assist the administrator and is required. The present work presents the development of a tool that allows the administrator to classify visually services components and evaluate their importance in the final performance of a workflow. As proof of concept we used several virtual servers and computers where each computer has received a set of web services. A proxy was added between each call of workflows collecting relevant information and storing them in a database for later analysis. The analysis was based on Quality of Service parameters

Modelagem de processos de negócios: uma proposta no serviço de atendimento ao usuário da biblioteca da Unesp Guaratinguetá

This work is a study on the Technical Service Library and Documentation Prof. Carlos Alberto de Buarque Borges , on the Faculdade de Engenharia de Guaratinguetá , regarding to the service user , aiming to detect and analyze the current problems and suggesting improvements that could result in optimization of care and increased quality of services. For this, was chosen the methodology of Business Processes Modeling, which enabled the detailing of the processes implemented in the library and the identification the critical points , as low investment and short number of employees, which made possible suggest ways to improve the quality of service to users, as awareness campaigns and the implementation of an system to input the literature needed for each course