Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride

Objective: This study evaluated the surface degradation effect of acidulated phosphate fluoride (APF) gel exposure on the glassy matrix ceramics as a function of time. Material and methods: Disc-shaped ceramic specimens (N = 120, 10/per ceramic material) were prepared in stainless steel molds (inner diameter: 5 mm, height: 2 mm) using 6 dental ceramics: 3 indicated for ceramic-fused-to-metal (Vita Omega 900, Carmen and Vita Titankeramik), 2 for all-ceramic (Vitadur Alpha and Finesse (R) Low Fusing) and 1 for both types of restorations (IPS d. SIGN). The specimens were wet ground finished, ultrasonically cleaned and auto-glazed. All specimens were subjected to calculation of percentage of mass loss, surface roughness analysis and topographical description by scanning electron microscopy (SEM) before (0 min) and after exposure to 1.23 % APF gel for 4 min and 60 min representing short-and long-term etching effect, respectively. The data were analyzed using two-way ANOVA with repeated measures and Tukey` s test (alpha=0.05). Results: Significant effect of the type of the ceramics (p=0.0000, p=0.0031) and exposure time (p=0.0000) was observed in both surface roughness and percentage of mass loss values, respectively. The interaction factor between both parameters was also significant for both parameters (p=0.0904, p=0.0258). Both 4 min (0.44 +/- 0.1-0.81 +/- 0.2 mu m) and 60 min (0.66 +/- 0.1 - 1.04 +/- 0.3 mu m) APF gel exposure created significantly more surface roughness for all groups when compared to the control groups (0.33 +/- 0.2-0.68 +/- 0.2 mu m) (p<0.05). There were no significant differences in percentage of mass loss between the ceramics at 4 min (p>0.05) but at 60 min exposure, IPS d. SIGN showed the highest percentage of mass loss (0.1151 +/- 0.11). The mean surface roughness for Vita Titankeramik (0.84 +/- 0.2 mu m) and Finesse (R) Low Fusing (0.74.+/- 0.2 mu m) was significantly higher than those of the other ceramics (0.59 +/- 0.1 mu m - 0.49 +/- 0.1 mu m) and Vita Titankeramik (p<0.05) regardless of the exposure time. A positive correlation was found between surface roughness and percentage of mass loss for all ceramic materials [(r=0.518 (Vitadur Alpha), r=0.405 (Vita Omega 900), r=0.580 (Carmen), r=0.687 (IPS d. SIGN), r=0.442 (Finesse (R) Low Fusing), r=0.572 (Vita Titankeramik), Pearson's correlation coefficient)]. The qualitative SEM analysis showed evidence of corrosive attack on all of ceramics at varying degrees. Conclusions: The ceramics indicated for either metal-ceramic or all-ceramic restorations were all vulnerable to surface texture changes and mass loss after short-term and long-term APF gel exposure.

Modelagem dinâmica temporal para a avaliação da disponibilidade hídrica e seus efeitos na sustentabilidade do sistema da sub-bacia do córrego do Boi Branco - SP

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Efeito de quatro tipos de mel na longevidade e reprodução de Catolaccus grandis (Hymenoptera:pteromalidae)

O trabalho teve como objetivo conhecer o melhor tipo de mel em relação à longevidade e fertilidade do parasitóide do bicudo-do-algodoeiro Catolaccus grandis. Adultos recém-emergidos foram transferidos para recipientes plásticos de 500mL, adaptados com tubo para fornecer água e umidade para os insetos. Um casal do parasitóide foi mantido em cada recipiente em câmara climatizada a 25±1°C, UR = 70±10% e fotoperíodo de 14h. O trabalho constou de 4 tratamentos: mel de flor de laranjeira; mel de flores de plantas silvestres; mel de cana-de-açúcar (todos produzidos por Apis mellifera) e mel de flores silvestres produzido por abelha Jataí (Tetragonistica angustula), com 15 repetições cada. Adultos recém-emergidos do parasitóide receberam cinco larvas de Euscepes postfasciatus encapsuladas em parafilm. Três gotículas de mel foram colocadas sobre o parafilm. Calculou-se a longevidade de machos e fêmeas, número de ovos dia-1 fêmea-1 e número total de ovos fêmea-1 e construíram-se as tabelas de fertilidade. As melhores dietas para alimentar adultos de C. grandis foram o mel silvestre e o de laranjeira. A melhor fecundidade foi observada na dieta de mel de laranjeira (101,60 ovos fêmea-1) e os melhores resultados para aumento reprodutivo e populacional deste parasitóide foram obtidos com mel de laranja e com mel silvestre.

Efeitos de concentrações crescentes de lidocaína hiperbárica, administradas no espaço subaracnóideo, sobre a medula espinhal e as meninges: estudo experimental em cães

JUSTIFICATIVA E OBJETIVOS: Ainda não está bem estabelecida a concentração de lidocaína que é potencialmente capaz de determinar lesão no tecido nervoso. O objetivo desta pesquisa foi estudar os efeitos sobre a medula espinhal e as meninges, de concentrações crescentes de lidocaína administrada por via subaracnóidea, em injeção única através de agulha de Quincke. MÉTODO: Após a aprovação da Comissão de Ética em Experimentação Animal, 40 cães adultos foram anestesiados com fentanil e etomidato e submetidos a punção subaracnóidea com agulha de Quincke 22G 21/2 para introdução de 1 mL, em 10 segundos, de solução glicosada a 7,5% - Grupo 1; lidocaína a 5% em solução glicosada a 7,5% - Grupo 2; lidocaína a 7,5% em solução glicosada a 7,5% - Grupo 3; lidocaína a 10% em solução glicosada a 7,5% - Grupo 4. Após a recuperação da anestesia venosa, foram observados, no período em que os animais estavam em vigência do bloqueio subaracnóideo, a presença de bloqueio motor, o tônus do esfíncter anal (normal ou relaxado) e o nível de bloqueio sensitivo nos diferentes dermátomos das regiões cervical, torácica, lombar e sacral. Os animais permaneceram em cativeiro por 72 horas. Foram avaliados o tônus do esfíncter anal, a motricidade das patas posteriores, a sensibilidade dolorosa nas patas anteriores e posteriores e nos dermátomos sacrais, lombares e torácicos. Após serem sacrificados por eletrocussão sob anestesia, foram retiradas porções lombar e sacral da medula espinhal e das meninges para exame histológico por microscopia óptica. RESULTADOS: Nenhum animal dos Grupos 1 e 2 apresentou lesões clínicas ou histológicas. Três animais do Grupo 3 apresentaram alterações motoras nas patas posteriores e relaxamento do esfíncter anal. Nestes, foram observados focos de necrose na região posterior (dois cães) e necrose em faixa em toda a superfície medular (um cão). em um outro animal deste grupo, no qual foram notados focos de necrose, em área inferior a 5% do campo histológico não foram encontradas alterações clínicas. Sete animais do Grupo 4 apresentaram alterações clínicas (paralisia ou diminuição de força muscular nas patas posteriores, relaxamento do esfíncter anal) e histológicas (necrose na faixa da superfície medular ou focos de necrose de tecido nervoso). CONCLUSÕES: Neste estudo, a lidocaína em concentrações superiores a 7,5%, em injeção única, administrada no espaço subaracnóideo por meio de agulha de Quincke, determinou alterações histológicas sobre a medula espinhal, mas não sobre as meninges.

Effect of Airborne-Particle Abrasion and Mechanico-Thermal Cycling on the Flexural Strength of Glass Ceramic Fused to Gold or Cobalt-Chromium Alloy

Purpose: To evaluate the effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of a ceramic fused to cobalt-chromium alloy or gold alloy.Materials and Methods: Metallic bars (n = 120) were made (25 mm x 3 mm x 0.5 mm): 60 with gold alloy and 60 with Co-Cr. At the central area of the bars (8 mm x 3 mm), a layer of opaque ceramic and then two layers of glass ceramic (Vita VM13, Vita Zahnfabrick) were fired onto it (thickness: 1 mm). Ten specimens from each alloy group were randomly allocated to a surface treatment [(tungsten bur or air-particle abrasion (APA) with Al(2)O(3) at 10 mm or 20 mm away)] and mechanico-thermal cycling (no cycling or mechanically loaded 20,000 cycles; 10 N distilled water at 37 degrees C and then thermocycled 3000 cycles; 5 degrees C to 55 degrees C, dwell time 30 seconds) combination. Those specimens that did not undergo mechanico-thermal cyclingwere stored inwater (37 degrees C) for 24 hours. Bond strength was measured using a three-point bend test, according to ISO 9693. After the flexural strength test, failure types were noted. The data were analyzed using three factor-ANOVA and Tukey's test (alpha = 0.05).Results: There were no significant differences between the flexural bond strength of gold and Co-Cr groups (42.64 +/- 8.25 and 43.39 +/- 10.89 MPa, respectively). APA 10 and 20 mm away surface treatment (45.86 +/- 9.31 and 46.38 +/- 8.89 MPa, respectively) had similar mean flexural strength values, and both had significantly higher bond strength than tungsten bur treatment (36.81 +/- 7.60 MPa). Mechanico-thermal cycling decreased the mean flexural strength values significantly for all six alloy-surface treatment combinations tested when compared to the control groups. The failure type was adhesive in the metal/ceramic interface for specimens surface treated only with the tungsten bur, and mixed for specimens surface treated with APA 10 and 20 mm.Conclusions: Considering the levels adopted in this study, the alloy did not affect the bond strength; APA with Al(2)O(3) at 10 and 20 mm improved the flexural bond strength between ceramics and alloys used, and the mechanico-thermal cycling of metal-ceramic specimens resulted in a decrease of bond strength.

Avaliação da liberação de íon fluoreto de cimentos ionoméricos antes e após a recarga e com proteção da superfície

Objective: To evaluate fluoride ion release from two anhydrous glass ionomer cements (GICs) and two resin-modified GICs (RMGICs) before and after recharge with 2% neutral sodium fluoride for 4 min and after surface protection of the Maxxion R GIC with an adhesive system, a cavity varnish and a colorless nail polish. Method: A stainless steel 2x6 mm matrix was used for fabricating 5 specimens of each material, which were immersed in 5 mL of deionized water, renewed every 24 h. Measurements with a potentiometer were performed on days 1, 2, 9 and 17, in the 1st and 2nd phases, and the specimens were buffered with a TISAB III solution. In the 2nd phase, the specimens were subjected to recharge and immersed again in 5 mL of deionized water. In the 3rd phase, the GIC surfaces were protected and readings were made at 5 min, 24 h, 48 h and 72 h. Tukey's post-hoc and Student's t tests were used for statistical analyses (p<0.05). Results: There was statistically significant difference in the comparison between the 1st and 2nd phases for all materials, except at day 2 for Vidrion R and VitroFil LC. In the 3rd phase, it was observed that for all materials, comparison of the first 5 min with the other times revealed statistically significant differences among the means of fluoride ion release. In the comparison with the other times, both the varnish and the colorless nail polish presented statistically significant difference between 24 and 48 h as well as between 24 and 72 h. Conclusion: The anhydrous GICs were more effective in fluoride ion release and recharge compared with the RMGICs. Maxxion R presented a homogeneous and statistically significant behavior in both phases. All materials for surface protection were efficient and the colorless nail polish had the best behavior.

Atividade de enzimas digestivas de Lithobates catesbeianus durante o desenvolvimento larval

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência dos corantes Azul de Metileno a 2% e Rodamina B a 2% na determinação da capacidade seladora apical de diferentes cimentos endodônticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modificação de superfície empregando-se laser e recobrimento de implantes dentários de titânio com apatitas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resposta da bananeira Prata-Anã, à aplicação de zinco e boro no rizoma

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Decoration of Ti/TiO2 Nanotubes with Pt Nanoparticles for Enhanced UV-Vis Light Absorption in Photoelectrocatalytic Process

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The interaction between atoms of Au and Cu with clean Si(111) surface: A study combining synchrotron radiation grazing incidence X-ray fluorescence analysis and theoretical calculations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nitrogen Supply for Cover Crops and Effects on Peanut Grown in Succession under a No-Till System

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fractal behavior throughout stretch zone of 15-5PH steel under elastic-plastic loading conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of aromatic amines in surface waters receiving wastewater from a textile industry by liquid chromatographic with electrochemical detection

A high performance liquid chromatography ( HPLC) method with electrochemical detection (ED) was developed for the determination of benzidine, 3,3-dimethylbenzidine, o-toluidine and 3,3-dichlorobenzidine in the wastewater of the textile industry. The aromatic amines were eluted on a reversed phase column Shimadzu Shimpack C-18 using acetonitrile + ammonium acetate (1 x 10(-4) mol L-1) at a ratio 46: 54 v/v as mobile phase, pumped at a flow rate of 1.0 mL min(-1). The electrochemical oxidation of the aromatic amines exhibits well-defined peaks at a potential range of +0.45 to +0.78 V on a glassy carbon electrode. Optimum working potentials for amperometric detection were from 0.70 V to +1.0 V vs. Ag/AgCl. Analytical curves for all the aromatic amines studied using the best experimental conditions present linear relationship from 1 x 10(-8) mol L-1 to 1.5 x 10(-5) mol L-1, r = 0.99965, n = 15. Detection limits of 4.5 nM (benzidine), 1.94 nM (o-toluidine), 7.69 nM (3,3-dimethylbenzidine), and 5.15 nM (3,3-dichlorobenzidine) were achieved, respectively. The detection limits were around 10 times lower than that verified for HPLC with ultra violet detection. The applicability of the method was demonstrated by the determination of benzidine in wastewater from the textile industry dealing with an azo dye processing plant.