Avaliação de sistemas de manejo em Nitossolo Vermelho distroférrico e na cultura do girassol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diretrizes para execução dos estudos geológico-geotécnicos e ambientais voltados à implantação de dutovias

Due to the new discoveries of oil and gas reservoirs, and also the increasing production of bio-fuels, the brazilian general pipeline system is being vertiginously extended. On the other hand, there is a lack of clear parameters that would allow a better utilization of the geological-geotechnical studies in the process of environmental licensing of pipeline systems. Therefore, this paper presents guidelines that would orientate the environmental licensing procedures to build pipeline systems, and also the geological-geotechnical studies that would support the characterization of the physical context. The method applied in this study consisted in the existing data survey and in their organization, analysis and review. In doing so, there is a well-subsidy integration of the many steps of the pipeline system implementation, the required environmental licenses and the investigation methods of the correlated physical context. As a result, it’s presented a flowchart of the guidelines, detailing the interaction between the environmental licensing, the geological-geotechnical studies and the phases of the pipeline’s project.

Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Anaerobic bio-digestion of concentrate obtained in the process of ultra filtration of effluents from tilapia processing unit

The objective of the present study was to evaluate the efficiency of the process of biodigestion of the protein concentrate resulting from the ultrafiltration of the effluent from a slaughterhouse freezer of Nile tilapia. Bench digesters were used with excrements and water (control) in comparison with a mixture of cattle manure and effluent from the stages of filleting and bleeding of tilapias. The effluent obtained in the continuous process (bleeding + filleting) was the one with highest accumulated population from the 37th day, as well as greatest daily production. Gases composition did not differ between the protein concentrates, but the gas obtained with the use of the effluent from the filleting stage presented highest methane gas average (78.05%) in comparison with those obtained in the bleeding stage (69.95%) and in the continuous process (70.02%) or by the control method (68.59%).

Cellulose-Based Bio- and Nanocomposites: A Review

Cellulose macro- and nanofibers have gained increasing attention due to the high strength and stiffness, biodegradability and renewability, and their production and application in development of composites. Application of cellulose nanofibers for the development of composites is a relatively new research area. Cellulose macro- and nanofibers can be used as reinforcement in composite materials because of enhanced mechanical, thermal, and biodegradation properties of composites. Cellulose fibers are hydrophilic in nature, so it becomes necessary to increase their surface roughness for the development of composites with enhanced properties. In the present paper, we have reviewed the surface modification of cellulose fibers by various methods. Processing methods, properties, and various applications of nanocellulose and cellulosic composites are also discussed in this paper.

Método multirresíduo para monitoramento de contaminação ambiental de pesticidas na região de Bauru (SP) usando mel como bio-indicador

The presence of residues of the major groups of pesticides (organohalogen, organophosphorous, pyrethroids and organonitrogen) in representative samples of honey produced in Bauru (state of São Paulo, Brazil) was investigated from 1999 through2004. A multiresidue method was applied to honey samples to determine 48 pesticides with recoveries ranging from 76 to 95%. The limits of detection found were lower than 10 µg/kg for GC-MS-SIM. The results indicated that most pesticides found in the samples belonged to the organohalogen and organonitrogen groups. Residues of malathion were detected in almost all of the samples in high concentration.

Biodiesel CO2 emissions: A comparison with the main fuels in the Brazilian market

The use of biodiesel is increasing as an attractive fuel due to the depleting fossil fuel resources and environmental degradation. This paper presents results of an investigation on the potentials of biodiesel as an alternative fuel and main substitute of diesel oil, comparing the CO2 emissions of the main fuels in the Brazilian market with those of biodiesel, in pure form or blended in different proportions with diesel oil (2%, 5%, and 20%, called B2, B5, and B20, respectively). The results of the study are shown in ton CO2 per m(3) and ton CO2 per year of fuel. The fuels were analyzed considering their chemical composition, stoichiometric combustion parameters and mean consumption for a single vehicle. The fuels studied were: gasoline, diesel oil, anhydrous ethyl alcohol (anhydrous ethanol), and biodiesel from used frying oil and from soybean oil. For the case of biodiesel, its complete life cycle and the closed carbon cycle (photosynthesis) were considered. With data provided by the Brazilian Association of Automotive Vehicle Manufacturers (ANFAVEA) for the number of vehicles produced in Brazil, the emissions of CO2 for the national fleet in 2007 were obtained per type of fuel. With data provided by the Brazilian Department of Transit (DENATRAN) concerning the number of diesel vehicles in the last five years in Brazil, the total CO2 emissions and the percentage that they would decrease in the case of use of pure biodiesel, B100, or several mixtures, B2, B5 and B20, were calculated. Estimates of CO2 emissions for a future scenario considering the mixtures B5 and B20 are also included in this article. Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

Experimental aspects of biomass fuels in a bubbling fluidized bed combustor

This work presents experimental information relevant to the combustion of biomass in a bubbling fluidized bed. The biomass distribution in a fluidized bed was studied through tests performed in a cold bed, while the volatiles released in the biomass pyrolysis, the burning rate of the resulting charcoal, and the combustion control regime, were studied through tests performed in a high temperature bed.Visual examination of photographs taken from a transparent walls bed, with a rectangular cross-section, showed that the large fuel particles, typical of biomass processing, were distributed in the bubbles, in the splash zone, and in the emulsion phase. The occurrence of biomass in the emulsion phase was favored by burning biomass particles of greater density and smaller size-expetimentally determined in each case. Decreasing the fuel particle size improved the biomass distribution inside the bed. The same was accomplished by increasing the superficial gas velocity as high as possible, compatibly with the acceptable elutriation.Burning tests showed that the biomass fuels have the advantage of reaching the diffusional regime at temperatures that can be lower than 1000 K, which ensures that the biomass fuels burn in a stable regime. (C) 2007 Elsevier B.V. All rights reserved.

Electrochemical Determination of Inorganic Contaminants in Automotive Fuels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A bio-economic appraisal of pair trawl fisheries off southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

STUDIES ON THE USE OF A FORMIC-ACID PROPIONIC-ACID MIXTURE (BIO-ADD(TM)) TO CONTROL EXPERIMENTAL SALMONELLA INFECTION IN BROILER-CHICKENS

Experiments were carried out on the antibacterial effects of a commercial formic acid-propionic acid mixture (Bio-add(TM)) against different Salmonella serptj pes. The preparation exerted a strong antibacterial effect on S. typhimurium strain F98 in artificially contaminated feed. After 28 days storage, the bactericidal effect was still considerable. When chickens were reared on feed that had been treated with Bio-add(TM) and artificially contaminated with different serotypes, S. enteritidis, S. typhimurium and S. agona were not isolated from the caecal contents, but S. infantis was. No organisms of this strain were isolated when a lower feed-contamination rate of bacteria was used.

A square-wave voltammetric method for analysing the colour marker quinizarine in petrol and diesel fuels

This work presents an electroanalytical method based on square-wave voltammetry (SWV) for the determination of quinizarine (QNZ) in a mixture of Britton-Robinson buffer 0.08 mol L-1 with 30% of acetonitrile. The QNZ was oxidized at glassy carbon electrode in and the well-defined peak at +0.45 V vs. Ag/AgCl can be used for its determination as colour marker in fuel samples. All parameters were optimized and analytical curves can be constructed for QNZ concentrations ranging from 2.0 x 10(-6) mol L-1 to 1.4 x 10(-5) mol L-1, using f = 60 Hz and E-sw = 25 mV. The method offers a limit detection of 4.12 x 10(-7) mol L-1 and a standard deviation of 4.5% when six measurements of 1.25 x 10(-5) mol L-1 are compared. The method was successfully applied for determining QNZ in gasoline and diesel oil and the obtained results showed good agreement with those reported previously. (c) 2006 Elsevier Ltd. All rights reserved.

A case study of compact cogeneration using various fuels

A method for studying the technical and economic feasibility of absorption refrigeration systems in compact cogenerators is presented. The system studied consists of an internal combustion engine, an electric generator and a heat exchanger to recover residual heat from the refrigeration water and exhaust gases. As an application, a computer program simulates the cogeneration system in a building which already has 75 kW of installed electric power. The maximum electric and refrigeration demands are 45 kW and 76 kW respectively. This study simulates the system performance, utilizing diesel oil, sugar cane alcohol and natural gas as possible fuels. (C) 1997 Elsevier B.V. Ltd.