Embalagem para armazenamento e transporte de ovos.

Embalagem para armazenamento e transporte de ovos compreendida por bandejas (1) apropriadas e submetidas à condição de vácuo parcial por meio de sacolas plásticas (5) com saches (2) sequestrantes de gás oxigênio, de maneira que a bandeja (1) permite, por meio de colunas (3) centrais, meios de sustentação para o empilhamento sem quebra de ovos (4), sendo ditas embalagens (1) recobertas por sacolas plásticas (5), sendo os saches sequestrantes (2) de 02 compostos com pó a base de óxido de ferro e silicato de alumínio com microporos adsorventes, de modo que a quantidade de saches é determinada em função do tempo de armazenagem e da quantidade de ovos embalados em uma unidade.

Estudo de uma ponte rolante comercial no transportede bobina de aço de 12 toneladas

This work aims to determine the stresses acting on the main beam of a crane to transport steel coils of up to twelve tons. To determine the stress it was made a revision of the knowledge of the mechanics of materials to apply the analytical method. Following a review of the finite element method is made to understand the same. To complete the study it was used the commercial software ANSYS to determine the stresses by finite element method, the program provides images that help to better understand the results obtained. With the results a comparison of the values of the tensions between the two methods (analytical and finite element) was made. To assist in the calculations it was used the NBR 8400, 1984 (Calculation of Lifting Equipment Load)

Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level

Estudo das propriedades de fotogeração e transporte de portadores de cargas em dispositivos optoeletrônicos orgânicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Logística e transporte na hidrovia Tietê-Paraná: custos e análise ambiental

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação das condições críticas para o surgimento de Aflatoxina na cadeia de processamento de amendoim (Arachis hypogaea L.)

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Estudo da eficiência de inibidores voláteis de corrosão para o aço Galvannealed

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de viabilidade econômica de um aterro sanitário para cidade de pequeno porte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise setorial: o caso da privatização do modal ferroviário brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise energética, exergética e ecológica da incorporação da produção de hidrogênio ao setor sucroalcooleiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da fotocapacitância em dispositivos MIS orgânicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do processo de fabricação no comportamento mecânico de rodas ferroviárias

Pós-graduação em Engenharia Mecânica - FEG

Standardization of metachromatic staining method of myofibrillar ATPase activity of myosin to skeletal striated muscle of mules and donkeys

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gerenciamento dos resíduos de serviços de saúde da Unidade de Terapia Intensiva do Pronto Socorro do Hospital das Clínicas da Faculdade de Medicina de Botucatu – UNESP

Health care waste (HCW) is the type of waste that results from activities performed in health care services during care provision to humans or animals. Presently, according to RDC 306/04, issued in 2004 by Anvisa, and Resolution no. 358/05, by CONAMA, waste groups have the following classification: Group A (biological waste), Group B (chemical waste), Group C (waste containing radionucleotides), Group D (common waste) and Group E (piercing and cutting waste). In Brazil, 149 tons of wastes are collected every day, and HCW corresponds to approximately 1% to 3 % of that total. An efficient way to adequately manage HCW is through the Health Care Waste Management Plan (HCWMP), and it is possible to reduce the risk posed by certain materials in addition to ensuring disposal in an ecologically correct and economical fashion. According to the Pan-American Health Organization (PAHO), the management process enables health care establishments to adequately manage waste. Hence, there is greater control and reduction in the health risks caused by infectious or special waste, in addition to facilitated recycling, treatment, storage, transport and final disposal of solid hospital waste in an environmentally safe fashion. To evaluate the management of HCW of Groups A and D from the Intensive Care Unit of the University Emergency Hospital - FMB - UNESP in the city of Botucatu according to the guidelines presently in force. The waste flow was followed up, and during four random days in the month of September 2011, waste was quantified by estimating daily and monthly values, according to its classification. : In 2011, the University hospital has produced an average of 57,676.8 kg/month of biological and common waste. By adding Groups A and D, during the four days, approximately 209.8 Kg of waste (202.2 Kg of Group A and 7.6 Kg of Group D) were produced in the establishment under study, which... (Complete abstract click electronic access below)

Avaliação dos gases de efeito estufa a partir do carvão

This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation