Facies analysis of tertiary alluvial fan deposits in the Jundiai region, São Paulo, southeastern Brazil

This article presents an analysis of facies of sedimentary sequences that occur as discontinuous bodies in the Jundiai region, west of the main Tertiary continental basins of the southeastern Brazil continental rift. Nine identified sedimentary facies, grouped into four associations, suggest the existence of an ancient alluvial fan system whose source area was the Japi mountain range (Serra do Japi). The deposits are considered Tertiary in age and chronocorrelated with those identified in the Atibaia region and at other sites up to 100 km east and northeast of Jundiai. The depositional model adopted to explain the filling of the basin proposes that the alluvial fans, which directly derive from the source area, terminated in a braided channel longitudinal to the basin axis that flowed to northwest, in a similar configuration to that of the present day. This basin may have extended to the Atibaia region or formed a set of small basins laterally contiguous to the faults associated with the rift. Such occurrences show that the formation of rift basins was broader than the area presently occupied by the main deposits. (c) 2005 Elsevier Ltd. All rights reserved.

Quaternary of the Pantanal, west-central Brazil

The Pantanal is a tectonic depression located at the left margin of the Upper Paraguay River. The Paraguay is the trunk river of an alluvial depositional tract composed by several large marginal alluvial fans, the Taquari fan being the largest one. The present landscape is a complex tropical wetland characterized by month-long floods every year, with geomorphic features derived from the present conditions and others inherited from successive Pleistocene and Holocene climates. Some areas containing ponds are landscape relicts generated by eolian deflation during the Last Glacial Maximum. Many ponds, closed depressions isolated from the superficial waters by vegetated crescent ridges of fine sands, were interpreted as salt pans bordered by lunette sand dunes. Initiation of the modern wetland has occurred during the Pleistocene/Holocene transition, with the change to a more humid climate and the individualization of lacustrine systems. Active tectonics has been playing an important role in the development of the Pantanal landscape. Nowadays, the Paraguay River meanders in a large flood plain with extensive swamp surfaces, being structurally constrained by faults in the west border of the basin. Sedimentation within the Pantanal wetland is also affected by tectonic activity, especially along faults associated with the Transbrasiliano Lineament. (C) 2003 Elsevier B.V. Ltd and INQUA. All rights reserved.

River avulsions on the Taquari megafan, Pantanal wetland, Brazil

The Pantanal wetland is located in a tectonically active interior sedimentary basin in west-central Brazil. The south-flowing Paraguay River is the trunk-river of an alluvial constructional landform comprising several large alluvial fans, the largest one of which is the Taquari megafan. The Taquari River flows in two distinct geomorphologic zones within the megafan. Entrenched on sediments of Pleistocene fan lobes, the Taquari River flows in a 3 to 5 km wide meander belt in the upper fan, where avulsion is hindered by entrenchment. Downstream of the intersection point, stream discharge progressively decreases and the Taquari River becomes narrow and shallow toward the Paraguay River plain. Within the distributary fan lobe, the channel-levee sandy complex is topographically higher than the adjacent floodplains and avulsion is a natural consequence of crevasses in the natural levees. Many channel avulsions have occurred during the last decades and documented cases show that significant channel changes may take place in a few years. Beginning with crevassing in 1988 and ending with the abandonment of the former channel in 1998, the river completely changed course in the lower fan. Presently, a major avulsion is occurring in the upper portion of the growing fan lobe, where many crevasses have appeared in the natural levees with associated splays onto the floodbasin. New anastomosed channels have formed north of the Taquari River, but downstream of them the flow is unconfined and the water spreads into natural floodbasins. This avulsion is still in process and allows observation of channel evolution, the geomorphic features produced, the sedimentary processes involved, and resulting effects. If the new channels do not rejoin the main channel, the river mouth may abandon its present master channel and shift to a position a hundred kilometers north from its present position. A large volume of sediment has been transferred to the floodbasin, with progradation of crevasse splay deposits over fine overbank sediments. Many geomorphic features, recognizable in satellite and radar images, clearly show that avulsion has occurred many limes before in the Taquari River. Avulsion belt deposits and former diverted channels testify to ancient avulsion events within the fan lobe and show that progradation of splays onto the floodbasin is the most important infilling process within the Taquari distributary fan lobe. The avulsion process in the lower Taquari River has accelerated in the last 30 years, along with the magnitude of flooding. Pasture and intensive agriculture in the catchment area has increased the sediment supply to the wetland, but larger floods are also a consequence of higher rainfall since 1973. Avulsion and floods have been a cause of great concern among the local population and landowners. Before human intervention in attempting to control floods, however, a better understanding of the avulsive river system is needed, especially because a major navigation project including the channelization of the Paraguay River was recently proposed. (c) 2005 Elsevier B.V. All rights reserved.

Influencia do soerguimento do alto Paranaiba na sedimentacao pos- basaltica na area do Triangulo Mineiro (MG), borda NNE da Bacia do Parana

Faciologic analysis method was applied to after-basaltic sedimentary deposits in Triangulo Mineiro (MG) area. Faciologic association 1 (Adamantina formation) and unities 1 to 5 (Uberaba formation) are related to the fluvial and lake deposits: faciologic association 3 (Ponte Alta Member) and 2 (Sierra da Galga Member) represent the sedimentary deposits associated to the alluvial fans conditions. With faciologic association and unities it could be to recognize the paleogeografic and tectonic conditions in sedimentation time of that depositional tract. -English summary

Aplicação do Índice Relaçáo Declividade-Extensão - RDE Na Bacia do Rio do Peixe (SP) para Detecção de Deformações Neotectô nicas

This paper presents the identification of tectonic deformation through the application of the stream-gradient index (slope x length) method in the Rio do Peixe hydrographic basin, located in western State of Sã o Paulo. The main principle used is that river valleys are the best tools for this type of analysis because of their fast adjustment to even the most gentle crustal deformations. This type of analysis for structural studies is extremely useful in the western region of the State of São Paulo, where deep chemical weathering results in a thick regolith and scarce outcrops. The stream length index is the ratio of the altimetric amplitude of each drainage and the natural logarithm of its length. The value obtained is plotted on maps at the median point of each drainage, allowing the drawings of lines with the same values (isodefs). Three anomalies (A, B and C) were identified along the Rio do Peixe valley representing uplift sectors indicated by the formation and distribution of Upper Quaternary deposits in terraces and modern fluvial plains and alluvial fans. In correlation with known tectonic data for this region it is possible to attribute the A and B anomalies to the Ribeirão Preto and Presidente Prudente crustal sutures, respectively. The smaller C anomaly needs further field investigation, but it could be associated with the Três Lagoas crustal suture. It must be emphasised that these sutures are inherited from the Precambrian Basement which had a strong influence on the Phanerozoic evolution in the whole sedimentary and volcanic stratigraphic pile of the Paraná Basin and on the dominant structural lineaments directions developed therein .The A, Band C anomalies are suggestive of renewed uplift as a result of neotectonic action in modern times.

Nova contribuiçao ao conhecimento da formação Rio Claro (T) na Folha Rio Claro (SP)

The Rio Claro Formation mainly occurs in the county of Rio Claro (SP) lying unconformably on Paleozoic and Mesozoic rocks. Its thickness is 30-40 m. It shows fine to coarse, regular to poor sorted, Triable sandstones and conglomerates with quartzite and quartz clasts in the base. Thin layers of mudstone occur interbeded. Stratigraphic maps had been elaborated in recent analyses allowing to improve the knowledge about the formation. The biggest thicknesses occur on the east part of the studied area. The coarse/fine clastic ratio map demonstrates that fine sediments are concentrated in the east side, and suggests the existence of barriers which conditioned perennial water body (or bodies) where decantation took place (east, south and southeast sides). The structural contour map of the Rio Claro Formation base indicates a NW/SE trough which was the main depositional axis. The integrated analysis demonstrates that the formation is formed by lacustrine, fluvial and debris flows deposits whose source area was located on NW side, with coalescent alluvial fans from where braided to psamitic meandering fluvial channels came. The location of the source area suggests no link with the Corumbataf River paleo-terraces.

O contato entre as formações Pirambóia e Botucatu na área de Ribeirão Preto (SP)

Em poços perfurados para captação de água subterrânea, na área urbana de Ribeirão Preto, foram encontrados arenitos grossos a conglomeráticos, subfeldspáticos, formando extensa camada com espessura média em torno de 30 metros. Estes arenitos têm sido considerados, em trabalhos mais recentes, como tendo sido depositados em leques aluviais, ao final da sedimentação da Formação Pirambóia, em diferentes áreas da região central e leste do Estado de São Paulo. Na área estudada, estes arenitos conglomeráticos, inseridos na porção extremo-superior da Formação Pirambóia, representam importante marco litoestratigráfico, pois assinalam o contato com a Formação Botucatu. Seu reconhecimento foi feito por meio de perfilagens geofísicas e da descrição de perfis geológicos de poços perfurados no município de Ribeirão Preto, uma vez que esta litofácies conglomerática não aflora na área. Palavras-chave: arenitos conglomeráticos; leques aluviais; perfilagens geofísicas; formações Pirambóia e Botucatu.

DISTRIBUIÇÃO DOS ARENITOS NA BACIA DE TAUBATÉ – SP.

A Bacia de Taubaté é caracterizada pela heterogeneidade geológica, herança da tectônica do tipo rifte, que dividiu a bacia em compartimentos e condicionou a sedimentação, constituída por depósitos de leques aluviais associados à planície aluvial e sedimentos lacustres do tipo playa-lake. A distribuição dos arenitos na bacia foi estudada com a interpolação 3D da fácies arenito, identificada através das informações dos perfis de poços. A interpolação não apenas distingue, em subsuperfície, os depósitos relacionados às formações Resende e Tremembé, como também constata zonalidades locais nos compartimentos. Ao relacionar as feições estruturais do rifte com a interpolação realizada para os arenitos, foi possível inferir a distribuição dos arenitos entre três grupos. O primeiro grupo relacionado à fase rifte, o segundo a um evento de transição bem representado no Compartimento São José dos Campos e o terceiro grupo aos sedimentos depositados durante o Neógeno até o Recente.

Sedimentação na bacia do Pantanal Mato-Grossense, Centro-Oeste do Brasil

The Pantanal is a Quaternary sedimentary basin located at the left margin of the Upper Paraguay River, west-central Brazil. Basin infilling was mainly by siliciclastic sediments and the stratigraphic succession exhibits an overall finingupward pattern. The depositional system tract is composed by a large meandering fluvial plain and several marginal alluvial fans, being the Taquari megafan the most striking feature. The present landscape is a complex tropical wetland, with geomorphic features derived from the present conditions and other inherited from successive Pleistocene and Holocene climates. During the Pleistocene, the sedimentary environment was dominated by braided alluvial fans, the original geometry of which is preserved as relict forms, permitting remarkable patterns of distributary paleochannels to be easily recognized in satellite images. Eolian processes were active in some abandoned lobes, contemporaneously with sedimentation in active fan lobes. Closed ponds bordered by lunette sand dunes, originally salt pans produced by eolian deflation, are relict eolian landforms in the Pantanal landscape. Eolian processes were probably more effective at the glacial maximum. Landscape has been changing in the Pantanal area since the end of the Pleistocene in adaptation to a more humid and warmer environment prevailing during Holocene. Initiation of the modern wetland has occurred during the Pleistocene / Holocene transition, with the change to a more humid climate and the individualization of lacustrine systems. The modern Pantanal wetland is a vast expanse of poorly drained lowlands that experiences annual flooding from summer to fall months. Although climatic fluctuations have occurred during all the Holocene, the alluvial fans have remained active depositional systems and lobes were formed by progradation and abandonment. Abandoned lobes were subjected... (Complete abstract click electronic address below)

Geomorfologia e evolução quarternária da calha do Alto Rio Paraná, no segmento livre de barramentos, entre os reservatórios de Porto Primavera e Itaipu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Formas, processos e evolução no padrão de canal meandrante em diferentes escalas geomorfológicas: o rio do Peixe, SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolução geomorfológica e palaeoambiental dos terraços da margem esquerda do alto rio Paraná

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Remote sensing analysis of depositional landforms in alluvial settings: Method development and application to the Taquari megafan, Pantanal (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Application of GPR in the study of a modern alluvial megafan: The case of the Taquari river in Pantanal wetland, West-Central Brazil

A novel and timely ground penetrating radar (GPR) survey has been carried out in Pantanal from Mato Grosso State, west-central Brazil. Fieldwork was carried out on February/2001 and August/2002 in an attempt to understand avulsion processes that are occurring within Taquari alluvial megafan. The main objectives were to map channel, crevasse and floodplain morphology, as well as active sedimentary bedforms. Many GPR profiles were acquired in the medium and lower Taquari River course. Subaqueous megaripples and exposed sand bars were identified in the medium fan area. Similar features were observed in the lower fan channels, where there were many crevasses in the marginal levees. During the flooding seasons, the flow splays out on to the floodplain, where new distributary channels are being formed. GPR data show that the lower fan, Taquari channel is topographically higher than the adjacent floodplain, thus favoring avulsion as a natural process of river course shifting. GPR data obtained during the wet and dry seasons, together with sedimentology information have been very important in characterizing the fluvial dynamics, and avulsion phenomena. © 2005 Springer Science+Business Media, Inc.

Blade design and forming for fans using finite elements

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.