Avaliação da integridade dos tecidos dérmico e epidérmico do casco de equinos colhidos pelo acesso trans-mural dorsal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização física de substratos à base de serragem e recipientes para crescimento de mudas de cacaueiro

O objetivo deste trabalho foi realizar caracterização física e avaliar o efeito de substratos à base de serragem e dois recipientes no crescimento de mudas de cacaueiro. O delineamento experimental foi em blocos casualizados, em esquema fatorial 2 x 4 x 2. Os tratamentos foram obtidos da combinação de serragens originadas de dois locais: municípios de Una e Camacan, no Estado da Bahia, quatro proporções (v:v) de serragem e areia: 1:0; 8:1; 4:1 e 2:1 e dois recipientes de crescimento (tubetes de 288 cm³ e sacos de polietileno de 840 cm³). Antes do plantio, amostras dos substratos foram retiradas para análises físicas. Foram usadas miniestacas de 4 a 6 cm de comprimento do clone Trinidad Select Hybrid (TSH 1188). Inicialmente, as miniestacas foram tratadas na base com AIB 6.000 mg kg-1, em seguida foram inseridas em tubetes preenchidos com os substratos e mantidas em câmara de nebulização. Após quarenta dias, as miniestacas foram retiradas da câmara e transferidas para crescimento, em casa de vegetação, onde parte foi mantida nos respectivos tubetes e outra transplantada em sacos de polietileno de 840 cm³ preenchidos com os mesmos tratamentos. Após cinco meses, em casa de vegetação, as mudas foram avaliadas quanto à altura da planta, diâmetro do caule, massa da matéria seca da parte aérea e das raízes, número de folhas e área foliar das plantas. Na análise física dos substratos, verificou-se que a distribuição do tamanho de partículas foi diferenciada entre as serragens e a proporção de areia. As densidades seca, úmida e de partícula aumentaram, enquanto o teor de matéria orgânica e a porosidade total foram reduzidos pela adição de areia às serragens. O transplante de miniestacas enraizadas de cacaueiro, clone TSH 1188, para sacos com substrato preparado com serragem coletada no município de Una-BA, nas proporções serragem:areia 4:1 e 2:1, possibilitou maior crescimento das plantas, sendo,portanto, recomendados para produção de mudas.

Effect of cooling procedure on final denture base adaptation

Well-fitted dentures prevent hyperplasic lesions, provide chewing efficiency and promote patient's comfort. Several factors may affect final adaptation of dentures, as the type of the acrylic resin, the flask cooling procedure and the water uptake. This investigation evaluated the effect of water storage and two different cooling procedures [bench cooling (BC) for 2 h; running water (RW) at 20 degreesC for 45 min] on the final adaptation of denture bases. A heat-cured acrylic resin (CL, Classico, Classico Artigos Odontologicos) and two microwave-cured acrylic resins [Acron MC, (AC) GC Dent. Ind. Corp.; Onda Cryl (OC), Classico Artigos Odontologicos] were used to make the bases. Adaptation was assessed by measuring the weight of an intervening layer of silicone impression material between the base and the master die. Data was submitted to ANOVA and Tukey's test (0.05). The following means were found: (BC) CL=0.72 +/- 0.03 a; AC=0.70 +/- 0.03 b; OC=0.76 +/- 0.04 c//(RW) CL= 1.00 +/- 0.11 a; AC=1.00 +/- 0.12 a; OC=0.95 +/- 0.10 a. Different labels join groups that are not statistically different (P > 0.05). Comparisons are made among groups submitted to the same cooling procedure (BC or RW). The conclusions are: interaction of type of material and cooling procedure had a statistically significant effect on the final adaptation of the denture bases (P < 0.05); water storage was not detected as a source of variance (P > 0.05) on the final adaptation.

Desenvolvimento e teste de nanocatalisadores a base de Pd para a redução de oxigênio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desequilíbrio de ligação e associação entre polimorfismos de base única com maciez da carne e espessura de gordura em bovinos Nelore utilizando painéis de alta densidade

Pós-graduação em Genética e Melhoramento Animal - FCAV

Estudo da formação de espumas cerâmicas à base de zircônio a partir do processo sol-gel

Pós-graduação em Química - IQ

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Comparación de la conductancia hidráulica dentinaria, de acuerdo al tiempo de aplicación de desensibilizantes con base de oxalatos

ABSTRACT. Introduction: an in vitro model was used to measure the hydraulic conductance in human dentin discs treated with oxalic acid for 15, 30 or 60 s maintaining the occlusive effect and measuring 7 and 14 days after application. Methods: 45 dentin discs measuring 1 mm thick were obtained from human third molars which were free of caries and in no occlusion; the samples were obtained from patients aged 16 to 30 years. Discs were sorted out into three study groups (n = 15) depending on the time of application of a commercial solution of oxalate-based dentin desensitizer (DD) (BisBlock®) which contains ˂ 5% oxalic acid of 1.5-1.8 pH: in group A the agent was applied for 15 s, in group B it was applied for 30 s, and in group C for 60 s. The hydraulic conductance of each disc was calculated after acid etching, which corresponds to the maximum permeability of discs (100%) after immediate application of oxalic acid, as well as seven and fourteen days of storage in saline solution. The statistical analysis was done with ANOVA test and post-hoc Games-Howell test. Results: 35,46 ± 23.41% in Group A, 36.34 ± 15.88% in Group B and 24.99 ± 14.99% in Group C, showing that the use of DD for 15, 30 or 60 s decreased permeability in a statistically significant manner (p <0.05). Conclusions: DD was effective in reducing hydraulic conductance regardless of application time, but this reduction was temporary only, since after seven days permeability returns to values close to those of baseline.

Ferramenta computacional para identificação de micro-organismos com base em assinaturas genômicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)