Evaluation and development of passion fruit (Passiflora alata Dryander) propagated by cutting and seet in conditions of commercial orchard

The present work was conducted in a fruit tree propagation area of the Plant Production Department of the Faculdade de Ciencias Agrarias e Veterinarias, Universidade Estadual Paulista (FCAV/UNESP) in Jaboticabal, SP, and also in a commercial orchard in Araguari, MG, with the objective to verify the potential of vegetative growth (stem diameter, height of plants and leaf number) of plants of passion fruit (Passiflora alata Dryander), gotten by cutting and seed, comparing the initial development of plants in the field. This experiment was carried out from January 2002 to February 2003. The experiment using seeds was conducted at a shadow house, and the one that used cuttings in an intermitent mist. The cuttings and seeds were collected from adult plants which came from Passifloraceae Active Germoplasm Bank (BAG) of the Plant Production Department of FCAC/UNESP. For the cuttings, it was used the intermediate part of the branches in stadium of vegetative growth. The seeds, in order to obtain the seedlings, had been sown in plastic trays. Cuttings and seedlings were transplanted to plastic bags with substrate in shadow house and with daily irrigation. They were acclimatized and planted on field, after 60 days. on field, the stem diameter, plant height and number of leaves were better for cuttings than for seedlings in Jaboticabal, SP. In Araguari, MG, stem diameter was larger in the seedlings, which plant heights and number of leaves were larger on cuttings.

Morphological and Genomic Differences Between Cutting and Racing Lines of Quarter Horses

To investigate morphological and genomic differences between cutting and racing lines of Quarter Horses, 120 racing and 68 cutting animals of both sexes, registered at the Brazilian Association of Quarter Horse Breeders, were used. Blood samples were collected, and the following physical traits were measured: weight; height at withers; body length; length of the shank, pastern, rump, head, and neck; and chest, shank, and hoof circumference. For analysis of genomic differences, 54,602 single-nucleotide polymorphisms (SNPs) were genotyped using the Equine SNP50 BeadChip, and the quality of individual and SNP genotype data were evaluated. The fixation index, FST, was used to identify genome regions that were altered in the lines by selection. The results showed significant differences between the lines in all physical traits. Quality control led to the exclusion of four cutting animals with a call rate of <0.95. After filtering, 12,544, 13,815, and 13,370 SNPs were excluded for the whole population (n = 184), the 120 racing animals, and the 64 cutting animals, respectively. The number of informative polymorphisms detected in each line and in the whole population indicated that the Equine SNP50 BeadChip can be used in genetic studies of Quarter Horses. The fixation index, FST, identified 2,558 genome regions that may have been modified by divergent selection. © 2013 Elsevier Inc.

Estudo dos problemas de corte e empacotamento

Pós-graduação em Engenharia Elétrica - FEIS

Shared Escovopsis parasites between leaf-cutting and non-leaf-cutting ants in the higher attine fungus-growing ant symbiosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O problema de corte de placas defeituosas

O problema tratado neste trabalho consiste em cortar uma placa retangular em peças menores retangulares, de modo que a perda seja minimizada. A placa, entretanto, contém defeitos bem localizados. Propomos uma abordagem em grafo E/OU para representação das soluções possíveis e um método de enumeração implícita para determinar a solução ótima. Resultados computacionais demonstram a efetividade da abordagem.

Heurística Surrogate para problema de carregamento de paletes dio produtor

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuições para o problema de corte de estoque bidimensional na indústria moveleira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A Aplicação de um modelo matemático na resolução de um problema de carregamento de paletes

Global competitiveness has been increased significantly in the last decade and, as consequence, companies are always looking for developing better processes in supply chain operations in order to maintain their competitive costs and keep themselves in the business. Logistics operations represent a large part of the product's final cost. Transportation can represent more than fifty percent of final cost sometimes. The solutions for cutting and packing problems consist in simple and low investment actions, as enhancing the arrangement of the transported load in order to decrease both material and room wastes. As per the presented reasons, the objective of this paper is to show and analyze a real application of a mathematical model to solve a manufacturer pallet-loading problem, comparing results from the model execution and the solution proposed by the company studied. This study will not only find the best arrangement to load pallets (which will optimize storage and transportation process), but also to check the effectiveness of existing modeling in the literature. For this study a computational package was used, which consists of a modeling language GAMS with the CPLEX optimization solver and two other existing software in the market, all of them indicating that an accurate mathematical model for solving this kind of problem in a two-dimensional approach is difficult to be found, in addition to a long execution time. However, the study and the software utilization indicate that the problem would be easily solved by heuristics in a shorter execution time

Metallomic study on plasma samples from Nile tilapia using SR-XRF and GFAAS after separation by 2D PAGE: initial results

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bond strength of resin modified glass ionomer cement to primary dentin after cutting with different bur types and dentin conditioning

The aim of this in vitro study was to evaluate the effect of different bur types and acid etching protocols on the shear bond strength (SBS) of a resin modified glass ionomer cement (RM-GIC) to primary dentin. Forty-eight clinically sound human primary molars were selected and randomly assigned to four groups (n=12). In G1, the lingual surface of the teeth was cut with a carbide bur until a 2.0-mm-diameter dentin area was exposed, followed by the application of RM-GIC (Vitremer - 3M/ESPE) prepared according to the manufacturer's instructions. The specimens of G2, received the same treatment of G1, however the dentin was conditioned with phosphoric acid. In groups G3 and G4 the same procedures of G1 and G2 were conducted respectively, nevertheless dentin cutting was made with a diamond bur. The specimens were stored in distilled water at 37 degrees C for 24h, and then tested in a universal testing machine. SBS. data were submitted to 2-way ANOVA (= 5%) and indicated that SBS values of RM-GIC bonded to primary dentin cut with different burs were not statistically different, but the specimens that were conditioned with phosphoric acid presented SBS values significantly higher that those without conditioning. To observe micromorphologic characteristics of the effects of dentin surface cut by diamond or carbide rotary instruments and conditioners treatment, some specimens were examined by scanning electron microscopy. Smear layer was present in all specimens regardless of the type of rotary instrument used for dentin cutting, and specimens etched with phosphoric acid presented more effective removal of smear layer. It was concluded that SBS of a RM-GIC to primary dentin was affected by the acid conditioning but the bur type had no influence.

Digit Ratio (2D:4D), Aggression, and Testosterone in Men Exposed to an Aggressive Video Stimulus

The relative lengths of the 2nd and 4th digits (2D:4D) is a negative biomarker for prenatal testosterone, and low 2D:4D may be associated with aggression. However, the evidence for a 2D:4D-aggression association is mixed. Here we test the hypothesis that 2D:4D is robustly linked to aggression in challenge situations in which testosterone is increased. Participants were exposed to an aggressive video and a control video. Aggression was measured after each video and salivary free testosterone levels before and after each video. Compared to the control video, the aggressive video was associated with raised aggression responses and a marginally significant increase in testosterone. Left 2D:4D was negatively correlated with aggression after the aggressive video and the strength of the correlation was higher in those participants who showed the greatest increases in testosterone. Left 2D:4D was also negatively correlated to the difference between aggression scores in the aggressive and control conditions. The control video did not influence testosterone concentrations and there were no associations between 2D:4D and aggression. We conclude that 2D:4D moderates the impact of an aggressive stimulus on aggression, such that an increase in testosterone resulting from a challenge is associated with a negative correlation between 2D:4D and aggression.

Differentiation in Selection of Dicots and Grasses by the Leaf-Cutter Ants Atta capiguara, Atta laevigata and Atta sexdens rubropilosa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluating craniofacial asymmetry with digital cephalometric images and cone-beam computed tomography

Introduction: The aim of this study was to evaluate craniofacial asymmetry by using 2-dimensional (2D) poster-oanterior cephalometric images, 3-dimensional cone-beam computed tomography (CBCT), and physical measurements (gold standard). Methods: Ten dry human skulls were assessed, and radiopaque markers were placed on 17 skeletal landmarks. Twenty linear measurements were taken on each side to compare the right and left sides and to compare these measurements with the physical measurements made with a digital caliper. To acquire the 2D posteroanterior radiographs, an Extraoral Phosphor Storage Plate (Air Techniques, Chicago, Ill) was used as the image receptor with a Eureka x-ray-Duocon Machlett unit (Machlett Laboratores, Chicago, Ill). Three-dimensional imaging data were acquired from a CB MercuRay (Hitachi Medical, Tokyo, Japan). Results: on average, the right side was larger than the left for most of the 20 distances evaluated in the digital 2D and the CBCT images, and there was poor agreement between the digital 2D images and the physical measurements (kappa = 0.0609) and almost perfect agreement (kappa = 0.92) between the CBCT and physical measurements when individual measurements were considered. Conclusions: Human skulls, with no apparent asymmetry, had some differences between the right and left sides, with dominance for the right side but with no clinical significance. CBCT can better evaluate craniofacial morphology when compared with digital 2D images. (Am J Orthod Dentofacial Orthop 2011; 139: e523-e531)

Characterization and biological studies of a new platinum(II) complex with the amino acid L-alliin

Synthesis and characterization of a new Pt(II) complex with the amino acid L-alliin (S-allyl-L-cysteine sulfoxide, C(6)H(11)NO(3)S) are described. Elemental and mass spectrometric analyses of the solid complex are consistent with [PtCl(2)(alliin)], or [PtCl(2)(C(6)H(11)NO(3)S)]. (13)C nuclear magnetic resonance (NMR), [(1)H-(15)N] two dimensional (2D) NMR and infrared spectroscopy indicate coordination of the ligand to Pt(II) through the N and S atoms. The complex is very soluble in dimethyl sulfoxide. Biological analysis for evaluation of a potential cytotoxic effect of the complex was performed using HeLa cells derived from human cervical adenocarcinoma. The complex presented moderate cytotoxic activity, inducing about 40% cell death at a concentration of 400 mol L(-1).