The Effects of a 785-nm AlGaInP Laser on the Regeneration of Rat Anterior Tibialis Muscle After Surgically-Induced Injury

Objective: This study aims to investigate the effects of low-level laser therapy (LLLT) on muscle regeneration. For this purpose, the anterior tibialis muscle of 48 male Wistar rats received AlGaInP laser treatment (785 nm) after surgically-induced injury.Background Data: Few studies have been conducted on the effects of LLLT on muscle regeneration at different irradiation doses.Materials and Methods: The animals were randomized into four groups: uninjured rats (UN); uninjured and laser-irradiated rats (ULI); injured rats (IN); and injured and laser-irradiated rats (ILI). The direct contact laser treatment was started 24 h after surgery. An AlGaInP diode laser emitting 75 mW of continuous power at 785 nm was used for irradiation. The laser probe was placed at three treatment points to deliver 0.9 J per point, for a total dose of 2.7 J per treatment session. The animals were euthanized after treatment sessions 1, 2, and 4. Mounted sections were stained with hematoxylin and eosin and used for quantitative morphological analysis, in which the number of leukocytes and fibroblasts were counted over an area of 4480 mu m(2). The data were statistically analyzed by analysis of variance (ANOVA) and the Bonferroni t-test.Results: Quantitative data showed that the number of both polymorphonuclear and mononuclear leukocytes in the inflammatory infiltrate at the injury site was smaller in the ILI(1), ILI(2), and ILI(4) subgroups compared with their respective control subgroups (IN(1), IN(2), and IN(4)) for sessions 1, 2, and 4, respectively (p < 0.05). on the other hand, the number of fibroblasts increased after the fourth treatment session (p < 0.05). With regard to the regeneration of muscle fibers following injury, only after the fourth treatment session was it possible to find muscle precursor cells such as myoblasts and some myotubes in the ILI(4) subgroup.Conclusion: During the acute inflammatory phase, the AlGaInP laser treatment was found to have anti-inflammatory effects, reducing the number of leukocytes at the injury site and accelerating the regeneration of connective tissue.

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip's area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. on 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). on 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

A Novel 785-nm Laser Diode-Based System for Standardization of Cell Culture Irradiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of Tityus serrulatus scorpion venom on lung mechanics and inflammation in mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento alimentar do camarão de agua doce, Macrobrachium rosenbergii (De Man) (Crustacea, Palaemonidae) durante a fase larval: análise qualitativa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise endogâmica de uma população de pepino caipira

Neste trabalho avaliou-se a perda de vigor para produção de frutos imaturos com sucessivas gerações de autofecundação (S0, S1, S2, S3, S4 e S5), em uma população de pepino caipira, obtida pelo cruzamento dos híbridos Safira x Hatem. O delineamento experimental utilizado foi em blocos ao acaso, sete tratamentos (seis gerações de autofecundação com diferentes níveis de endogamia e o híbrido Safira como testemunha), seis repetições e cinco plantas por parcela conduzidas em ambiente protegido. Foram avaliados a produção de frutos imaturos total e comercial (número e peso), porcentagem de frutos comerciais e peso médio de frutos. As médias foram comparadas pelo teste de Tukey (5%) e a avaliação da depressão por endogamia foi feita com análise de regressão sem o híbrido Safira. As populações S0 e S1 foram iguais ou superiores ao híbrido Safira para as características número de frutos totais, peso total por planta e peso de frutos comercial por planta, demonstrando o potencial desta população para obtenção de uma nova cultivar ou híbrido do tipo caipira. Houve menor produção de frutos (total e comercial) a partir da população S2, demonstrando possível perda de vigor nesta população com as autofecundações sucessivas.

Layer by layer TiO2 thin films and photodegradation of Congo red

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural and Electric-Optical Properties of Zinc Phthalocyanine Evaporated Thin Films: Temperature and Thickness Effects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

eIF5A has a function in the elongation step of translation in yeast

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genotyping of Mycobacterium tuberculosis isolates from alow-endemic setting in northwestern state of Paraná in Southern Brazil

The purpose of this study was to provide information about the genetic diversity and prevalent genotype of Mycobacterium tuberculosis in a low-endemic setting in northwestern state of Paraná in Southern Brazil. We employed spoligotyping and mycobacterial interspersed repetitive units-variable number tandem repeat (MIRU-VNTR) techniques to genotype M. tuberculosisisolates from patients with pulmonary tuberculosis (TB). The 93 isolates analyzed by spoligotyping were divided into 36 different patterns, 30 of which were described in the SITVIT database. Latin American and Mediterranean, Haarlem and T families were responsible for 26.9%, 17.2% and 11.8% of TB cases, respectively. From the 84 isolates analyzed by MIRU-VNTR, 58 shared a unique pattern and the remaining 26 belonged to nine clusters. The MIRU loci 40, 23, 10 and 16 were the most discriminatory. A combination of MIRU-VNTR and spoligotyping resulted in 85.7% discriminatory power (Hunter-Gaston index = 0.995). Thus, combining spoligotyping and MIRU-VNTR typing proved to be most useful for epidemiological study in this low-endemic setting in Southern Brazil. The current study demonstrated that there is significant diversity in circulating strains in the city of Maringá and the surrounding regions, with no single genotype of M. tuberculosispredominating.

Control charts for monitoring the mean vector and the covariance matrix of bivariate processes

In this article, we propose new control charts for monitoring the mean vector and the covariance matrix of bivariate processes. The traditional tools used for this purpose are the T (2) and the |S| charts. However, these charts have two drawbacks: (1) the T (2) and the |S| statistics are not easy to compute, and (2) after a signal, they do not distinguish the variable affected by the assignable cause. As an alternative to (1), we propose the MVMAX chart, which only requires the computation of sample means and sample variances. As an alternative to (2), we propose the joint use of two charts based on the non-central chi-square statistic (NCS statistic), named as the NCS charts. Once the NCS charts signal, the user can immediately identify the out-of-control variable. In general, the synthetic MVMAX chart is faster than the NCS charts and the joint T (2) and |S| charts in signaling processes disturbances.

Effect of Metal-Ceramic or All-Ceramic Superstructure Materials on Stress Distribution in a Single Implant-Supported Prosthesis: Three-Dimensional Finite Element Analysis

Purpose: This three-dimensional finite element analysis study evaluated the effect of different material combinations on stress distribution within metal-ceramic and all-ceramic single implant-supported prostheses. Materials and Methods: Three-dimensional finite element models reproducing a segment of the maxilla with a missing left first premolar were created. Five groups were established to represent different superstructure materials: GP, porcelain fused to gold alloy; GR, modified composite resin fused to gold alloy; TP, porcelain fused to titanium; TR, modified composite resin fused to titanium; and ZP, porcelain fused to zirconia. A 100-N vertical force was applied to the contact points of the crowns. All models were fixed in the superior region of bone tissue and in the mesial and distal faces of the maxilla section. Stress maps were generated by processing with finite element software. Results: Stress distribution and stress values of supporting bone were similar for the GP, GR, TP, and ZP models (1,574.3 MPa, 1,574.3 MPa, 1,574.3 MPa, and 1,574.2 MPa, respectively) and different for the TR model (1,838.3 MPa). The ZP model transferred less stress to the retention screw (785 MPa) than the other groups (939 MPa for GP, 961 MPa for GR, 1,010 MPa for TP, and 1,037 MPa for TR). Conclusion: The use of different materials to fabricate a superstructure for a single implant-supported prosthesis did not affect the stress distribution in the supporting bone. The retention screw received less stress when a combination of porcelain and zirconia was used. Int J Oral Maxillofac Implants 2011;26:1202-1209

Association of Haplotypes in the CXCR2 Gene with Periodontitis in a Brazilian Population

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Fungal Contamination on Substrate Carrying by the Leafcutter Ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)