Anthelmintic efficacy of oral trichlorfon solution against ivermectin resistant nematode strains in cattle

Infected calves from two different rural estates in Brazil were studied to assess the anthelmintic efficacy of oral trichlorfon against naturally occurring ivermectin resistant parasitic nematode strains. In experiment 1, infected animals were from a region where ivermectin resistant populations of Haemoncus placei, Cooperia punctata,Cooperia spatulata and Trichuris discolor have recently been identified. Six calves with natural gastrointestinal nematode infections were treated with 48.5 mg/kg aqueous trichlorfon administered orally and six calves acted as a non-treated control group. In experiment 11 24 naturally infected calves were selected to enter one of four treatment groups, six animals each received: 48.5 mg/kg oral trichlorfon; 200 mu g/kg subcutaneous 1% ivermectin; 630 mu g/kg subcutaneous 3.15% ivermectin; or no treatment (control group). Gastrointestinal helminths were counted and identified post-mortem at 7 days (trichlorfon and 1% ivermectin treated and untreated animals) or 14 days (3.15% ivermectin treated and untreated animals) after administration of the test agents. Experiment I identified a high level efficacy for oral trichlorfon against four helminth species that have previously been shown to be ivermectin resistant in this geographical region: percentage efficacy was 99.82% against adult H. placei, 99.18% against C. punctata, 99.33% against C. spatulata, 81.06% against T. axei, 98.46% against Oesophagostomum radiatum and 100% against T. discolor. Trichlorfon also showed activity against the ivermectin (1% and 3.15%) resistant helminth species identified in experiment 11, attaining efficacy levels of 99.17% against H. placei, 98.46% against C punctata and 100.00% against T. discolor. These findings indicate that oral trichlorfon is an effective treatment option in the management of cattle infected with ivermectin resistant helminths. (C) 2009 Elsevier B.V. All rights reserved.

Identification, characterization and expression analysis of hepcidin gene in sheep

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Interaction between total-etch and self-etch adhesives and conventional and self-adhesive resin cements

The aim of this study was to compare the bond strength to enamel between resin cements combined with total-etch and self-etch adhesive systems and a self-adhesive cement. Eighty bovine incisors had their buccal surface ground flat exposing a plane area in the enamel. Eighty Artglass resin cylinders measuring 3 mm in diameter and 4 mm in height were fabricated. The teeth were divided into eight groups of 10 teeth each and the resin cylinders were cemented with different adhesive systems and resin cements; G1: RelyX Unicem (self-adhesive cement); G2: H 3PO 4 + Single Bond + RelyX ARC; G3: AdheSE + Variolink II; G4: H 3PO 4 + Excite + Variolink II; G5: Xeno III + Enforce; G6: H 3PO 4 + Prime&Bond NT + Enforce; G7: Biatite Primers 1 and 2 + Bistite II DC; G8: H 3PO 4 + Bistite Primers 1 and 2 + Bistite II DC. After application of the adhesives, the cylinders were cemented according to manufacturer instructions. The specimens were submitted to 2000 thermal cycles at a temperature ranging from 5±5°C to 55±5°C, and shear bond strength was then tested at a variety of 1 mm/min. The data were analyzed by ANOVA and the Tukey's test (á=5%), obtaining a p value of 0.00. The following mean (±standard deviation) bond strength values were observed for each group: G1: 5.14(±0.99)a; G3: 16.23(±4.69)b; G7: 17.82(±3.66)b; G5: 18.48(±2.88)bc; G8: 20.15(±4.12)bc; G4: 22.85(±3.08)cd; G2: 24.96(±2.89)d; G6: 26.07(±1.69)d. Groups followed by the same letters did not differ significantly. For most of the resin cements tested, the application of adhesive systems using acid etching resulted in a higher bond strength when compared to the self-etch adhesive systems and to the self-adhesive cement.

Evaluation of a new intraoral paralleling device for creating guiding planes: A pilot study

Aim: The aim of the study was to assess the accuracy of a new intraoral paralleling device for creating proximal guiding planes for removable partial dental prostheses. Methods and Materials: Thirty gypsum casts were divided into two groups in which the proximal surfaces of selected teeth were prepared using either a surveying device (Group 1) or the new ParalAB paralleling device (Group 2). In each cast guiding planes were prepared on the distal surface of the maxillary left canine (A), on the mesial and distal surfaces of the maxillary left second molar (B and C), and on the distal surface of the maxillary right canine (D). Each prepared surface formed an angle related to the occlusal plane that was measured five times and averaged by one operator using a tridimensional coordinate machine. Results: The mean guiding plane angles (± standard deviation) for the prepared surfaces were A=91.82° (±0.48°, B=90.47° (±0.47°, C=90.21° (±0.76°, and D=90.50° (±0.73°) for the dental surveyor (Group 1) and A=92.18° (±0.87°), B=90.90° (±0.85°), C=90.07° (±0.92°), and D=90.66° (±0.76°) for the ParalAB paralleling device (Group 2). A two-way ANOVA, Tukey's, and Levène's tests (at p<0.05) revealed statistically significant differences among surfaces prepared by both groups and that one surface Conclusions: The ParalAB device was able to prepare parallel surfaces and despite significant difference between groups, the ParalAB presented a small deviation from absolute parallelism and can be considered a valid method to transfer guide plans in the fabrication of removable partial dentures. Clinical Significance: The preparation of suitable guiding planes on abutment teeth during the fabrication of removable partial dentures is dependent on the ability of the operator and requires considerable chair time. When multiple teeth are involved, achieving parallelism between abutment surfaces can be technically challenging, especially in posterior regions of the mouth. The ParalAB prototype intraoral paralleling device can aid the clinician during the preparation of accurate guiding planes with a minimum degree of occlusal divergence. © 2010 Seer Publishing LLC.

Desmame precoce: Falta de conhecimento ou de acompanhamento?

Objective: To assess the knowledge of women and the instructions received on breastfeeding during pregnancy and after childbirth, and their influence on breastfeeding practice. Method: This study was a longitudinal investigation following 84 pairs of mothers and babies from pregnancy through the sixth month of baby's life. In the first phase of the research, interviews were made with the pregnant women at home and at Basic Health Units to collect information about their intentions and knowledge of breastfeeding. In the second phase of the research, mothers and babies were followed up from the first to sixth month of baby's life to record the difficulties of breastfeeding and reasons for weaning. Results: In the first month, 94.3% (82) of the babies were breastfed, but only 49.4% (43) were breastfed exclusively. At the end of the sixth month of life, 43.7% (38) of the babies had already been weaned. No mother breastfed exclusively her baby within the sixth month. During pregnancy, 60.7% (51) of the mothers had no instructions about breastfeeding and 83.4% (70) of the mothers received instructions on breastfeeding after childbirth. Most mothers (76.2%) knew about the ideal breastfeeding period. Seventy-three (86.9%) mothers believed that breastfeeding was beneficial for the baby, but only 41 (48.8%) of them really breastfed. Only 11 (13.1%) mothers were followed up by the public health system team during lactation. Conclusion: Although most women had been instructed during pregnancy or after childbirth and had knowledge of breastfeeding, early weaning occurred. Advising is important, but the support and follow up of the mothers are of utmost importance for a successful breastfeeding practice.

O concerto para viola e orquestra de Antônio Borges-Cunha: forma e interpretação

This article has as object of study the Concerto for Viola and Orquestra by Antonio Borges-Cunha. We investigated the work by observing its formal structure. This resulted in data which were relevant to the understanding of the work itself and to decisive procedures in its interpretation. These data were then applied to specific issues in the area of performance, by means of a process whereby the sensations of movement and direction were delineated. This investigation discusses interpretation and the queries regarding the paths which performers can choose in their quest for positive results in expressivity. It is a study specifically geared to the area of performance and, in a broader sense, serves composers that are interested in the performer's contribution to the creative process of a work.

Alteração da expressão de sFAS e sFASL na leishmaniose voisceral canina: Juliana Perosso Borges. -

Pós-graduação em Ciência Animal - FMVA

Genetic analysis of superoxide dismutase 1 gene in murrah river buffalo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação endoscópica das vias aéreas, perfil de gases sanguíneos, eletrólitos e do equilíbrio ácido-base em equinos submetidos ao treinamento de três tambores: João Pedro Borges Barbosa. -

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)