Clarke's alpha, beta, and zero components: A possible approach for the conceptual design of instrumentation compatible with IEEE Std. 1459-2000

This paper explains the conceptual design of instrumentation that measures electric quantities defined in the Std. 1459-2000. It is shown how the instantaneous-space-phasor approach, based on alpha, beta, 0 components, can be used to monitor electric energy flow, evaluate the utilization of transmission line, and quantify the level of harmonic pollution injected by nonlinear loads.

Clarke's alpha, beta and zero components: A possible approach for the conceptual design of instrumentation compatible with IEEE Std. 1459-2000

The paper explains the conceptual design of instrumentation that measures electric quantities defined in the trial-use Std. 1459-2000. It is shown how the Instantaneous-Space-Phasor (ISP) approach, based on α, β, 0 components, can be used to monitor electric energy flow, evaluate the utilization of transmission line and quantify the level of harmonic pollution injected by nonlinear loads.

Virtual instrumentation applied to the implementation of IEEE STD 1459-2000 power definitions

This paper discusses the utilization of Virtual Instrumentation to the implementation and evaluation of different power definitions, so that classical formulations and new definitions can be compared without the necessity of acquiring different power meters or analyzers. Accordingly, the definitions of IEEE Standard 1459-2000 for the measurement of power quantities under distorted and unbalanced situations, have been digitally implemented. Thus, several power and power factor components related to the decomposition of the measured voltage and current signals have been obtained. The proposed PC-based Virtual Instrument uses a high performance acquisition board and isolated sensors and transducers. All digital algorithms and routines have been implemented by means of a graphical development system. Regarding to the implementation of STD 1459, this paper also proposes several different algorithms to the required decompositions of voltage, current and power components. © 2005 IEEE.

Análise da máquina de indução trifásica através das grandezas de Buchholz-Goodhue aplicando os vetores espaciais instantâneos nas condições de desequilíbrio e distorção conforme a IEEE 1459-2000

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retardadores de crescimento na produção de plantas floridas envasadas de açafrão-da-cochinchina

A introdução de novos produtos na floricultura brasileira é importante para o crescimento do setor. O açafrão-da-cochinchina (Curcuma alismatifolia) possui inflorescência e folhagem altamente decorativas e grande potencial para produção como florífera envasada, com o auxílio de retardadores de crescimento, usados na produção de plantas compactas e atrativas. Avaliou-se o efeito de retardadores de crescimento na produção de açafrão-da-cochinchina `Pink', de 3/12/2004 a 28/4/2005, sob ambiente protegido, em Holambra (SP). Instalou-se experimento em blocos casualizados com três repetições e onze tratamentos: controle, paclobutrazol (20; 25; 30 e 35 mg i.a./vaso, via substrato), duas, três e cinco pulverizações de daminozide na concentração de 2,125 g L-1 e duas, três e cinco pulverizações de solução de daminozide (1,275 g L-1) mais chlormequat (0,2 g L-1). O propágulo foi plantado em vaso plástico (1,0 L) com substrato comercial e fertirrigado diariamente. Paclobutrazol (35 mg i.a./vaso) reduziu significativamente a altura da parte aérea e da folhagem e o comprimento da haste floral, sem alterar o comprimento da inflorescência e atrasar o ciclo de produção. Entretanto, as plantas não ficaram suficientemente compactas para atender às exigências de qualidade do mercado. Os demais retardadores estudados não afetaram significativamente a altura da folhagem e o comprimento da haste floral comparado ao controle.

Reaction of sugarcane genotypes to Pratylenchus brachyurus and P. zeae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Economic valuation of collecting water to billing in the aspersion irrigated bean in the no tillage system and conventional crop

The law's project n.676/2000 approved the collecting of billing water for farmers in a maximum foreseen value of US$ 0.01 m(-3) of extracted water in the São Paulo State. As the irrigated agriculture is the activity that consumes more water, the farmers profitability can be affected. This work was to analyze the economic impact of billing water in the aspersion irrigated bean crop to consider the system of conventional production and no tillage system in the Paranapanema municipal district, São Paulo State, Brazil. The indicators used to analyze the economic results were unit variable cost, market price and unit profitability. The results showed that for the aspersion irrigated bean crop in conventional system, the participation of cost to the recourse water in cost variable totality was of 2.5% and in no tillage system the participation was of 2.2%. The fall of profitability just the billing water in conventional crop system and in no tillage system was US$ 0.01 kg(-1).

Changes on emitter discharge under different water temperature and pressure

The study was conducted at the Research Laboratory of Hydraulic and Irrigation Group in the Rural Engineering Department, Technical University of Madrid (Universidad Politecnica de Madrid), Madrid, Spain. Water temperatures of 20, 30, 40 degrees C and system pressures often encountered in irrigation practices of 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190 and 200 k Pa were applied to determine the effects of different water temperatures and pressures on emitter discharge. Non-pressure compensating in-line emitter which has turbulent flow regime with a long-path (labyrinth), emitter discharge was 4 L h(-1) at system pressure of 100 kPa according to the manufacturer recommended, was used. Emitters were spaced 20 cm along the drip laterals with 16 mm diameter. Discharge equations and coefficients of variation related to temperatures of 20, 30 and 40 degrees C were obtained as q = 0.375H(0.51), q = 0.358H(0.52), q = 0.346H(0.53) and 2.68, 2.09, 3.65, respectively. Discharge of the emitter was affected by different system pressures and increased as potentially (R = 0993-0996). In general. the emitter discharge increased with increasing temperature. However, especially in the common system pressures of 90-120 k Pa, differences of obtained emitter discharges between the different water temperatures were not significant (1%).

Yeasts isolated from a fungus-growing ant nest, including the description of Trichosporon chiarellii sp nov., an anamorphic basidiomycetous yeast

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efficiency of seed treatment with fungicides in castor bean crop genotypes

With the objective of assessing castor bean genotypes in relation to the influence of seeds treatment on agronomic characteristics and physiological quality of seeds, two experiments were conducted between November, 2005 and March, 2006. In the first study, experimental design used was randomized complete blocks, in factorial scheme (2 x 10), by comparing Lyra hybrid and AL Guarany 2002 cultivar and nine fungicides, including its mixtures and test, with four repetitions. Plant height, stem diameter, medium yield and observation of diseases incidence were evaluated. In the second study, conducted in randomized entirely design, in factorial scheme 2 x 10 with four repetitions, Savana and AL Guarany 2002 genotypes were analyzed, using the same fungicides. Germination, infected and dead seeds, vigor, initial moisture content and simulation of field emergency and seeds sanitary quality were also evaluated. The results obtained point that there is positive influence of seed treatment on agronomic characteristics in castor bean crop, increasing grain yield for AL Guarany cultivar and Lyra hybrid. In the analysis of seed quality, it was observed that seed treatments with fungicides and their mixtures provided superior percentages of germination and vigor, reduced the number of infected and dead seeds and increased seeds emergency for Guarany 2002 cultivar and Savana hybrid.

Corn seed treatment with naphthalic anhydride against isoxaflutole phytotoxication action

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Can native vegetation recover after slash pine cultivation in the Brazilian Savanna?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic differences between strains of Biomphalaria glabrata (Planorbidae) that are susceptible and unsusceptible to schistosomiasis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validação de método analítico por espectrofotometria UV para sistema emulsionado lipídico contendo benznidazol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Storage temperature and quality of red mombin fruits (Spondias purpurea L.)

The aim was to study the effect of different storage temperatures on quality of red mombin fruit. The red mombin fruits were obtained from the Company CEAGESP/São Paulo/Brazil and transported in cool boxes to the laboratory, where they were selected on the base of appearance, maturity lack of physical damage, sanitized in 50 ppm chlorine-free solution and packaged in polystyrene trays wrapped with film of polyvinyl chloride (PVC). The experiment was a completely randomized design with three temperatures (4, 8 and 25 degrees C) and 5 time intervals (0, 2, 4, 6 and 8 days after the experiment installation). In each survey firmness, titratable acidity, soluble solids, ascorbic acid content, the skin color and also the release of CO(2) by the fruit over time were evaluated. It was observed that low temperatures prolong the fruits shelf life and the storage temperature influences the characteristics, the temperature of 8 degrees C was most suitable for the storage of red mombin fruits. Besides, the fruit color was a good indicator of changes in the pulp during storage.