Windrowing and cylindrical baling of sugar cane vegetal residues: Some operational parameters and energetic efficiency

The objective of this study was to analyze the sugar cane vegetal residues collection, as well as determining its energetic potential, using a rake and cylindrical baler, both from NEW HOLLAND® under two different windrowing process (simple and double). The field tests were carried out in an area that belongs to COSTA PINTO MILL (COSAN® Group) in the city of Piracicaba, Sao Paulo State, Brazil. The geographic location of the area is: Latitude 22°4030'S, Longitude 47°3633'W and altitude of 605m. From the trash analysis, before the baling, the following average results were obtained: 69.93% of leaves; 2.27% of stalks fractions; 21.44% of tops and 6.36% of total strange matter. The estimated residues yield was 27.01 tons.ha -1 with a gross heat of 18.43 MJ.kg-1, low heat of 17.01 MJ.kg-1, useful heat of 13.32 MJ.kg-1, average moisture of 20.76% and an energetic potential of 494,875.09 MJ.ha-1. In the windrowing operations (simple and double) the averages of the 5 out of 13 analyzed variable presented differences between them in a 1% level of significance in the Tukey Test. The averages comparison of the results for bale's specific mass and the effective capacities (ton.h-1) e (ha.h-1) had been significant at a 5% level in the Tukey Test. The comparisons of the averages for the results had been significant to 1% level. The strange matter averages of the bales did not differed between them.

Orbital Implants Insertion to Improve Ocular Prostheses Motility

The objectives of this study were, through a literature review, to point the differences between orbital implants and their advantages and disadvantages, to evaluate prosthesis motility after orbital implants are inserted, and to point the implant wrapping current risks. Sixty-seven articles were reviewed. Enucleation implants can be autoplastics or alloplastics and porous (including natural and synthetic hydroxyapatite [HA]) or nonporous (silicone). Hydroxyapatite is the most related in the literature, but it has disadvantages, too, that is, all orbital implants must be wrapped. Exposure of the porous orbital implant can be repaired using different materials, which include homologous tissue, as well as autogenous graft, xenograft, and synthetic material mesh. The most used materials are HA and porous polyethylene orbital implant. The HA implant is expensive and possibly subject corals to damage, different from porous polyethylene orbital implants. Porous implants show the best prosthesis motility and a minimum rate of implants extrusion. Implant wraps can facilitate smoother entry of the implant into the orbit and allow reattachment of extraocular muscles. They also serve as a barrier between the overlying soft tissue and the rough surface of the implant, protecting implants from exposure or erosion.

Influence of Ridge Inclination and Implant Localization on the Association of Mandibular Kennedy Class I Removable Partial Denture

The aim of this study was to evaluate the tendency of displacement of the supporting structures of the distal extension removable partial denture (DERPD) associated to the implant with different inclinations of alveolar ridge and implant localizations through a two-dimensional finite-element method. Sixteen mandibular models were fabricated, presenting horizontal, distally descending, distally ascending, or descending-ascending ridges. All models presented the left canine and were rehabilitated with conventional DERPD or implant-retained prosthesis with the ERA system. The models were obtained by the AutoCAD software and transferred to the finite-element software ANSYS 9.0 for analysis. A force of 50 N was applied on the cusp tips of the teeth, with 5 points of loading of 10 N. The results were visualized by displacement maps. For all ridge inclinations, the assembly of the DERPD with distal plate retained by an anterior implant exhibited the lowest requisition of the supporting structures. The highest tendency of displacement occurred in the model with distally ascending ridge with incisal rest. It was concluded that the association of the implant decreased the displacement of the DERPD, and the anterior positioning of the implant associated to the DERPD with the distal plate preserved the supporting structures for all ridges.

Socio-behavioral factors influence prevalence and severity of dental caries in children with primary dentition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Expression of interferon-gamma, interferon-alpha and related genes in individuals with Down syndrome and periodontitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of light-curing units on microleakage under dental composite resins

The aim of this study was to determine the effect of two light-curing units (QTH and LED) on microleakage of Class II composite resin restorations with dentin cavosurface margins. Twenty extracted mandibular first premolars, free of caries and fractures were prepared two vertical slot cavities in the occluso-mesial and -destal surfaces (2 mm buccal-lingually, 2 mm proximal-axially and cervical limit in enamel) and divided into 4 equal groups (n = 8): GI and GII: packable posterior composite light-activated with LED and QTH, respectively; GIII and GIV: micro-hybrid composite resin light-activated with LED and QTH, respectively. The composite resins were applied following the manufacturer's instructions. After 24 h of water storage specimens were subjected to thermocycling for a total of 500 cycles at 5 and 55A degrees C and the teeth were then sealed with impermeable material. Teeth were immersed in 0.5% Basic fuchsin during 24 h at room temperature, and zero to three levels of penetration score were attributed. The Mann-Whitney and Kruskal-Wallis tests showed significant statistically similar (P > 0.05) from GI to GII and GIII to GIV, which the GII (2.750) had the highest mean scores and the GIII and GIV (0.875) had lowest mean scores. The use of different light-curing units has no influence on marginal integrity of Class II composite resin restorations and the proprieties of composite resins are important to reduce the microleakage.

Topological charge screening and pseudoscalar glueballs

Topological charge screening in the QCD vacuum is found to provide crucial nonperturbative contributions to the short-distance expansion of the pseudoscalar (0-+) glueball correlator. The screening contributions enter the Wilson coefficients and are an indispensable complement to the direct instanton contributions. They restore consistency with the anomalous axial Ward identity and remedy several flaws in the 0-+ glueball sum rules caused by direct instantons in the absence of screening (lack of resonance signals, violation of the positivity bound and of the underlying low-energy theorem). The impact of the finite width of the instanton size distribution and the (gauge-invariant) renormalization of the instanton contributions are also discussed. New predictions for the 0-+ glueball mass and decay constant are presented.

Correlação linear e espacial entre o rendimento de grãos do feijoeiro e a resistência mecânica à penetração em um Latossolo Vermelho distrófico

A resistência mecânica à penetração apresentada pelo solo exerce grande influência sobre o desenvolvimento vegetal, uma vez que o crescimento das raízes, assim como o rendimento das culturas, varia de forma inversamente proporcional ao seu valor. No ano agrícola de 2001/2002, na Fazenda Experimental de Ensino e Pesquisa da Faculdade de Engenharia/UNESP - Campus de Ilha Solteira, foram analisados o rendimento de grãos do feijoeiro (PG) e a resistência mecânica à penetração (R), de um Latossolo Vermelho distrófico. O objetivo foi apurar diretrizes relacionadas com o aumento da produtividade agrícola em questão, estudando a correlação linear e a espacial entre a PG e a R. Foi instalada uma rede geoestatística para a coleta dos dados do solo e da planta, estabelecida com espaçamentos de 5 x 5 m e 2,5 x 2,5 m, que continham 120 pontos amostrais distribuídos numa área de 1.875 m². A correlação linear entre a PG e a R foi praticamente nula, uma vez que, dependendo das profundidades estudadas do solo, apresentou coeficientes de correlação (r) menores do que 0,20. A análise geoestatística apresentou boa estrutura de dependência espacial, tanto para a PG quanto para a R, quando analisadas isoladamente. Entretanto, a análise espacial conjunta de tais atributos apresentou-se inconsistente. Assim, com o aumento da resistência mecânica à penetração, em determinada região do solo ocorreu ora aumento, ora diminuição do rendimento de grãos do feijoeiro.

Colina e betaína em rações purificadas na nutrição da tilápia do Nilo (Oreochromis niloticus)

Problemas metabólicos observados em produções intensivas de tilápias do Nilo (Oreochromis niloticus) têm sido relacionados à deficiência de colina nas rações. Com o objetivo de avaliar o efeito da suplementação dietética da colina na nutrição da espécie, rações purificadas contendo 0; 375; 750; 1.125; 1.500 ou 1.875 mg de cloreto de colina por kg, foram administradas ad libitum por 42 dias a tilápias do Nilo (5,09 ± 0,14 g), estocados em gaiolas de PVC atóxico (volume = 60 L), alojadas em caixas de polipropileno de 1000 L, em ambiente com condições controladas de temperatura e luminosidade, num delineamento experimental em blocos incompletos casualizados, com três parcelas por bloco (n=5). O ganho de peso (GDP) e o índice de conversão alimentar (ICA) de todos os tratamentos foram superiores ao controle. Não foram observadas diferenças para a quantidade de lipídios no fígado e tecido corporal, e sobrevivência (S%). Num segundo experimento, os peixes foram alimentados com rações suplementadas com 1.250 ou 2.500 mg de cloreto de colina por kg; ou 1.000; 2.000 ou 3.000 mg de betaína por kg. Não foram observadas diferenças significativas para S% e acúmulo de lipídeos hepáticos ou corporais; o ICA e GDP dos tratamentos suplementados com colina foram superiores aos dos tratamentos suplementados com betaína, mas não diferiram entre si. Níveis de suplementação superiores a 375 mg de cloreto de colina por kg de alimento melhoram o ICA e o GDP da tilápia do Nilo, mas a betaína não substitui efetivamente a colina em rações para a espécie.

Economic design of (X)over-bar charts with variable parameters: the Markov chain approach

This paper presents an economic design of (X) over bar control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an (X) over bar value falls close to the target and is tightened when an (X) over bar value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the (X) over bar chart parameters.

THE IMAGINARY ABOUT THE SCHOOL and THE POSSIBILITIES of AN EQUALITARIAN SCHOOL: A STUDY on THE BRAZILIAN STATE SCHOOLS

The main objective of the article is to reflect on the imaginary that the teachers of two public schools have of their students and the school they work in and the ideal of an inclusive and democratic school. In this article, we reflect on the image that the teachers of two public schools in the city of Rio Claro, São Paulo State, Brazil, have of their students and their school as an institution. We use the studies of imaginary sociology as a theoretic reference base. Castoriadis (1986); Taylor (2006); Legros et al (2007) and Baczo (1984) are the referenced authors of this article. (C) 2012 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of The Association of Science, Education and Technology

Relative growth of the mangrove crab Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ocypodidae) at Iguape, São Paulo, Brazil

A total of 2,130 individuals of Ucides cordatus (1,255 males and 875 females) were captured in a mangrove forest at Iguape, São Paulo, Brazil. For each crab, the following body structures were measured: carapace (width = CW; length = CL; depth = CD), 5th abdominal somite (AW), major chelar propodus (length = PL; width = PW; depth = PD), and 1st and 2 nd gonopod pairs (length = GL1 and GL2). The Student t and Snedecor F tests were used to verify any changes in growth allometric rates during ontogeny. The relationships CLxCW, PLxCW (for both sexes), GL1xCW and GL2xCW (males) and AWxCW (females), showed a better fit by two equations for the juvenile and adult phases (p<0.01). The inflexion point size between regression lines, indicated by each morphometric relationship, allowed to propose four morphotypes for U. cordatus. Males were classified in juvenile (CW le; 32 mm), pre-puberty (32 ≤ CW ≤ 51 mm), sub-adult (51 ≤ CW ≤ 59 mm) and adult (CW > 59 mm). Females showed a similar size interval: (juvenile CW ≤ 39 mm, pre-puberty 39 ≤ CW ≤ 53 mm, sub-adult 53 ≤ CW ≤ 58 mm, adult CW > 58 mm).

Crítica periodística: a mediação das artes visuais na Folha de São Paulo e no Estado de São Paulo durante a 29a. Bienal de São Paulo (25/09 a 12/12 de 2010

Pós-graduação em Artes - IA

A ilusão dramática em Acarnenses, de Aristófanes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)