Tunnelling behaviour of the Asian subterranean termite in heterogeneous soils: presence of cues in the foraging area

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mandibular glands in reproductives of asian termite coptotermes gestroi (Isoptera: Rhinotermitidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identification and Analyses of Candidate Genes for Rpp4-Mediated Resistance to Asian Soybean Rust in Soybean

Asian soybean rust is a formidable threat to soybean (Glycine max) production in many areas of the world, including the United States. Only five sources of resistance have been identified (Resistance to Phakopsora pachyrhizi1 [Rpp1], Rpp2, Rpp3, Rpp4, and Rpp5). Rpp4 was previously identified in the resistant genotype PI459025B and mapped within 2 centimorgans of Satt288 on soybean chromosome 18 (linkage group G). Using simple sequence repeat markers, we developed a bacterial artificial chromosome contig for the Rpp4 locus in the susceptible cv Williams82 (Wm82). Sequencing within this region identified three Rpp4 candidate disease resistance genes (Rpp4C1-Rpp4C3 [Wm82]) with greatest similarity to the lettuce (Lactuca sativa) RGC2 family of coiled coil-nucleotide binding site-leucine rich repeat disease resistance genes. Constructs containing regions of the Wm82 Rpp4 candidate genes were used for virus-induced gene silencing experiments to silence resistance in PI459025B, confirming that orthologous genes confer resistance. Using primers developed from conserved sequences in the Wm82 Rpp4 candidate genes, we identified five Rpp4 candidate genes (Rpp4C1-Rpp4C5 [PI459025B]) from the resistant genotype. Additional markers developed from the Wm82 Rpp4 bacterial artificial chromosome contig further defined the region containing Rpp4 and eliminated Rpp4C1 (PI459025B) and Rpp4C3 (PI459025B) as candidate genes. Sequencing of reverse transcription-polymerase chain reaction products revealed that Rpp4C4 (PI459025B) was highly expressed in the resistant genotype, while expression of the other candidate genes was nearly undetectable. These data support Rpp4C4 (PI459025B) as the single candidate gene for Rpp4-mediated resistance to Asian soybean rust.

Molecular mapping of two loci that confer resistance to Asian rust in soybean

Asian soybean rust (ASR) is caused by the fungal pathogen Phakopsora pachyrhizi Sydow & Sydow. It was first identified in Brazil in 2001 and quickly infected soybean areas in several countries in South America. Primary efforts to combat this disease must involve the development of resistant cultivars. Four distinct genes that confer resistance against ASR have been reported: Rpp1, Rpp2, Rpp3, and Rpp4. However, no cultivar carrying any of those resistance loci has been released. The main objective of this study was to genetically map Rpp2 and Rpp4 resistance genes. Two F(2:3) populations, derived from the crosses between the resistant lines PI 230970 (Rpp2), PI 459025 (Rpp4) and the susceptible cultivar BRS 184, were used in this study. The mapping populations and parental lines were inoculated with a field isolate of P. pachyrhizi and evaluated for lesion type as resistant (RB lesions) or susceptible (TAN lesions). The mapping populations were screened with SSR markers, using the bulk segregant analysis (BSA) to expedite the identification of linked markers. Both resistance genes showed an expected segregation ratio for a dominant trait. This study allowed mapping Rpp2 and Rpp4 loci on the linkage groups J and G, respectively. The associated markers will be of great value on marker assisted selection for this trait.

Analysis of the workers head transcriptome of the Asian subterranean termite, Coptotermes gestroi

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of nozzle angle and air-jet parameters in air-assisted sprayer on biological effect of soybean asian rust chemical protection

Aiming at improving the efficiency control of Phakopsora pachyrhizi, this research evaluated different application techniques, using spray deposits and yield parameters of soybean crop. Two experiments were carried out in the experimental area of FCA/UNESP - Botucatu, SP, Brazil, in the soybean crop, Conquista variety, in the 2006/2007 season. The first experiment was arranged in random blocks with eight treatments and four replications. The treatments were conducted in factorial arrangement 4×2 (four air levels 0, 9, 11 and 29 km/h combined at two nozzle angles 0 and 30°) using AXI 110015 nozzles. Ten plants on each plot were selected for sampling spray deposits. Artificial targets were fixed on plants, two in the top and another two in the bottom part of plants (abaxial and adaxial leaf surface each one). For deposit evaluations, a cupric tracer was used and the amount of deposits was determined by a spectrophotometer. The second experiment was carried out in the same place and the treatments were of the same arrangement as the previous experiment, including control treatment (untreated plants). The spraying with triazole fungicide was realized in R2 and R5.2 growth stages of soybean with 142 l/ha spray volume. The nozzle angled of 30° combined with maximum air speed promoted the highest spray deposits on the soybean crop and influenced positively the control of the soybean Asian rust as well in the productivity of this crop.

Air-assistance and low volume application to control of asian rust on soybean crop

Currently, one of factors that cause the production cost increase of soybean crop is the pesticide application. The most important disease in soybean crop is Asian rust, caused by Phakopsora pachyrhizi Sydon & P. Sydon fungus, which can cause significant loss of the production. Therefore, this work aimed at evaluation of different spraying techniques on the spray deposits and some parameters of soybean crop: grain size, weight of 1 000 seeds and the crop productivity. Two experiments were carried out in the experimental area of FCA/UNESP (Faculdade de Ciencias Agronomicas/Universidade Estadual Paulista Julio de Mesquita Filho) - Botucatu, S P, Brazil, in soybean crop, Conquista variety, in the 2007/2008 season. In the first experiment, three air levels (0, 9 and 29 km/h of the air speed generated by fan) with flat fan nozzle XR 8002 with a spray volume of 130 l/ha were compared with a rotating nozzle - using low volume oily - LVO at 40 l/ha of spray volume. The second experiment was carried out under the same conditions as the previous experiment, including a control treatment (untreated plants). The disease severity was evaluated using a diagrammatic scale with a visual evaluation of the disease on 15 leaves of each plot. The grades varied between 0.6 and 78.5% of the disease severity. The use of air assistance when compared with the rotating system nozzle did not show significant differences for spray deposits on adaxial and abaxial surface of the leaves in bottom part of the plant. The air assistance with maximum air speed (29 km/h) increased the productivity with respect of the other treatments.

Dynamics of foraging and recruitment behavior in the Asian subterranean termite Coptotermes gestroi (Rhinotermitidae)

The present study investigated the trail-following behavior of the subterranean termite Coptotermes gestroi (Wasmann Rhinotermitidae) under laboratory conditions. The results showed that workers were the first to initiate the exploration to the food source. When food was discovered they returned to the nest laying a trail for recruiting nestmates to the food source. In this situation, workers always traveled significantly faster when returning from the arenas. Both workers and soldiers were recruited to the food source; however, the soldier/worker proportion was higher during the first phase of the recruitment. When no food was available, the number of recruited nestmates and the speed on their way back to the nest were significantly lower. The results also showed that scout foragers always laid trail pheromones when entering into unknown territories, and that chemical signals found in the food could induce workers of C. gestroi to increase their travel speed. Copyright © 2012 Alberto Arab et al.

Circulation of Different Lineages of Dengue Virus 2, Genotype American/Asian in Brazil: Dynamics and Molecular and Phylogenetic Characterization

The American/Asian genotype of Dengue virus type 2 (DENV-2) was introduced into the Americas in the 80′s. Although there is no data showing when this genotype was first introduced into Brazil, it was first detected in Brazil in 1990. After which the virus spread throughout the country and major epidemics occurred in 1998, 2007/08 and 2010. In this study we sequenced 12 DENV-2 genomes obtained from serum samples of patients with dengue fever residing in São José do Rio Preto, São Paulo (SJRP/SP), Brazil, in 2008. The whole open reading frame or envelope sequences were used to perform phylogenetic, phylogeographic and evolutionary analyses. Isolates from SJRP/SP were grouped within one lineage (BR3) close to isolates from Rio de Janeiro, Brazil. Isolates from SJRP were probably introduced there at least in 2007, prior to its detection in the 2008 outbreak. DENV-2 circulation in Brazil is characterized by the introduction, displacement and circulation of three well-defined lineages in different times, most probably from the Caribbean. Thirty-seven unique amino acid substitutions were observed among the lineages, including seven amino acid differences in domains I to III of the envelope protein. Moreover, we dated here, for the first time, the introduction of American/Asian genotype into Brazil (lineage BR1) to 1988/89, followed by the introduction of lineages BR2 (1998-2000) and BR3 (2003-05). Our results show a delay between the introduction and detection of DENV-2 lineages in Brazil, reinforcing the importance and need for surveillance programs to detect and trace the evolution of these viruses. Additionally, Brazilian DENV-2 differed in genetic diversity, date of introduction and geographic origin and distribution in Brazil, and these are important factors for the evolution, dynamics and control of dengue. © 2013 Drumond et al.

Effect of reduced fungicide doses on control of soybean Asian rust and bean yield

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

ASIAN SOYBEAN RUST INTEGRATED MANAGEMENT POTENTIAL: DISEASE SEVERITY, PLANT DEVELOPMENT AND YIELD COMPONENTS, CULTIVAR MG/BR-46 (CONQUISTA)

Soybean rust caused by Phakopsora pachyrhizi Sydow & P. Sydow is one of the major diseases of the soybean crop. The aim of this study was to evaluate the effects of sowing dates, plant populations and reduced doses of fungicides on soybean rust severity and its effects on plant development and yield, cultivar MG/BR46 (Conquista). Field experiments were conducted in the 2009/2010 and 2010/2011 harvests, under natural rust infestation of soybean rust. As from the appearance of the first disease symptoms, also began the fungicide spraying and the disease severity assessments. To understand the nature and extent of the effects of different treatments, a multivariate analysis of factors was applied. For the majority of the agronomic characters and factors, one-third to two-thirds of their variability can be explained by changes in plant populations or by differences in the fungicide treatments, and the remainder, was explained by sowing date variations. The fungicide treatments and sowing dates are determinants in disease severity and its interference on crop productivity. The characters of plant growth are more dependent on plant population variations. Treatments with azoxystrobina + ciproconazol promoted smaller disease severities, reflecting in productivity increase. The plant populations can be reduced up to 160.000 plants ha(-1) without losses in the disease control and the soybean yield. In general, the earliest sowings provided increase in the plant development, although the rust control was less efficient.

Educational and professional background and success in the labor market: the case of Portuguese immigrants in the Netherlands

The aim of this paper is to describe the relationship between educational and professional occupation trajectories of Portuguese immigrants in The Netherlands. To this end, the sample used comprises Portuguese immigrants that arrived in The Netherlands in two periods which represent the highest influx of immigrants: around the years 1966 and 2002. The analysis of the data shows a strong relationship between the level of professional education and the level of professional occupation. Furthermore, some exceptions to the generalizations found show that in service training may lead to an improvement of the possibilities to ascend regarding the level of professional occupation.

Sujeitos diaspóricos e negociações identitárias: o entre-lugar em Brazil-Maru e Sonhos Bloqueados

Pós-graduação em Letras - FCLAS

Controlling Asian soybean rust (Phakopsora pachyrhizi) with Bacillus spp. and coffee oil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)