Comparative analysis of strut-and-tie models using Smooth Evolutionary Structural Optimization

The strut-and-tie models are widely used in certain types of structural elements in reinforced concrete and in regions with complexity of the stress state, called regions D, where the distribution of deformations in the cross section is not linear. This paper introduces a numerical technique to determine the strut-and-tie models using a variant of the classical Evolutionary Structural Optimization, which is called Smooth Evolutionary Structural Optimization. The basic idea of this technique is to identify the numerical flow of stresses generated in the structure, setting out in more technical and rational members of strut-and-tie, and to quantify their value for future structural design. This paper presents an index performance based on the evolutionary topology optimization method for automatically generating optimal strut-and-tie models in reinforced concrete structures with stress constraints. In the proposed approach, the element with the lowest Von Mises stress is calculated for element removal, while a performance index is used to monitor the evolutionary optimization process. Thus, a comparative analysis of the strut-and-tie models for beams is proposed with the presentation of examples from the literature that demonstrates the efficiency of this formulation. © 2013 Elsevier Ltd.

Faunistic analysis of Carabidae and Staphylinidae (Coleoptera) in five agroecosystems in northeastern São Paulo state, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Economic analysis of cucumber and lettuce intercropping under greenhouse in the winter-spring

A análise econômica complementa a avaliação da eficiência dos cultivos consorciados, considerando além da produção física das culturas, o preço dos produtos segundo sua classificação qualitativa e época do ano. Avaliou-se economicamente consórcios de alface crespa e pepino, em duas populações de plantas, no inverno-primavera, em casa de vegetação, em Jaboticabal, SP, Brasil. Foram calculados o custo operacional total (COT), a receita bruta (RB) e o lucro operacional (LO) das culturas do pepino e alface em monocultura e em consórcio. A mão-de-obra foi a componente com maior participação no COT das culturas em consórcio e monocultura. Maiores RB e LO foram observadas nos cultivos consorciados estabelecidos com o transplante da alface e do pepino no mesmo dia, independente da densidade populacional. Considerando-se o lucro operacional e o índice de uso eficiente da área, recomenda-se o cultivo consorciado com transplante da alface até 10 dias após o transplante (DAT) do pepino, com duas linhas, e ao 0 DAT do pepino cultivado com uma linha no canteiro

Three-Dimensional Finite Element Analysis of Vertical and Angular Misfit in Implant-Supported Fixed Prostheses

Purpose: Three-dimensional finite element analysis was used to evaluate the effect of vertical and angular misfit in three-piece implant-supported screw-retained fixed prostheses on the biomechanical response in the peri-implant bone, implants, and prosthetic components. Materials and Methods: Four three-dimensional models were fabricated to represent a right posterior mandibular section with one implant in the region of the second premolar (2PM) and another in the region of the second molar (2M). The implants were splinted by a three-piece implant-supported metal-ceramic prosthesis and differed according to the type of misfit, as represented by four different models: Control = prosthesis with complete fit to the implants; UAM (unilateral angular misfit) = prosthesis presenting unilateral angular misfit of 100 pm in the mesial region of the 2M; UVM (unilateral vertical misfit) = prosthesis presenting unilateral vertical misfit of 100 pm in the mesial region of the 2M; and TVM (total vertical misfit) = prosthesis presenting total vertical misfit of 100 pm in the platform of the framework in the 2M. A vertical load of 400 N was distributed and applied on 12 centric points by the software Ansys, ie, a vertical load of 150 N was applied to each molar in the prosthesis and a vertical load of 100 N was applied at the 2PM. Results: The stress values and distribution in peri-implant bone tissue were similar for all groups. The models with misfit exhibited different distribution patterns and increased stress magnitude in comparison to the control. The highest stress values in group UAM were observed in the implant body and retention screw. The groups UVM and TVM exhibited high stress values in the platform of the framework and the implant hexagon, respectively. Conclusions: The three types of misfit influenced the magnitude and distribution of stresses. The influence of misfit on peri-implant bone tissue was modest. Each type of misfit increased the stress values in different regions of the system. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:788-796

Identification and expression analysis of microRNAs and targets in the biofuel crop sugarcane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytogenetic analysis of A- and B-chromosomes of Prochilodus lineatus (Teleostei, Prochilodontidae) using different restriction enzyme banding and staining methods

Different cytogenetic techniques were used to analyse the chromosomes of Prochilodus lineatus with the main objective of comparing the base composition of A- and B-chromosomes. The results of digestion of chromosomes with 10 different restriction endonucleases (REs), silver staining, CMA(3) staining and C-banding indicated the existence of different classes of highly repetitive DNA in the A-set and also suggested the existence of compositional differences between the chromatin of A- and B-chromosomes. The 5-BrdU incorporation technique showed a late replicating pattern in all B-chromosomes and in some heterochromatic pericentromeric regions of A-chromosomes. The cleavage with RE BamHI produced a band pattern in all chromosomes of P. lineatus which permitted the tentative pairing of homologues in the karyotype of this species. We concluded that the combined use of the above techniques can contribute to the correct identification of chromosomes and the karyotypic analysis in fishes. on the basis of the results, some aspects of chromosome structure and the origin of the B-chromosomes in P. lineatus are discussed.

Comparative Strain Gauge Analysis of External and Internal Hexagon, Morse Taper, and Influence of Straight and Offset Implant Configuration

Purpose: The present study was designed to analyze strain distributions caused by varying the fixture-abutment design and fixture alignment.Materials and Methods: Three implants of external, internal hexagon, and Morse taper were embedded in the center of each polyurethane block in straight placement and offset placement. Four strain gauges (SGs) were bonded on the surface of polyurethane block, which was designated SG1 placed mesially adjacent to implant A, SG2 and SG3 were placed mesially and distally adjacent to the implant B and SG4 was placed distally adjacent to the implant C. The 30 superstructures' occlusal screws were tightened onto the Microunit abutments with a torque of 10 N cm using the manufacturers' manual torque-controlling device.Results: There were statistically significant differences in prosthetic connection (P value = 0.0074 < 0.5). There were no statistically significant differences in placement configuration/alignment (P value = 0.7812 > 0.5).Conclusion: The results showed fundamental differences in both conditions. There was no evidence that there was any advantage to offset implant placement in reducing the strain around implants. The results also revealed that the internal hexagon and Morse taper joints did not reduce the microstrain around implants. (Implant Dent 2011; 20:e24-e32)

Voltage-composition profile and synchrotron X-ray structural analysis of low and high temperature LixCoO2 host material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative analysis of spermiogenesis and sperm ultrastructure in Callichthyidae (Teleostei: Ostariophysi: Siluriformes)

Em Corydoradinae, a presença de espermátides junto com espermatozóides no lúmen dos túbulos testiculares sugere uma espermatogênese do tipo semicística, enquanto que em Callichthyinae a produção do esperma ocorre inteiramente dentro dos espermatocistos no epitélio germinativo, caracterizando a espermatogênese cística. A espermiogênese em Callichthyinae é caracterizada por um desenvolvimento inicial lateral do flagelo, pela presença de rotação nuclear em diferentes graus, formação de uma fossa nuclear excêntrica ou medial, formação de um canal citoplasmático, e presença de migração centriolar, sendo mais similar à espermiogênese do tipo I. em Corydoradinae, a espermiogênese é caracterizada pelo desenvolvimento excêntrico do flagelo, ausência de rotação nuclear, fossa nuclear excêntrica, formação de um canal citoplasmático, e ausência de migração centriolar, diferindo dos tipos descritos previamente. O processo de espermatogênese e espermiogênese em Corydoradinae e Callichthyinae revelaram caracteres únicos para cada subfamília, corroborando a hipótese de que as mesmas constituem grupos monofiléticos. em relação à ultraestrutura do esperma, a análise comparativa das espécies de Callichthyidae mostra que as características gerais encontradas nos espermatozóides foram similares, reforçando a hipótese de monofilia da família.

Genetic analysis of phosphoprotein and matrix protein of rabies viruses isolated in Brazil

To investigate the genetic characteristics of phosphoprotein (P) and matrix protein (M) genes of variable rabies virus (RV) prevalent in Brazil, the authors genetically characterized the P and M genes from 30 Brazilian RV field isolates. Phylogenetic analysis based on the P and M genes revealed the presence of six RV variants that consisted primarily of three insectivorous bats, the vampire bat, dog and fox in Brazil. Specific amino acid substitutions corresponding to these phylogenetic lineages were observed, with ASP(42) and GlU(62) in the P protein found to be characteristic of Brazilian chiroptera- and carnivora-related RVs, respectively. Amino acid sequence motifs predicted to associate with a viral function in the P and M proteins were conserved among Brazilian RV variants.

A probabilistic model for elastic-plastic fracture analysis of plane and axisymmetric structures

This work presents a methodology for elastic-plastic fracture reliability analysis of plane and axisymmetric structures. The structural reliability analysis is accomplished by means of the FORM analytical method. The virtual crack extension technique based on a direct minimization of potencial energy is utililized for the calculation of the energy release rate. Results are presented to illustrate the performance of the adopted methodology.

Comparative genomic hybridization analysis of benign and invasive male breast neoplasms

Comparative genomic hybridization (CGH) analysis was performed for the identification of chromosomal imbalances in two benign gynecomastias and one malignant breast carcinoma derived from patients with male breast disease and compared with cytogenetic analysis in two of the three cases. CGH analysis demonstrated overrepresentation of 8q in all three cases. One case of gynecomastia presented gain of 1p34.3similar topter. 11p14similar toq12. and 17p11.2similar toqter, and loss of 1q41similar toqter and 4q33similar toqter. The other gynecomastia presented del(1)(q41) as detected by both cytogenetic and CGH analysis. CGH analysis of the invasive ductal carcinoma confirmed a gain of 17p11.2similar toqter previously detected by cytogenetic analysis. These regions showed some similarity in their pattern of imbalance to the chromosomal alterations described in female and male breast cancer. (C) 2002 Elsevier B.V. All rights reserved.

Anatomopathological analysis of sentinel and nonsentinel lymph nodes in breast cancer: Hematoxylin-eosin versus immunohistochemistry

The authors compare the detection of metastases in sentinel lymph nodes (SLNs) and nonsentinel lymph nodes (NSLNs) using hematoxvlin-eosin (HE) staining versus immunohistochemistry (IHC). Thirty-six patients with breast carcinoma undergo exeresis of the primary tumor and of 50 SLNs and 491 NSLNs. Sentinel lymph nodes are sectioned into transverse slices of 2- to 3-mm thickness, and a cytologic smear and a frozen section were obtained from each slice. The slices are completely cut into serial sections at 100-mu m intervals. Two consecutive 4-mu m-thick sections are then obtained from each level and were prepared for HE staining and IHC. Nonsentinel lymph nodes are evaluated similarly to SLNs. The authors obtain 4076 SLN sections and 32 012 NSLN sections, fora total of 36 088 sections. A comparison of HE staining versus IHC based on the total number of sections shows a sensitivity of 93.8%, a negative predictive value of 98.9%, and an accuracy of 99.1 %. The values obtained by HE staining are similar to those obtained by IHC.