Efeitos dos tratamentos térmicos de normalização, resfriamento rápido e alívio de tensões no aço ASTM A-516 grau 70, utilizado na fabricação de vasos de pressão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das alterações das propriedades mecânicas em aço A-516 grau 70 soldado e submetido a tratamento térmico de alívio de tensões

Pressure vessels are equipments that require a great care because of their high cost and human life risk in case of fail, and its fabrication methods are different for each manufacturer. Normally, pressure vessels and its parts are fabricated by welding, which may change local properties of metals. The head of a pressure vessel is a very important structural component and it is fabricated by welding and mechanical conformation. Because its excellent mechanical properties, de steel A-516 Grade 70 is often used in manufacturing of large pressure vessels that are subjected to high pressure and temperature, but was verified that its mechanical resistance is decreased when submitted to a tension relief heat treatment. By experience it was defined that before mechanical conformation of the head of a large pressure vessel, the steel should be submitted to a stress relief heat treatment in order to facilitate the mechanical conformation, but there is no quantitative analysis to prove this method and study its possible risks. In the present work the steel A-516 Grade 70 demonstrated a decrease of its mechanical resistance when submitted to a stress relief heat treatment, but keeping above the minimum limit defined in the literature. By other side its ductility was substantially increased, being possible to deduce that the stress relief heat treatment before mechanical conformation is a viable e recommended technique, but with reservations. With the data acquired during the fabrication e preparation of the specimen and the result of the tests, it was possible to elaborate a welding procedure that provides the same results obtained in this present work

Effect of intensification on grow out of the Amazon River prawn, Macrobrachium amazonicum

The effects of intensification on growth, survival, productivity, population structure, and distribution of harvested biomass in individual size classes of Macrobrachium amazonicum in semi-intensive culture were evaluated. Postlarvae (0.01 g) were stocked in 12 ponds at densities of 10, 20, 40, and 80/m(2) (three replicates per treatment) and raised for 5.5 mo. Average individual weight significantly decreased and productivity significantly increased as stocking density increased (P < 0.001), while survival was not affected (P > 0.05). Prawn mean weight at harvest ranged from 3.6 (80/m(2)) to 7.0 g (10/m(2)). Average survival ranged from 65.5% (40/m(2)) to 72.8% (20/m(2)), while productivity ranged from 508 (10/m(2)) to 2051 kg/ha (80/m(2)). Harvested biomass showed a clear bimodal distribution in individual size classes indicating the occurrence of heterogeneous growth, which may affect management and market strategies. Harvested biomass of prawns weighing more than 7 g (the best market size) increases for stocking densities up to 40/m(2) and stabilizes between 40 and 80/m(2). Growth reduction was associated with a decreasing frequency and average weight of green claw 1 and green claw 2 male morphotypes and adult females as density increased. Thus, the distribution of male morphotypes and sexually mature females are affected by density-dependent factors. Results suggest that prawn density plays an important role on M. amazonicum grow-out phase, as has been demonstrated for other species of the genus Macrobrachium. M. amazonicum tolerates grow-out intensification and may be raised in both semi-intensive and intensive systems stocked at very high densities yielding high productivity.

Épocas de consórcio de alho com cenoura em três sistemas de manejo de plantas daninhas, em Caçador-SC

O presente trabalho teve por objetivo avaliar os efeitos do consórcio alho e cenoura em quatro épocas de semeadura de cenoura e em três manejos de plantas daninhas, visando determinar os benefícios do consórcio em relação ao controle destas plantas, à produtividade, à rentabilidade e à sua qualidade comercial. Testaram-se quatro épocas de semeadura da cenoura (0, 15, 30 e 45 dias após o plantio do alho), combinadas a três manejos de plantas daninhas (com herbicida, sem controle e com capinas freqüentes). Utilizou-se o delineamento de blocos casualizados dispostos em parcelas subdivididas, com a época de semeadura da cenoura sendo parcela e o sistema de manejo, a sub-parcela, em quatro repetições. O oxadiazon a 750 g ha-1 não foi tóxico às plantas de alho nem às de cenoura. A rentabilidade do consórcio alho e cenoura foi vantajosa em relação ao monocultivo de alho, principalmente dentro do manejo com capinas freqüentes.

Feeding of Spodoptera eridania (Lepidoptera: Noctuidae) on soybean genotypes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Reações do algodoeiro CNPA-ITA 90 ao cloreto de mepiquat

Com o objetivo de avaliar os efeitos de diferentes doses de cloreto de mepiquat aplicadas parceladamente no algodoeiro (Gossypium hirsutum L.) cv. CNPA-ITA 90, dois experimentos foram conduzidos durante os anos agrícolas de 1993/94 e 1994/95, na Fazenda Itamarati, Ponta Porã, MS. As doses estudadas foram: 1) 0,0; 2) 12,5+12,5+25,0 (50,0); 3) 25,0+25,0+25,0 (75,0); 4) 0,0+ 50,0+50,0 (100,0) e 5) 12,5+62,5+50,0 (125,0) g ha-1 de cloreto de mepiquat. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. As aplicações foram efetuadas aos 34, 47 e 62 dias após a emergência (DAE), em 1993/94, e aos 42, 60 e 73 DAE no ano de 1994/95, quando as plantas apresentavam altura média de 51, 84 e 93 cm e 61, 79 e 97 cm, respectivamente. Com o aumento da dose de cloreto de mepiquat, verificou-se redução da altura de plantas, da matéria seca foliar, do caule e do total da parte vegetativa, do número de nós, de ramos, do comprimento de ramos, do número de frutos danificados e do número de maçãs, e aumento do número de capulhos totalmente abertos.

Produtividade da cana-de-açúcar fertirrigada com N e K via gotejamento subsuperficial

The objective of this work consisted in the study of the fertigation and subsurface drip irrigation in the sugarcane productivity, in the second and the third seasons and technological effects in the growth. The experiment was developed in the experimental area of the Agronomical Sciences Faculty, FCA/UNESP - Botucatu, Brazil. The drip pipe was installed at 30 cm of depth and under the plantation line of sugar cane RB 72454 variety. The fertigation treatment with the biggest dose presented the better yield, with 190.01 t ha(-1) and 168.80 t ha(-1) to the second and the third harvest, respectively. The fertigation did not modify the technological qualities of the sugarcane in the two studied seasons, and the irrigation provided 43.5% and 67.2% of increments in the production of stem, to the second and third cut, respectively.

Monitoramento de problemas com plantas aquáticas e caracterização da qualidade de água e sedimento na UHE Mogi-Guaçu

Este trabalho foi realizado na UHE Mogi-Guaçu, pertencente à AES Tietê S.A. Levantamento de plantas aquáticas e amostragem de água e sedimento foram realizados em julho de 2001 (estação seca), novembro de 2001 (início da estação chuvosa) e março de 2002 (final da estação chuvosa). Foram feitas 846 análises de água e 516 de sedimento, avaliando-se 47 características da água e 41 do sedimento. Espécies marginais e flutuantes foram as principais infestantes do reservatório, merecendo destaque as espécies Brachiaria subquadripara, Eichornia crassipes, Polygonum lapathifolium, Panicum rivulare, Salvinia auriculata e Pistia stratiotes. A turbidez e conseqüente baixa transmissão de luz pela coluna d'água impossibilitaram o desenvolvimento de plantas submersas. Teores de fósforo e nitrogênio encontrados tanto na água quanto no sedimento mostraram-se suficientes para suportar o crescimento de plantas aquáticas. A ocorrência de plantas marginais e flutuantes estava associada ao intenso processo de sedimentação observado no reservatório.

Efficiency of seed treatment with fungicides in castor bean crop genotypes

With the objective of assessing castor bean genotypes in relation to the influence of seeds treatment on agronomic characteristics and physiological quality of seeds, two experiments were conducted between November, 2005 and March, 2006. In the first study, experimental design used was randomized complete blocks, in factorial scheme (2 x 10), by comparing Lyra hybrid and AL Guarany 2002 cultivar and nine fungicides, including its mixtures and test, with four repetitions. Plant height, stem diameter, medium yield and observation of diseases incidence were evaluated. In the second study, conducted in randomized entirely design, in factorial scheme 2 x 10 with four repetitions, Savana and AL Guarany 2002 genotypes were analyzed, using the same fungicides. Germination, infected and dead seeds, vigor, initial moisture content and simulation of field emergency and seeds sanitary quality were also evaluated. The results obtained point that there is positive influence of seed treatment on agronomic characteristics in castor bean crop, increasing grain yield for AL Guarany cultivar and Lyra hybrid. In the analysis of seed quality, it was observed that seed treatments with fungicides and their mixtures provided superior percentages of germination and vigor, reduced the number of infected and dead seeds and increased seeds emergency for Guarany 2002 cultivar and Savana hybrid.

CHARACTERIZATION of RALSTONIA SOLANACEARUM STRAINS FROM BRAZIL USING MOLECULAR METHODS and PATHOGENICITY TESTS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Doses and forms of application of phosphorus in vernalized garlic

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fabrication and characterization of chemical sensors made from nanostructured films of poly(o-ethoxyaniline) prepared with different doping acids

Chemical sensors made from nanostructured films of poly(o-ethoxyaniline) POEA and poly(sodium 4-styrene sulfonate) PSS are produced and used to detect and distinguish 4 chemicals in solution at 20 mM, including sucrose, NaCl, HCl, and caffeine. These substances are used in order to mimic the 4 basic tastes recognized by humans, namely sweet, salty, sour, and bitter, respectively. The sensors are produced by the deposition of POEA/PSS films at the top of interdigitated microelectrodes via the layer-by-layer technique, using POEA solutions containing different dopant acids. Besides the different characteristics of the POEA/PSS films investigated by UV-Vis and Raman spectroscopies, and by atomic force microscopy.. it is observed that their electrical response to the different chemicals in liquid media is very fast, in the order of seconds, systematical, reproducible, and extremely dependent on the type of acid used for film fabrication. The responses of the as-prepared sensors are reproducible and repetitive after many cycles of operation. Furthermore, the use of an "electronic tongue" composed by an array of these sensors and principal component analysis as pattern recognition tool allows one to reasonably distinguish test solutions according to their chemical composition. (c) 2007 Published by Elsevier B.V.

Influence of Heat Treatment and Oxygen Doping on the Mechanical Properties and Biocompatibility of Titanium-Niobium Binary Alloys

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of strontium addition on ferroelectric phase transition of PZT thin films prepared by chemical route

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)