Estimativa da radiação solar global diária em função do potencial de energia solar na superfície do solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Heat transfer in fixed bed: a model non-linearity approach

Studies have been carried out on the heat transfer in a packed bed of glass beads percolated by air at moderate flow rates. Rigorous statistic analysis of the experimental data was carried out and the traditional two parameter model was used to represent them. The parameters estimated were the effective radial thermal conductivity, k, and the wall coefficient, h, through the least squares method. The results were evaluated as to the boundary bed inlet temperature, T-o, number of terms of the solution series and number of experimental points used in the estimate. Results indicated that a small difference in T-o was sufficient to promote great modifications in the estimated parameters and in the statistical properties of the model. The use of replicas at points of high parametric information of the model improved the results, although analysis of the residuals has resulted in the rejection of this alternative. In order to evaluate cion-linearity of the model, Bates and Watts (1988) curvature measurements and the Box (1971) biases of the coefficients were calculated. The intrinsic curvatures of the model (IN) tend to be concentrated at low bed heights and those due to parameter effects (PE) are spread all over the bed. The Box biases indicated both parameters as responsible for the curvatures PE, h being somewhat more problematic. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Condições de trabalho e transtornos mentais comuns em trabalhadores da rede básica de saúde de Botucatu (SP)

Os transtornos mentais comuns (TMC) apresentam elevada prevalência em populações gerais e de trabalhadores, com consequências individuais e sociais importantes. Este estudo, transversal e descritivo, explora a relação entre demandas psicológicas, grau de controle e presença de suporte social no trabalho e prevalência de TMC em trabalhadores da rede básica de saúde de Botucatu (SP). A coleta de dados foi feita por meio de questionário autoaplicável, não identificado, com destaque para itens relativos à demanda-controle-suporte e presença de TMC (Self Reporting Questionnaire, SRQ-20). As informações foram inseridas em banco de dados construído com Excel/Office XP 2003 e a análise estatística, efetuada com o programa SAS. Constatou-se que 42,6% dos trabalhadores apresentavam TMC. A observação de associação - alta prevalência de TMC com elevado desgaste (classificação de Karasek) e baixa prevalência de TMC com baixo desgaste - indica que, no município estudado, as condições de trabalho na atenção básica constituem fator contributivo não negligenciável ao adoecimento dos trabalhadores. Revela-se a necessidade de intervenções direcionadas ao cuidado aos trabalhadores, melhoria das condições de trabalho e aumento do suporte social no trabalho.

Initial analysis from a Lidar observation campaign of sugar cane fires in the central and western portion of the S̃ao Paulo State - Brazil

The central and western portion of the S̃ao Paulo State has large areas of sugar cane plantations, and due to the growing demand for biofuels, the production is increasing every year. During the harvest period some plantation areas are burnt a few hours before the manual cutting, causing significant quantities of biomass burning aerosol to be injected into the atmosphere. During August 2010, a field campaign has been carried out in Ourinhos, situated in the south-western region of S̃ao Paulo State. A 2-channel Raman Lidar system and two meteorological S-Band Doppler Radars are used to indentify and quantify the biomass burning plumes. In addiction, CALIPSO Satellite observations were used to compare the aerosol optical properties detected in that region with those retrieved by Raman Lidar system. Although the campaign yielded 30 days of measurements, this paper will be focusing only one case study, when aerosols released from nearby sugar cane fires were detected by the Lidar system during a CALIPSO overpass. The meteorological radar, installed in Bauru, approximately 110 km northeast from the experimental site, had recorded echoes (dense smoke comprising aerosols) from several fires occurring close to the Raman Lidar system, which also detected an intense load of aerosol in the atmosphere. HYSPLIT model forward trajectories presented a strong indication that both instruments have measured the same air masss parcels, corroborated with the Lidar Ratio values from the 532 nm elastic and 607 nm Raman N2 channel analyses and data retrieved from CALIPSO have indicated the predominance of aerosol from biomass burning sources. © 2011 SPIE.

Metodologias estatísticas na análise de germinação de sementes de mamona

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Influência dos defeitos cristalinos nas propriedades dielétricas e não-ôhmicas do 'CA' 'CU IND.3' 'TI IND.4' 'O IND.12'(CCTO)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Thermal and structural study of glasses in the binary system TeO2-Pb(PO3)(2)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Atenção Psicossocial e Psicologia: um mapeamento da produção científica

By the end of the 1970´s, begins the Psychiatric Reform Movement, whose development was the beginning of the construction of a new model, here termed Psychosocial Attention, to substitute the traditional psychiatric model. As such, aspires to be a process of paradigm shift and, therefore, requires transformations in the fields: theoretical-conceptual, technical-assistance, legal-political e sociocultural. This qualitative study composes a research which sought to ascertain the scientific production on the topic conducted by psychology, from the implementation of the Brazilian National Health System and the creation of new services to mental health care. In this sense, it proposed to investigate how the papers published in journals of psychology found in the database LILACS, since 1990, contribute to the process of building a new model that actually replace the so-called traditional psychiatric model.

A simple and non-destructive model for individual leaf area estimation in citrus

Introduction. Leaf area is often related to plant growth, development, physiology and yield. Many non-destructive models have been proposed for leaf area estimation of several plant genotypes, demonstrating that leaf length, leaf width and leaf area are closely correlated. Thus, the objective of our study was to develop a reliable model for leaf area estimation from linear measurements of leaf dimensions for citrus genotypes. Materials and methods. Leaves of citrus genotypes were harvested, and their dimensions (length, width and area) were measured. Values of leaf area were regressed against length, width, the square of length, the square of width and the product (length x width). The most accurate equations, either linear or second-order polynomial, were regressed again with a new data set; then the most reliable equation was defined. Results and discussion. The first analysis showed that the variables length, width and the square of length gave better results in second-order polynomial equations, while the linear equations were more suitable and accurate when the width and the product (length x width) were used. When these equations were regressed with the new data set, the coefficient of determination (R(2)) and the agreement index 'd' were higher for the one that used the variable product (length x width), while the Mean Absolute Percentage Error was lower. Conclusion. The product of the simple leaf dimensions (length x width) can provide a reliable and simple non-destructive model for leaf area estimation across citrus genotypes.

Non-destructive linear model for leaf area estimation in Vernonia ferruginea Less

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New physics from warped compact extra dimensions: from model building to colliders signals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)