Magnetic interactions and spin-reversal mechanism in ErMn1-xCoxO3-delta samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the fretting fatigue behaviour of commercially pure titanium

Fretting fatigue occurs when the contact surfaces of two components undergo small oscillatory movement while they are subjected to a clamping force. A cyclic external load gives rise to the early initiation of fatigue cracks, thus reducing their service life. In this paper, the fretting fatigue behaviour of commercially pure titanium flat samples (1.5 mm thick) is evaluated. A fretting device composed of a frame, load cell, and two screw-mounted cylindrical fretting pads with convex extremities was built and set to a servo-hydraulic testing machine. The fatigue tests were conducted under load control at a frequency of 10 Hz and stress ratio R = 0.1, with various contact load values applied to the fretting pads. Additional tests under inert environment allowed assessing the role of oxidation on the wear debris formation. The fracture surfaces and fretting scars were analysed via scanning electron microscopy in order to evaluate the surface damage evolution and its effect on the fatigue crack features. The effect of the fretting condition on the S-N curve of the material in the range of 10(4)-10(6) cycles is described. Fatigue crack growth calculations allowed estimating the crack initiation and propagation lives under fretting conditions. The effect of the fretting condition in fatigue life is stronger for the lower values of cyclic stress and does not seem to depend on the contact loading value.

Evaluation of laryngeal mask as an alternative to endotracheal intubation in cats anesthetized under spontaneous or controlled ventilation

Objective To compare the cardiorespiratory effects and incidence of gastroesophageal reflux with the use of a laryngeal mask airway (LMA) or endotracheal tube (ET) in anesthetized cats during spontaneous (SV) or controlled ventilation (CV).Study design Prospective randomized experimental trial.Animals Thirty-two adult crossbred cats, weighing 2.7 +/- 0.4 kg.Methods the cats were sedated with intramuscular (IM) methotrimeprazine (0.5 mg kg(-1)) and buprenorphine (0.005 mg kg(-1)), followed 30 minutes later by induction of anesthesia with intravenous (IV) thiopental (12.5-20 mg kg(-1)). An ET was used in 16 cats and an LMA in the remaining 16 animals. Anesthesia was maintained with 0.5 minimum alveolar concentration (0.6%) of halothane in oxygen using a Mapleson D breathing system. Cats in both groups were further divided into two equal groups (n = 8), undergoing either SV or CV. Neuromuscular blockade with pancuronium (0.06 mg kg(-1)) was used to facilitate CV. Heart and respiratory rates, direct arterial blood pressure, capnometry (PE'CO2) and arterial blood gases were measured. Gastric reflux and possible aspiration was investigated by intragastric administration of 5 mL of radiographic contrast immediately after induction of anesthesia. Cervical and thoracic radiographs were taken at the end of anesthesia. Data were analyzed using ANOVA followed by Student-Newman-Keuls, Kruskal-Wallis or Friedman test where appropriate.Results Values for PaCO2 and PE'CO2 were higher in spontaneously breathing cats with the LMA when compared with other groups. Values of PaO2 and hemoglobin oxygen saturation did not differ between groups. Gastroesophageal reflux occurred in four of eight and two of eight cats undergoing CV with ET or LMA, respectively. There was no tracheal or pulmonary aspiration in any cases.Conclusions and clinical relevance the use of an LMA may be used as an alternative to endotracheal intubation in anesthetized cats. Although aspiration was not observed, gastric reflux may occur in mechanically ventilated animals.

O treinamento nos valores da V200, FCpico e distância percorrida de cavalos da raça Árabe e Crioula

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Weak Maximum Principle for Optimal Control Problems with Nonsmooth Mixed Constraints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

Objectives. This study evaluated the effect of thermal- and mechanical-cycling on the shear bond strength of three low-fusing glassy matrix dental ceramics to commercial pure titanium (cpTi) when compared to conventional feldspathic ceramic fused to gold alloy.Methods. Metallic frameworks (diameter: 5 min, thickness: 4 mm) (N = 96, n = 12 per group) were cast in cpTi and gold alloy, airborne particle abraded with 150 mu m aluminum oxide. Low-fusing glassy matrix ceramics and a conventional feldspathic ceramic were fired onto the alloys (thickness: 4mm). Four experimental groups were formed; Gr1 (control group): Vita Omega 900-Au-Pd alloy; Gr2: Ticeram-cpTi; Gr3: Super Porcelain Ti-22-cpTi and G4: Vita Titankeramik-cpTi. While half of the specimens from each ceramic-metal combination were randomly tested without aging (water storage at 37 C for 24h only), the other half were first thermocycled (6000 cycles, between 5 and 55 C, dwell time: 13 s) and then mechanically loaded (20,000 cycles under SON load, immersion in distilled water at 37 C). The ceramic-alloy interfaces were loaded under shear in a universal test machine (cross-head speed: 0.5 mm/min) until failure occur-red. Failure types were noted and the interfaces of the representative fractured specimens from each group were examined with stereo microscope and scanning electron microscope (SEM). in an additional study (N = 16, n = 2 per group), energy dispersive X-ray spectroscopy (EDS) analysis was performed from ceramic-alloy interfaces. Data were analyzed using ANOVA and Tukey's test.Results. Both ceramic-metal combinations (p < 0.001) and aging conditions (p < 0,001) significantly affected the mean bond strength values. Thermal- and mechanical-cycling decreased the bond strength (MPa) results significantly for Gr3 (33.4 +/- 4.2) and Gr4 (32.1 +/- 4.8) when compared to the non-aged groups (42.9 +/- 8.9, 42.4 +/- 5.2, respectively). Gr1 was not affected significantly from aging conditions (61.3 +/- 8.4 for control, 60.7 +/- 13.7 after aging) (p > 0.05). Stereomicroscope images showed exclusively adhesive failure types at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface but with a visible dark titanium oxide layer in Groups 2-4 except Gr1 where remnants of bonder ceramic was visible. EDS analysis from the interfacial zone for cpTi-ceramic groups showed predominantly 34.5-85.1% O(2) followed by 1.1-36.7% Aland 0-36.3% Si except for Super Porcelain Ti-22 where a small quantity of Ba (1.4-8.3%), S (0.7%) and Sn (35.3%) was found. In the Au-Pd alloy-ceramic interface, 56.4-69.9% O(2) followed by 15.6-26.2% Si, 3.9-10.9% K, 2.8-6% Na, 4.4-9.6% Al and 0-0.04% Mg was observed.Significance. After thermal-cycling for 6000 times and mechanical-cycling for 20,000 times, Triceram-cpTi combination presented the least decrease among other ceramic-alloy combinations when compared to the mean bond strength results with Au-Pd alloy-Vita Omega 900 combination. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Spin-orbit coupling in the superconducting phase and DDW states of high-T-c cuprates

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quark sea structure functions of the nucleon in a statistical model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção e qualidade fisiológica de sementes de feijão-vagem em função de fontes e doses de nitrogênio

Estudaram-se os efeitos da aplicação de cinco doses e três fontes de nitrogênio sobre a produção e a qualidade fisiológica de sementes de feijão-vagem, cv. Macarrão Trepador - Hortivale, no período de setembro/2000 a fevereiro/2001, no Centro de Ciências Agrárias da Universidade Federal da Paraíba, em Areia. O delineamento experimental utilizado foi em blocos casualizados, com os tratamentos distribuídos em esquema fatorial (3 x 5) + 1, correspondendo às fontes (nitrato de cálcio, sulfato de amônio e uréia) e doses (0, 25, 50, 75 e 100kg.ha-1) de nitrogênio, e um tratamento adicional sem adubação (testemunha), com quatro repetições. As fontes nitrato de cálcio e sulfato de amônio, na dose de 100kg.ha-1, e uréia, na dose de 55kg.ha-1 de N, proporcionaram as produções de sementes no feijão-vagem de 2.571, 3.219 e 2.221kg.ha-1, respectivamente. O nitrogênio, em todas as fontes, influenciou positivamente a germinação e o vigor (índice de velocidade de germinação e emergência em campo) da semente do feijão-vagem. As doses de 68,8 e 49kg.ha-1 de N, fontes nitrato de cálcio e uréia foram responsáveis pelos valores máximos para a porcentagem de germinação, 72 e 75%, respectivamente. Para a fonte sulfato de amônio ocorreu aumento linear da porcentagem de germinação, à medida que se elevaram as doses de nitrogênio, sendo que na dose de 100kg.ha-1 obteve-se um porcentual de 84%. O índice de velocidade de germinação apresentou valores mais elevados, 6,0; 7,7 e 6,9 nas doses de 49; 71 e 53kg.ha-1 de N, fontes nitrato de cálcio, uréia e sulfato de amônio, respectivamente. A emergência em campo aumentou linearmente com elevação das doses de N (fonte nitrato de cálcio), sendo a emergência máxima (70%) obtida na dose de 100 kg ha-1 de N em cada fonte. O sulfato de amônio deve ser recomendado como fonte de N, em programas de produção de sementes de feijão-vagem.

Efeito da adição simultânea de sementes e dopantes na microestrutura e propriedade dielétrica da cerâmica 0,93 PZN - 0,07 BT

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Serum leptin level in hypertensive middle-aged obese women

The mechanism by which adiposity can raise blood pressure is not fully understood. Leptin has been suggested as a possible cause of the arterial hypertension in obese subjects because leptin induces an increase in sympathetic activity. The aim of the present study is to evaluate serum leptin level, blood pressure, lipid profile, blood glucose, and insulin in obese women. Leptin, total cholesterol, low-density lipoprotein (LDL) cholesterol, and triglycerides were measured. Serum leptin was markedly higher in hypertensive obese women (92.3 +/- 22 ng/mL, n = 7) as compared with normotensive obese women (37.7 +/- 11 ng/mL, n = 7). Similarly, total cholesterol and LDL cholesterol were significantly elevated in the hypertensive group. No changes were observed in triglycerides and high-density lipoprotein cholesterol concentration between the 2 groups. There were no significant differences in plasma insulin concentration or blood glucose in both groups. In conclusion, our findings suggest a link among dyslipidemia, leptin level, and hypertension that might be relevant to the development of cardiovascular disease in obese subjects.

Influence of seed particle frequency on the phase formation and on the microstructure of 0.88 PZN-0.07 BT-0.05 PT ceramic

The Pechini method as well as the simultaneous addition of seeds particles and dopant solutions of BaTiO3 (BT) and PbTiO3 (PT) were used to prepare the perovskite phase 0.88 PZN-0.07 BT-0.05 PT. To study the influence of seed particle frequency on the synthesis of the PZN ceramic, two ranges of seed particle size were used: the range from 30 to 100 nm, termed small seed particles (frequency of 10(15) particles/cm(3)); and the range from 100 to 900 nm, termed large seed particles (frequency of 10(13) particles/cm(3)). The crystalline nuclei size influenced the calcining process, the sintering process and the microstructure. Samples prepared with lower seed frequency displayed more amount of pyroclore phase, need higher temperatures for sintering and showed a more heterogeneous microstructure with poor dielectric properties. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Titania-based organic-inorganic hybrid planar waveguides

Eu3+ -doped titania-silica planar waveguides were prepared from tetraethylorthotitanate (TEOT) and modified silane 3-amino-propyltriethoxysilane (APTS). Films were deposited on borosilicate glass substrates by a dip-coating technique. The refractive index, the thickness and the total attenuation coefficient of the waveguides were measured at 632.8 and 1550 nm by prism coupling technique. Starting from pure titania films, the addition of modified silane leads to a decrease in the refractive index and an increase in thickness. Squared electric field simulation has shown that the light confinement in the waveguide increases with the silane content of the so]. Emission spectra present a broad emission band due to the modified silane and EU emission transitions arising mainly from the D-5(0) level to the F-7(J) (J = 0-4) manifolds. The dependence of transition intensities and excited state lifetimes on the initial composition and also on the heat treatment performed was interpreted in terms of structural changes occurring during the preparation process. (C) 2002 Elsevier B.V. B.V. All rights reserved.

A Semi-Tethered Test for Power Assessment in Running

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Renormalization of the one-pion-exchange interaction

A renormalization scheme for the nucleon-nucleon (NN) interaction based on a subtracted T-matrix equation is proposed and applied to the one-pion-exchange potential supplemented by contact interactions. The singlet and triplet scattering lengths are given to fix the renormalized strengths of the contact interactions. With only one scaling parameter (μ), the results show an overall very good agreement with neutron-proton data, particularly for the observables related to the triplet channel. The agreement is qualitative in the 1 S0 channel. Between the low-energy NN observables we have examined, the mixing parameter of the 3S1-3D1 states is the most sensitive to the scale. The scheme is renormalization group invariant for μ → ∞. © 1999 Elsevier Science B.V. All rights reserved.