Relative potency of ketamine and S(+)-ketamine in dogs

The aim of this study was to determine the relative potency of racemic ketamine and S(+)-ketamine for the hypnotic effect and to evaluate the clinical anesthesia produced by equianesthetic doses of these two substances in dogs. One hundred and eight dogs were allocated in groups R2, R2.5, R3, R6, R9, R12, S2, S2.5, S3, S6, S9, and S12, to receive by intravenous route 2, 2.5, 3, 6, 9, and 12 mg/kg of ketamine or S(+)-ketamine, respectively. A dose-effect curve was drawn with the dose logarithm and the percentage of dogs that presented hypnosis in each group. The curve was used to obtain a linear regression, to determine the effective doses 100 and the potency relationship. In another experimental phase, eight groups of five dogs received 3, 6, 9 and 12 mg/kg of ketamine or S(+)-ketamine to evaluate the periods of latency, hypnosis, and total recovery. The times in which the dogs reached the sternal position, attempted to stand up for the first time, recovered the standing position, and started to walk were also recorded. The hypnotic dose for ketamine was 9.82 +/- 3.02 (6.86-16.5) mg/kg and for S(+)-ketamine was 7.76 +/- 2.17 (5.86-11.5) mg/kg. The time of hypnosis was longer in R3 and the first attempt to stand up occurred early in R6 when compared with S3 and S6 respectively. When R9 (100% of hypnosis with ketamine) and S6 [100% of hypnosis with S(+)-ketamine] were compared (1:1.5 ratio), the time to sternal position (12 +/- 2.5 and 20.2 +/- 5.6 min respectively) and the total recovery time (45 +/- 5.5 and 60.2 +/- 5.2 min respectively) were significantly shorter with S(+)-ketamine. It was concluded that the potency ratio between ketamine and S(+)-ketamine in dogs is smaller than the one reported in other species, and that the dose obtained after a reduction of 50%, as usually performed in humans, would not be enough to obtain equianesthetic effects in dogs.

Efeito do conteúdo de água e da compactação do solo na produção de soja

A compactação do solo tem sido fator físico limitante ao crescimento das plantas. Este trabalho objetivou avaliar a produção de soja (Glycine max cv. Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48) em razão do conteúdo de água e da compactação do solo. Usou-se o delineamento inteiramente casualizado, em esquema fatorial 4x2, ou seja, quatro níveis de resistência à penetração (entre 0,27 e 4,32 MPa) e dois níveis de retenção de água pelo solo (0,05 e 0,01 MPa). Foram utilizadas amostras de Latossolo Vermelho textura média (LVd) e Latossolo Vermelho textura argilosa (LVef), coletadas na profundidade de 020 cm, passadas em peneira de 0,4 cm e compactadas em camadas de 3 cm, em vasos de 20 cm de altura e 25 cm de diâmetro (9,82 L). Os níveis de resistência à penetração foram determinados com o penetrômetro de anel dinamométrico. O nível crítico de resistência do solo à penetração, em relação à produção de grãos, foi de 1,66 e 2,22 MPa, no LVd, e 3,05 e 2,81 MPa, no LVef, para o conteúdo de água retida na tensão de 0,05 e 0,01 MPa, respectivamente. A maior produção de grãos foi obtida na tensão de 0,01 MPa. A produção de grãos de soja é afetada em níveis críticos de resistência do solo à penetração superiores a 2 MPa em latossolos com conteúdo de água retida na tensão de 0,01 MPa.

Estudo do comportamento da PIO de 24 horas e frequência de glaucoma em pacientes com síndrome da apnéia obstrutiva do sono

Purpose: To determine the frequency of glaucoma and evaluate the behavior of 24-hour intraocular pressure in patients with the obstructive sleep apnea syndrome (OSAS). Methods: Eleven consecutive patients with OSAS, diagnosed by polysonography, were avaliated in a cross-sectional study. Demographic data were analyzed: age, sex, race/color, weight, height and associated diseases. The patients were submitted to complete ophthalmologic examination, including the visual field, as well as to 24-hour intra-ocular pressure (IOP) evaluation by an applanation tonometer at 9h, 12h, 15h, 18h, 24h and 6h in the lying and sitting positions. The diagnostic criterion for glaucoma was alteration of the visual field (VF) compatible with glaucoma and one or more of the following alterations: cup-disc ratio >= 0.7, hemorrhage, wedge-shaped defect, bayonet-shaped vessels, Hoyt's sign, asymmetry > than 0.2 between cup/disc ratio of the eyes. The angle should be opened without alterations. Results: 9 (82%) of 11 patients showed glaucoma or were suspected to have glaucoma, 9% of which exhibited normal tension glaucoma and 73% were suspected to have glaucoma for presenting alterations in the optic nerve or ocular hypertension. The mean for the IOP values of the 11 patients was observed to be the highest at 6 o'clock, when they were lying down. Variations of IOP >= 5 mmHg occurred in 7 (64%) of the patients, and variations of up to 14 mmHg and IOP peaks of up to 32 mmHg were observed. Conclusion: OSAS may be an important risk factor for the development of glaucoma, particularly that of normal tension glaucoma. Patients with OSAS must be referred to an ophthalmologist and those professionals must be attentive to the association of sleep disorders in patients with open-angle glaucoma.

The effect of implant design on insertion torque and immediate micromotion

Objectives: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. Material and methods: Thirty-six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non-fluted (no cutting groove, solid screw-form); (2) fluted (901 cut at the apex, tap design); and (3) Blossomt (Patent pending) (non-fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 901 by a digital torque gauge. Controlled lateral loads of 10N followed by increments of 5 up to 100N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two-way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. Results: While insertion torque increased as a function of number of turns for each design, the slope and final values increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- standard deviation [SD] = 64.1 +/- 26.8, 139.4 +/- 17.2, and 205.23 +/- 24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- SD 530 +/- 57.7, 585.9 +/- 82.4, and 782.33 +/- 269.4 mm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossomt, fluted and non-fluted design groups, respectively. Conclusion: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque.

Biologia de Iphiseiodes zuluagai Denmark & Muma (Acari: Phytoseiidae)

Iphiseiodes zuluagai Denmark & Muma (Acari: Phytoseiidae) é um ácaro predador comumente encontrado em plantas cítricas (Citrus spp.). Alimentado com pólen de mamoneira (Ricinus communis ) e a 25 ± 2°C, 70 ± 10% de UR e 14 horas de fotofase, a maioria das larvas eclodiu entre 12 e 24 horas. A duração do estágio de larva foi freqüentemente em torno de 24 horas, e a duração das fases de protoninfa e deutoninfa entre 24 e 48 horas. O ciclo de ovo a adulto durou 5 a 6 dias. A estimativa da capacidade inata de crescimento da população (r m) foi 0,122 fêmeas/ fêmea/ dia; a duração média de uma geração (T) 18,7 dias; a taxa líquida de reprodução (Ro) 9,82 fêmeas/ fêmea e a razão finita de aumento (1)1,13.

Thermistor behaviour and electric conduction analysis of Ni-doped niobate ferroelectric: the role of multiple beta parameters

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Composição química, digestibilidade e produção de gases in vitro de três espécies forrageiras tropicais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento fino de qtls e polimorfismos de genes candidatos associados ao crescimento no cromossomo 1 da galinha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da compactação do solo e do conteúdo de água nas características agronômicas de soja e arroz de sequeiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Description and performance of track and primary-vertex reconstruction with the CMS tracker

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For t (t) over bar events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p(T) > 0.9GeV is 94% for pseudorapidities of vertical bar eta vertical bar < 0.9 and 85% for 0.9 < vertical bar eta vertical bar < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p(T) = 100GeV emitted at vertical bar eta vertical bar < 1.4, the resolutions are approximately 2.8% in p(T), and respectively, 10 m m and 30 mu m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10-12 mu m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.

Clinical and pathological assessment of 82 patients with cardiovascular diseases undergoing autopsy at the Hospital das Clínicas of the Faculdade de Medicina de Botucatu from 1988 to 1993

OBJECTIVE: To evaluated the clinical diagnostic, efficiency for basic death causes in patients dying of circulatory disease and de relative frequency of those diseases. METHODS: Analysis of medical record data of 82 patients, ages from 16 to 84 years old (68 over 40 years old), whose died of circulatory disease and had undergone necropsy in the period from 1988 to 1993 years in the University Hospital of Medicine Faculty of Botucatu-UNESP, Br. RESULTS: The functional class of patients were III or IV, in 78%, and 81.7% needed urgent hospitalization. By the clinical judgment the death were by ischemic heart disease in 32 (21 acute myocardial infarction), Chagas'disease in 12, valvopathy in 11, cardiomyopathy in 7, heart failure with no specification of cardiopathy in 11 and other causes in 9. At the necropsy the death cause was ischemic heart disease in 34 patients, valvopathy in 10, Chagas'disease in 10, cardiomyopathy in 5, and heart failure with no specification of cardiopathy in 2.The concordance taxes were in thhe same order: 94,6%, 90,0%, 83.3%, 71.4% and 28.5%. CONCLUSION: There was a great efficiency of clinical diagnosis for death cause in a general university hospital. The ischemic heart disease were the main causes of death.

Caracterização histoquímica do colágeno e expressão de MMP-2, MMP-9 e TIMP-1 nas endometrites crônicas das éguas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)